mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Robert Jarzmik <robert.jarzmik@free.fr>
To: Ulf Hansson <ulf.hansson@linaro.org>
Cc: linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org,
	Robert Jarzmik <robert.jarzmik@free.fr>
Subject: [PATCH v2] mmc: pxamci: fix the device-tree probe deferral path
Date: Sat,  6 Feb 2016 22:14:54 +0100	[thread overview]
Message-ID: <1454793294-7256-1-git-send-email-robert.jarzmik@free.fr> (raw)

When the gpio driver is probed after the mmc one, the read/write gpio
and card detection one return -EPROBE_DEFER. Unfortunately, the memory
region remains requested, and upon the next probe, the probe will fail
anyway with -EBUSY.

Fix this by releasing the memory resource upon probe failure.

More broadly, this patch uses devm_*() primitives whenever possible in
the probe function.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
---
Since v1: broaden the devm_*() enveloppe
---
 drivers/mmc/host/pxamci.c | 24 +++++++-----------------
 1 file changed, 7 insertions(+), 17 deletions(-)

diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 28a057fae0a1..a672b9259d34 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -654,12 +654,8 @@ static int pxamci_probe(struct platform_device *pdev)
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	irq = platform_get_irq(pdev, 0);
-	if (!r || irq < 0)
-		return -ENXIO;
-
-	r = request_mem_region(r->start, SZ_4K, DRIVER_NAME);
-	if (!r)
-		return -EBUSY;
+	if (irq < 0)
+		return irq;
 
 	mmc = mmc_alloc_host(sizeof(struct pxamci_host), &pdev->dev);
 	if (!mmc) {
@@ -727,9 +723,9 @@ static int pxamci_probe(struct platform_device *pdev)
 	host->irq = irq;
 	host->imask = MMC_I_MASK_ALL;
 
-	host->base = ioremap(r->start, SZ_4K);
-	if (!host->base) {
-		ret = -ENOMEM;
+	host->base = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(host->base)) {
+		ret = PTR_ERR(host->base);
 		goto out;
 	}
 
@@ -742,7 +738,8 @@ static int pxamci_probe(struct platform_device *pdev)
 	writel(64, host->base + MMC_RESTO);
 	writel(host->imask, host->base + MMC_I_MASK);
 
-	ret = request_irq(host->irq, pxamci_irq, 0, DRIVER_NAME, host);
+	ret = devm_request_irq(&pdev->dev, host->irq, pxamci_irq, 0,
+			       DRIVER_NAME, host);
 	if (ret)
 		goto out;
 
@@ -833,14 +830,11 @@ out:
 			dma_release_channel(host->dma_chan_rx);
 		if (host->dma_chan_tx)
 			dma_release_channel(host->dma_chan_tx);
-		if (host->base)
-			iounmap(host->base);
 		if (host->clk)
 			clk_put(host->clk);
 	}
 	if (mmc)
 		mmc_free_host(mmc);
-	release_resource(r);
 	return ret;
 }
 
@@ -870,17 +864,13 @@ static int pxamci_remove(struct platform_device *pdev)
 		       END_CMD_RES|PRG_DONE|DATA_TRAN_DONE,
 		       host->base + MMC_I_MASK);
 
-		free_irq(host->irq, host);
 		dmaengine_terminate_all(host->dma_chan_rx);
 		dmaengine_terminate_all(host->dma_chan_tx);
 		dma_release_channel(host->dma_chan_rx);
 		dma_release_channel(host->dma_chan_tx);
-		iounmap(host->base);
 
 		clk_put(host->clk);
 
-		release_resource(host->res);
-
 		mmc_free_host(mmc);
 	}
 	return 0;
-- 
2.1.4

             reply	other threads:[~2016-02-06 21:15 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-06 21:14 Robert Jarzmik [this message]
2016-02-08  9:19 ` Ulf Hansson
2016-02-08 14:16   ` Robert Jarzmik

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1454793294-7256-1-git-send-email-robert.jarzmik@free.fr \
    --to=robert.jarzmik@free.fr \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®