From: Tomasz Nowicki <tn@semihalf.com>
To: bhelgaas@google.com, arnd@arndb.de, will.deacon@arm.com,
catalin.marinas@arm.com, rjw@rjwysocki.net,
hanjun.guo@linaro.org, Lorenzo.Pieralisi@arm.com,
okaya@codeaurora.org, jiang.liu@linux.intel.com,
Stefano.Stabellini@eu.citrix.com
Cc: robert.richter@caviumnetworks.com, mw@semihalf.com,
Liviu.Dudau@arm.com, ddaney@caviumnetworks.com,
wangyijing@huawei.com, Suravee.Suthikulpanit@amd.com,
msalter@redhat.com, linux-pci@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-acpi@vger.kernel.org,
linux-kernel@vger.kernel.org, linaro-acpi@lists.linaro.org,
jchandra@broadcom.com, jcm@redhat.com,
Tomasz Nowicki <tn@semihalf.com>
Subject: [PATCH V4 05/23] x86, pci, ecam: mmconfig_64.c becomes default implementation for ECAM driver.
Date: Thu, 4 Feb 2016 18:28:43 +0100 [thread overview]
Message-ID: <1454606941-9523-6-git-send-email-tn@semihalf.com> (raw)
In-Reply-To: <1454606941-9523-1-git-send-email-tn@semihalf.com>
mmconfig_64.c functions responsible for ECAM regions mapping
are generic enough to use them for other architectures, GENERIC_ECAM_MAP
should be selected in that case (like 64bit x86). Some hosts may need
arch-specific mapping logic, thus they are obligated to provide own
implementation and resign GENERIC_ECAM_MAP feature (like 32bit x86 does).
Note, we leaved x86-specific PCI config accessors in the corresponding files.
Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
Tested-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Duc Dang <dhdang@apm.com>
Tested-by: Dongdong Liu <liudongdong3@huawei.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Graeme Gregory <graeme.gregory@linaro.org>
Tested-by: Sinan Kaya <okaya@codeaurora.org>
---
arch/x86/Kconfig | 1 +
arch/x86/include/asm/pci_x86.h | 4 ---
arch/x86/pci/mmconfig_64.c | 55 ---------------------------------------
drivers/acpi/mcfg.c | 2 --
drivers/pci/Kconfig | 3 +++
drivers/pci/ecam.c | 59 +++++++++++++++++++++++++++++++++++++++++-
include/linux/ecam.h | 6 +++++
7 files changed, 68 insertions(+), 62 deletions(-)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index a74acce..15674b9 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -65,6 +65,7 @@ config X86
select GENERIC_CMOS_UPDATE
select GENERIC_CPU_AUTOPROBE
select GENERIC_EARLY_IOREMAP
+ select GENERIC_ECAM_MAP if X86_64
select GENERIC_FIND_FIRST_BIT
select GENERIC_IOMAP
select GENERIC_IRQ_PROBE
diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h
index 26e7dd4..6e14518 100644
--- a/arch/x86/include/asm/pci_x86.h
+++ b/arch/x86/include/asm/pci_x86.h
@@ -122,10 +122,6 @@ extern int pci_legacy_init(void);
extern void pcibios_fixup_irqs(void);
/* pci-mmconfig.c */
-extern int __init pci_mmcfg_arch_init(void);
-extern void __init pci_mmcfg_arch_free(void);
-extern int pci_mmcfg_arch_map(struct pci_mmcfg_region *cfg);
-extern void pci_mmcfg_arch_unmap(struct pci_mmcfg_region *cfg);
extern int pci_mmconfig_insert(struct device *dev, u16 seg, u8 start, u8 end,
phys_addr_t addr);
diff --git a/arch/x86/pci/mmconfig_64.c b/arch/x86/pci/mmconfig_64.c
index d0c48eb..fd356cc 100644
--- a/arch/x86/pci/mmconfig_64.c
+++ b/arch/x86/pci/mmconfig_64.c
@@ -90,58 +90,3 @@ int pci_mmcfg_write(unsigned int seg, unsigned int bus,
return 0;
}
-
-static void __iomem *mcfg_ioremap(struct pci_mmcfg_region *cfg)
-{
- void __iomem *addr;
- u64 start, size;
- int num_buses;
-
- start = cfg->address + PCI_MMCFG_BUS_OFFSET(cfg->start_bus);
- num_buses = cfg->end_bus - cfg->start_bus + 1;
- size = PCI_MMCFG_BUS_OFFSET(num_buses);
- addr = ioremap_nocache(start, size);
- if (addr)
- addr -= PCI_MMCFG_BUS_OFFSET(cfg->start_bus);
- return addr;
-}
-
-int __init pci_mmcfg_arch_init(void)
-{
- struct pci_mmcfg_region *cfg;
-
- list_for_each_entry(cfg, &pci_mmcfg_list, list)
- if (pci_mmcfg_arch_map(cfg)) {
- pci_mmcfg_arch_free();
- return 0;
- }
-
- return 1;
-}
-
-void __init pci_mmcfg_arch_free(void)
-{
- struct pci_mmcfg_region *cfg;
-
- list_for_each_entry(cfg, &pci_mmcfg_list, list)
- pci_mmcfg_arch_unmap(cfg);
-}
-
-int pci_mmcfg_arch_map(struct pci_mmcfg_region *cfg)
-{
- cfg->virt = mcfg_ioremap(cfg);
- if (!cfg->virt) {
- pr_err(PREFIX "can't map MMCONFIG at %pR\n", &cfg->res);
- return -ENOMEM;
- }
-
- return 0;
-}
-
-void pci_mmcfg_arch_unmap(struct pci_mmcfg_region *cfg)
-{
- if (cfg && cfg->virt) {
- iounmap(cfg->virt + PCI_MMCFG_BUS_OFFSET(cfg->start_bus));
- cfg->virt = NULL;
- }
-}
diff --git a/drivers/acpi/mcfg.c b/drivers/acpi/mcfg.c
index fad9917..745b83e 100644
--- a/drivers/acpi/mcfg.c
+++ b/drivers/acpi/mcfg.c
@@ -10,8 +10,6 @@
#include <linux/acpi.h>
#include <linux/ecam.h>
-#include <asm/pci_x86.h> /* Temp hack before refactoring arch-specific calls */
-
#define PREFIX "MCFG: "
int __init acpi_parse_mcfg(struct acpi_table_header *header)
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 9950248..dd26f39 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -33,6 +33,9 @@ config PCI_ECAM
config HAVE_PCI_ECAM
bool
+config GENERIC_ECAM_MAP
+ bool
+
config PCI_DEBUG
bool "PCI Debugging"
depends on PCI && DEBUG_KERNEL
diff --git a/drivers/pci/ecam.c b/drivers/pci/ecam.c
index d221dba..7bc75af 100644
--- a/drivers/pci/ecam.c
+++ b/drivers/pci/ecam.c
@@ -16,7 +16,6 @@
#include <linux/ecam.h>
#include <asm/io.h>
-#include <asm/pci_x86.h> /* Temp hack before refactoring arch-specific calls */
#define PREFIX "PCI: "
@@ -24,6 +23,64 @@ static DEFINE_MUTEX(pci_mmcfg_lock);
LIST_HEAD(pci_mmcfg_list);
+#ifdef CONFIG_GENERIC_ECAM_MAP
+
+static void __iomem *mcfg_ioremap(struct pci_mmcfg_region *cfg)
+{
+ void __iomem *addr;
+ u64 start, size;
+ int num_buses;
+
+ start = cfg->address + PCI_MMCFG_BUS_OFFSET(cfg->start_bus);
+ num_buses = cfg->end_bus - cfg->start_bus + 1;
+ size = PCI_MMCFG_BUS_OFFSET(num_buses);
+ addr = ioremap_nocache(start, size);
+ if (addr)
+ addr -= PCI_MMCFG_BUS_OFFSET(cfg->start_bus);
+ return addr;
+}
+
+int __init pci_mmcfg_arch_init(void)
+{
+ struct pci_mmcfg_region *cfg;
+
+ list_for_each_entry(cfg, &pci_mmcfg_list, list)
+ if (pci_mmcfg_arch_map(cfg)) {
+ pci_mmcfg_arch_free();
+ return 0;
+ }
+
+ return 1;
+}
+
+void __init pci_mmcfg_arch_free(void)
+{
+ struct pci_mmcfg_region *cfg;
+
+ list_for_each_entry(cfg, &pci_mmcfg_list, list)
+ pci_mmcfg_arch_unmap(cfg);
+}
+
+int pci_mmcfg_arch_map(struct pci_mmcfg_region *cfg)
+{
+ cfg->virt = mcfg_ioremap(cfg);
+ if (!cfg->virt) {
+ pr_err(PREFIX "can't map MMCONFIG at %pR\n", &cfg->res);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+void pci_mmcfg_arch_unmap(struct pci_mmcfg_region *cfg)
+{
+ if (cfg && cfg->virt) {
+ iounmap(cfg->virt + PCI_MMCFG_BUS_OFFSET(cfg->start_bus));
+ cfg->virt = NULL;
+ }
+}
+#endif /* CONFIG_GENERIC_ECAM_MAP */
+
static void __init pci_mmconfig_remove(struct pci_mmcfg_region *cfg)
{
if (cfg->res.parent)
diff --git a/include/linux/ecam.h b/include/linux/ecam.h
index dec3b52..813acd1 100644
--- a/include/linux/ecam.h
+++ b/include/linux/ecam.h
@@ -29,6 +29,12 @@ void list_add_sorted(struct pci_mmcfg_region *new);
void free_all_mmcfg(void);
int pci_mmconfig_delete(u16 seg, u8 start, u8 end);
+/* Arch specific calls */
+int pci_mmcfg_arch_init(void);
+void pci_mmcfg_arch_free(void);
+int pci_mmcfg_arch_map(struct pci_mmcfg_region *cfg);
+void pci_mmcfg_arch_unmap(struct pci_mmcfg_region *cfg);
+
extern struct list_head pci_mmcfg_list;
#define PCI_MMCFG_BUS_OFFSET(bus) ((bus) << 20)
--
1.9.1
next prev parent reply other threads:[~2016-02-04 17:29 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-04 17:28 [PATCH V4 00/23] MMCONFIG refactoring and support for ARM64 PCI hostbridge init based on ACPI Tomasz Nowicki
2016-02-04 17:28 ` [PATCH V4 01/23] x86, pci: Reorder logic of pci_mmconfig_insert() function Tomasz Nowicki
2016-02-04 17:28 ` [PATCH V4 02/23] x86, pci, acpi: Move arch-agnostic MMCONFIG (aka ECAM) and ACPI code out of arch/x86/ directory Tomasz Nowicki
2016-02-04 17:28 ` [PATCH V4 03/23] pci, acpi, mcfg: Provide generic implementation of MCFG code initialization Tomasz Nowicki
2016-02-04 17:28 ` [PATCH V4 04/23] x86, pci: mmconfig_{32,64}.c code refactoring - remove code duplication Tomasz Nowicki
2016-02-04 17:28 ` Tomasz Nowicki [this message]
2016-02-04 17:28 ` [PATCH V4 06/23] XEN / PCI: Remove the dependence on arch x86 when PCI_MMCONFIG=y Tomasz Nowicki
2016-02-04 17:28 ` [PATCH V4 07/23] pci, acpi, mcfg: Provide default RAW ACPI PCI config space accessors Tomasz Nowicki
2016-02-04 17:28 ` [PATCH V4 08/23] arm64, acpi: Use MCFG and empty PCI config space accessors from mcfg.c file Tomasz Nowicki
2016-02-04 17:28 ` [PATCH V4 09/23] pci, acpi, ecam: Add flag to indicate whether ECAM region was hot added or not Tomasz Nowicki
2016-02-04 17:28 ` [PATCH V4 10/23] x86, pci: Cleanup platform specific MCFG data by using ECAM hot_added flag Tomasz Nowicki
2016-02-04 17:28 ` [PATCH V4 11/23] pci, acpi: Move ACPI host bridge device companion assignment to core code Tomasz Nowicki
2016-02-09 18:02 ` Lorenzo Pieralisi
2016-02-10 21:09 ` Tomasz Nowicki
2016-02-04 17:28 ` [PATCH V4 12/23] x86, ia64, pci: Remove ACPI companion device from platform specific data Tomasz Nowicki
2016-02-09 17:28 ` Lorenzo Pieralisi
2016-02-10 21:21 ` Tomasz Nowicki
2016-02-04 17:28 ` [PATCH V4 13/23] pci, acpi: Provide generic way to assign bus domain number Tomasz Nowicki
2016-02-04 17:28 ` [PATCH V4 14/23] x86, ia64: Include acpi_pci_{add|remove}_bus to the default pcibios_{add|remove}_bus implementation Tomasz Nowicki
2016-02-04 17:28 ` [PATCH V4 15/23] acpi, mcfg: Implement two calls that might be used to inject/remove MCFG region Tomasz Nowicki
2016-02-10 14:06 ` Lorenzo Pieralisi
2016-02-12 8:56 ` Tomasz Nowicki
2016-02-04 17:28 ` [PATCH V4 16/23] x86, acpi, pci: Use equivalent function from mcfg.c driver Tomasz Nowicki
2016-02-04 17:28 ` [PATCH V4 17/23] acpi, mcfg: Add default PCI config accessors implementation and initial support for related quirks Tomasz Nowicki
2016-02-29 8:03 ` Jayachandran Chandrashekaran Nair
2016-03-02 10:42 ` Lorenzo Pieralisi
2016-02-04 17:28 ` [PATCH V4 18/23] pci, of: Move the PCI I/O space management to PCI core code Tomasz Nowicki
2016-02-04 17:28 ` [PATCH V4 19/23] drivers: pci: add generic code to claim bus resources Tomasz Nowicki
2016-02-04 17:28 ` [PATCH V4 20/23] pci, acpi: Support for ACPI based generic PCI host controller init Tomasz Nowicki
2016-02-04 17:28 ` [PATCH V4 21/23] pci, acpi: Match PCI config space accessors against platfrom specific quirks Tomasz Nowicki
2016-02-04 17:29 ` [PATCH V4 22/23] arm64, pci, acpi: Assign legacy IRQs once device is enable Tomasz Nowicki
2016-02-11 11:58 ` Lorenzo Pieralisi
2016-02-11 17:17 ` Lorenzo Pieralisi
2016-02-11 18:39 ` Tomasz Nowicki
2016-02-11 18:46 ` Tomasz Nowicki
2016-02-04 17:29 ` [PATCH V4 23/23] arm64, pci, acpi: Start using ACPI based PCI host bridge driver for ARM64 Tomasz Nowicki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1454606941-9523-6-git-send-email-tn@semihalf.com \
--to=tn@semihalf.com \
--cc=Liviu.Dudau@arm.com \
--cc=Lorenzo.Pieralisi@arm.com \
--cc=Stefano.Stabellini@eu.citrix.com \
--cc=Suravee.Suthikulpanit@amd.com \
--cc=arnd@arndb.de \
--cc=bhelgaas@google.com \
--cc=catalin.marinas@arm.com \
--cc=ddaney@caviumnetworks.com \
--cc=hanjun.guo@linaro.org \
--cc=jchandra@broadcom.com \
--cc=jcm@redhat.com \
--cc=jiang.liu@linux.intel.com \
--cc=linaro-acpi@lists.linaro.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=msalter@redhat.com \
--cc=mw@semihalf.com \
--cc=okaya@codeaurora.org \
--cc=rjw@rjwysocki.net \
--cc=robert.richter@caviumnetworks.com \
--cc=wangyijing@huawei.com \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®