Re: [PATCH v2 1/2] ARM: bcm2835: dt: Add the ethernet to the device trees

[Lubomir Rintel <lkundrak@v3.sk>]

Hi Olivier,

On Fri, 2016-02-05 at 15:25 +0100, Olivier Blin wrote:
> Lubomir Rintel <lkundrak@v3.sk> writes:
> 
> > diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
> > b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
> [...]
> > @@ -33,3 +37,17 @@
> >  		brcm,function = <BCM2835_FSEL_ALT0>;
> >  	};
> >  };
> > +
> > +&usb {
> > +	usb1@1 {
> > +		compatible = "usb0424,9514";
> > +		reg = <01>;
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> > +
> > +		ethernet: usbether@1 {
> > +			compatible = "usb0424,ec00";
> > +			reg = <01>;
> > +		};
> > +	};
> > +};
> 
> Hi,
> 
> This works for me, after making sure that your u-boot patch gets a
> chance to be run (unset usbethaddr from u-boot).

Thanks for that.

> Though, I am not really DT-literate, but shouldn't the ethernet block
> use the PID from the ethernet device?
> The usbether device is 9514 on RPi2, while ec00 is the hub.

Are you sure? I didn't check on RPi2, but I check the Models B and B+
and the ethernet device was 0xec00 on both. The driver attaches to that
product ID:

[lkundrak@odvarok linux]$ modinfo smsc95xx |grep EC
alias:          usb:v0424pEC00d*dc*dsc*dp*ic*isc*ip*in*
[lkundrak@odvarok linux]$ modinfo smsc95xx |grep 9514
[lkundrak@odvarok linux]$

> Your patch works, but this works as well after swapping the PIDs.
> 
> Thanks

Take care
Lubo