From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756631AbcA2Q1n (ORCPT ); Fri, 29 Jan 2016 11:27:43 -0500 Received: from down.free-electrons.com ([37.187.137.238]:53648 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S932208AbcA2Q0r (ORCPT ); Fri, 29 Jan 2016 11:26:47 -0500 From: Gregory CLEMENT To: "David S. Miller" , linux-kernel@vger.kernel.org, netdev@vger.kernel.org, Thomas Petazzoni Cc: Jason Cooper , Andrew Lunn , Sebastian Hesselbarth , Gregory CLEMENT , linux-arm-kernel@lists.infradead.org, Lior Amsalem , Nadav Haklai , Marcin Wojtas , Russell King - ARM Linux , Willy Tarreau Subject: [PATCH net 5/6] net: mvneta: The mvneta_percpu_elect function should be atomic Date: Fri, 29 Jan 2016 17:26:06 +0100 Message-Id: <1454084767-24715-6-git-send-email-gregory.clement@free-electrons.com> X-Mailer: git-send-email 2.5.0 In-Reply-To: <1454084767-24715-1-git-send-email-gregory.clement@free-electrons.com> References: <1454084767-24715-1-git-send-email-gregory.clement@free-electrons.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Electing a CPU must be done in an atomic way: it should be done after or before the removal/insertion of a CPU and this function is not reentrant. During the loop of mvneta_percpu_elect we associates the queues to the CPUs, if there is a topology change during this loop, then the mapping between the CPUs and the queues could be wrong. During this loop the interrupt mask is also updating for each CPUs, It should not be changed in the same time by other part of the driver. This patch adds spinlock to create the needed critical sections. Signed-off-by: Gregory CLEMENT --- drivers/net/ethernet/marvell/mvneta.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index 1ed813d478e8..3358c9a70467 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -370,6 +370,8 @@ struct mvneta_port { struct net_device *dev; struct notifier_block cpu_notifier; int rxq_def; + /* protect */ + spinlock_t lock; /* Core clock */ struct clk *clk; @@ -2855,6 +2857,11 @@ static void mvneta_percpu_elect(struct mvneta_port *pp) { int online_cpu_idx, max_cpu, cpu, i = 0; + /* Electing a CPU must done in an atomic way: it should be + * done after or before the removal/insertion of a CPU and + * this function is not reentrant. + */ + spin_lock(&pp->lock); online_cpu_idx = pp->rxq_def % num_online_cpus(); max_cpu = num_present_cpus(); @@ -2893,6 +2900,7 @@ static void mvneta_percpu_elect(struct mvneta_port *pp) i++; } + spin_unlock(&pp->lock); }; static int mvneta_percpu_notifier(struct notifier_block *nfb, @@ -2947,8 +2955,13 @@ static int mvneta_percpu_notifier(struct notifier_block *nfb, case CPU_DOWN_PREPARE: case CPU_DOWN_PREPARE_FROZEN: netif_tx_stop_all_queues(pp->dev); + /* Thanks to this lock we are sure that any pending + * cpu election is done + */ + spin_lock(&pp->lock); /* Mask all ethernet port interrupts */ on_each_cpu(mvneta_percpu_mask_interrupt, pp, true); + spin_unlock(&pp->lock); napi_synchronize(&port->napi); napi_disable(&port->napi); -- 2.5.0