[RESEND v7 1/5] mfd: hi655x: Add document for mfd hi665x PMIC

[Chen Feng <puck.chen@hisilicon.com>]

DT bindings for hisilicon hi655x MFD PMIC chip.

Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Fei Wang <w.f@huawei.com>
Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Reviewed-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
 .../devicetree/bindings/mfd/hisilicon,hi655x.txt   | 27 ++++++++++++++++++++++
 1 file changed, 27 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt

diff --git a/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt b/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
new file mode 100644
index 0000000..5edc310
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
@@ -0,0 +1,27 @@
+Hisilicon hi655x Power Management Integrated Circuit (PMIC)
+
+The hardware layout for access PMIC Hi655x from AP SoC Hi6220.
+Between PMIC Hi655x and Hi6220, the physical signal channel is SSI.
+We can use memory-mapped I/O to communicate.
+
++----------------+             +-------------+
+|                |             |             |
+|    Hi6220      |   SSI bus   |   Hi655x    |
+|                |-------------|             |
+|                |(REGMAP_MMIO)|             |
++----------------+             +-------------+
+
+Required properties:
+- compatible: Should be "hisilicon,hi655x-pmic"
+- reg: Base address of PMIC on hi6220 soc
+- interrupt-controller: Hi655x has internal IRQs (has own IRQ domain).
+- pmic-gpios: The gpio used by PMIC irq.
+
+Example:
+	pmic: pmic@f8000000 {
+		compatible = "hisilicon,hi655x-pmic";
+		reg = <0x0 0xf8000000 0x0 0x1000>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	}
-- 
1.9.1