mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Gregory CLEMENT <gregory.clement@free-electrons.com>
To: "David S. Miller" <davem@davemloft.net>,
	linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
	Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
	Gregory CLEMENT <gregory.clement@free-electrons.com>,
	linux-arm-kernel@lists.infradead.org,
	Lior Amsalem <alior@marvell.com>,
	Nadav Haklai <nadavh@marvell.com>,
	Marcin Wojtas <mw@semihalf.com>,
	Russell King - ARM Linux <linux@arm.linux.org.uk>,
	Willy Tarreau <w@1wt.eu>
Subject: [PATCH v3 net 5/7] net: mvneta: Modify the queue related fields from each cpu
Date: Thu,  4 Feb 2016 22:09:27 +0100	[thread overview]
Message-ID: <1454620169-8156-6-git-send-email-gregory.clement@free-electrons.com> (raw)
In-Reply-To: <1454620169-8156-1-git-send-email-gregory.clement@free-electrons.com>

In the MVNETA_INTR_* registers, the queues related fields are per cpu,
according to the datasheet (comment in [] are added by me):
"In a multi-CPU system, bits of RX[or TX] queues for which the access by
the reading[or writing] CPU is disabled are read as 0, and cannot be
cleared[or written]."

That means that each time we want to manipulate these bits we had to do
it on each cpu and not only on the current cpu.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
 drivers/net/ethernet/marvell/mvneta.c | 100 ++++++++++++++++------------------
 1 file changed, 46 insertions(+), 54 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 74f8158df2b0..2d0e8a605ca9 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -1038,6 +1038,43 @@ static void mvneta_set_autoneg(struct mvneta_port *pp, int enable)
 	}
 }
 
+static void mvneta_percpu_unmask_interrupt(void *arg)
+{
+	struct mvneta_port *pp = arg;
+
+	/* All the queue are unmasked, but actually only the ones
+	 * mapped to this CPU will be unmasked
+	 */
+	mvreg_write(pp, MVNETA_INTR_NEW_MASK,
+		    MVNETA_RX_INTR_MASK_ALL |
+		    MVNETA_TX_INTR_MASK_ALL |
+		    MVNETA_MISCINTR_INTR_MASK);
+}
+
+static void mvneta_percpu_mask_interrupt(void *arg)
+{
+	struct mvneta_port *pp = arg;
+
+	/* All the queue are masked, but actually only the ones
+	 * mapped to this CPU will be masked
+	 */
+	mvreg_write(pp, MVNETA_INTR_NEW_MASK, 0);
+	mvreg_write(pp, MVNETA_INTR_OLD_MASK, 0);
+	mvreg_write(pp, MVNETA_INTR_MISC_MASK, 0);
+}
+
+static void mvneta_percpu_clear_intr_cause(void *arg)
+{
+	struct mvneta_port *pp = arg;
+
+	/* All the queue are cleared, but actually only the ones
+	 * mapped to this CPU will be cleared
+	 */
+	mvreg_write(pp, MVNETA_INTR_NEW_CAUSE, 0);
+	mvreg_write(pp, MVNETA_INTR_MISC_CAUSE, 0);
+	mvreg_write(pp, MVNETA_INTR_OLD_CAUSE, 0);
+}
+
 /* This method sets defaults to the NETA port:
  *	Clears interrupt Cause and Mask registers.
  *	Clears all MAC tables.
@@ -1055,14 +1092,10 @@ static void mvneta_defaults_set(struct mvneta_port *pp)
 	int max_cpu = num_present_cpus();
 
 	/* Clear all Cause registers */
-	mvreg_write(pp, MVNETA_INTR_NEW_CAUSE, 0);
-	mvreg_write(pp, MVNETA_INTR_OLD_CAUSE, 0);
-	mvreg_write(pp, MVNETA_INTR_MISC_CAUSE, 0);
+	on_each_cpu(mvneta_percpu_clear_intr_cause, pp, true);
 
 	/* Mask all interrupts */
-	mvreg_write(pp, MVNETA_INTR_NEW_MASK, 0);
-	mvreg_write(pp, MVNETA_INTR_OLD_MASK, 0);
-	mvreg_write(pp, MVNETA_INTR_MISC_MASK, 0);
+	on_each_cpu(mvneta_percpu_mask_interrupt, pp, true);
 	mvreg_write(pp, MVNETA_INTR_ENABLE, 0);
 
 	/* Enable MBUS Retry bit16 */
@@ -2528,31 +2561,6 @@ static int mvneta_setup_txqs(struct mvneta_port *pp)
 	return 0;
 }
 
-static void mvneta_percpu_unmask_interrupt(void *arg)
-{
-	struct mvneta_port *pp = arg;
-
-	/* All the queue are unmasked, but actually only the ones
-	 * maped to this CPU will be unmasked
-	 */
-	mvreg_write(pp, MVNETA_INTR_NEW_MASK,
-		    MVNETA_RX_INTR_MASK_ALL |
-		    MVNETA_TX_INTR_MASK_ALL |
-		    MVNETA_MISCINTR_INTR_MASK);
-}
-
-static void mvneta_percpu_mask_interrupt(void *arg)
-{
-	struct mvneta_port *pp = arg;
-
-	/* All the queue are masked, but actually only the ones
-	 * maped to this CPU will be masked
-	 */
-	mvreg_write(pp, MVNETA_INTR_NEW_MASK, 0);
-	mvreg_write(pp, MVNETA_INTR_OLD_MASK, 0);
-	mvreg_write(pp, MVNETA_INTR_MISC_MASK, 0);
-}
-
 static void mvneta_start_dev(struct mvneta_port *pp)
 {
 	int cpu;
@@ -2603,13 +2611,10 @@ static void mvneta_stop_dev(struct mvneta_port *pp)
 	mvneta_port_disable(pp);
 
 	/* Clear all ethernet port interrupts */
-	mvreg_write(pp, MVNETA_INTR_MISC_CAUSE, 0);
-	mvreg_write(pp, MVNETA_INTR_OLD_CAUSE, 0);
+	on_each_cpu(mvneta_percpu_clear_intr_cause, pp, true);
 
 	/* Mask all ethernet port interrupts */
-	mvreg_write(pp, MVNETA_INTR_NEW_MASK, 0);
-	mvreg_write(pp, MVNETA_INTR_OLD_MASK, 0);
-	mvreg_write(pp, MVNETA_INTR_MISC_MASK, 0);
+	on_each_cpu(mvneta_percpu_mask_interrupt, pp, true);
 
 	mvneta_tx_reset(pp);
 	mvneta_rx_reset(pp);
@@ -2921,9 +2926,7 @@ static int mvneta_percpu_notifier(struct notifier_block *nfb,
 		}
 
 		/* Mask all ethernet port interrupts */
-		mvreg_write(pp, MVNETA_INTR_NEW_MASK, 0);
-		mvreg_write(pp, MVNETA_INTR_OLD_MASK, 0);
-		mvreg_write(pp, MVNETA_INTR_MISC_MASK, 0);
+		on_each_cpu(mvneta_percpu_mask_interrupt, pp, true);
 		napi_enable(&port->napi);
 
 
@@ -2938,14 +2941,8 @@ static int mvneta_percpu_notifier(struct notifier_block *nfb,
 		 */
 		mvneta_percpu_elect(pp);
 
-		/* Unmask all ethernet port interrupts, as this
-		 * notifier is called for each CPU then the CPU to
-		 * Queue mapping is applied
-		 */
-		mvreg_write(pp, MVNETA_INTR_NEW_MASK,
-			MVNETA_RX_INTR_MASK(rxq_number) |
-			MVNETA_TX_INTR_MASK(txq_number) |
-			MVNETA_MISCINTR_INTR_MASK);
+		/* Unmask all ethernet port interrupts */
+		on_each_cpu(mvneta_percpu_unmask_interrupt, pp, true);
 		mvreg_write(pp, MVNETA_INTR_MISC_MASK,
 			MVNETA_CAUSE_PHY_STATUS_CHANGE |
 			MVNETA_CAUSE_LINK_CHANGE |
@@ -2956,9 +2953,7 @@ static int mvneta_percpu_notifier(struct notifier_block *nfb,
 	case CPU_DOWN_PREPARE_FROZEN:
 		netif_tx_stop_all_queues(pp->dev);
 		/* Mask all ethernet port interrupts */
-		mvreg_write(pp, MVNETA_INTR_NEW_MASK, 0);
-		mvreg_write(pp, MVNETA_INTR_OLD_MASK, 0);
-		mvreg_write(pp, MVNETA_INTR_MISC_MASK, 0);
+		on_each_cpu(mvneta_percpu_mask_interrupt, pp, true);
 
 		napi_synchronize(&port->napi);
 		napi_disable(&port->napi);
@@ -2974,10 +2969,7 @@ static int mvneta_percpu_notifier(struct notifier_block *nfb,
 		/* Check if a new CPU must be elected now this on is down */
 		mvneta_percpu_elect(pp);
 		/* Unmask all ethernet port interrupts */
-		mvreg_write(pp, MVNETA_INTR_NEW_MASK,
-			MVNETA_RX_INTR_MASK(rxq_number) |
-			MVNETA_TX_INTR_MASK(txq_number) |
-			MVNETA_MISCINTR_INTR_MASK);
+		on_each_cpu(mvneta_percpu_unmask_interrupt, pp, true);
 		mvreg_write(pp, MVNETA_INTR_MISC_MASK,
 			MVNETA_CAUSE_PHY_STATUS_CHANGE |
 			MVNETA_CAUSE_LINK_CHANGE |
-- 
2.5.0

  parent reply	other threads:[~2016-02-04 21:10 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-04 21:09 [PATCH v3 net 0/7] mvneta fixes for SMP Gregory CLEMENT
2016-02-04 21:09 ` [PATCH v3 net 1/7] net: mvneta: Fix for_each_present_cpu usage Gregory CLEMENT
2016-02-04 21:09 ` [PATCH v3 net 2/7] net: mvneta: Fix the CPU choice in mvneta_percpu_elect Gregory CLEMENT
2016-02-04 21:09 ` [PATCH v3 net 3/7] net: mvneta: Use on_each_cpu when possible Gregory CLEMENT
2016-02-04 21:09 ` [PATCH v3 net 4/7] net: mvneta: Remove unused code Gregory CLEMENT
2016-02-04 21:09 ` Gregory CLEMENT [this message]
2016-02-04 21:09 ` [PATCH v3 net 6/7] net: mvneta: The mvneta_percpu_elect function should be atomic Gregory CLEMENT
2016-02-04 21:09 ` [PATCH v3 net 7/7] net: mvneta: Fix race condition during stopping Gregory CLEMENT
2016-02-13 11:03 ` [PATCH v3 net 0/7] mvneta fixes for SMP David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1454620169-8156-6-git-send-email-gregory.clement@free-electrons.com \
    --to=gregory.clement@free-electrons.com \
    --cc=alior@marvell.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=jason@lakedaemon.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=mw@semihalf.com \
    --cc=nadavh@marvell.com \
    --cc=netdev@vger.kernel.org \
    --cc=sebastian.hesselbarth@gmail.com \
    --cc=thomas.petazzoni@free-electrons.com \
    --cc=w@1wt.eu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®