From: Arnd Bergmann <arnd@arndb.de>
To: "David S. Miller" <davem@davemloft.net>,
Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org,
Arnd Bergmann <arnd@arndb.de>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] net: am79c961a: avoid %? in inline assembly
Date: Mon, 8 Feb 2016 15:33:42 +0100 [thread overview]
Message-ID: <1454942025-2779812-1-git-send-email-arnd@arndb.de> (raw)
The am79c961a.c driver fails to build with clang because of an
unusual inline assembly construct:
drivers/net/ethernet/amd/am79c961a.c:53:7: error: invalid % escape in inline assembly string
"str%?h %1, [%2] @ NET_RAP\n\t"
The same change has been done a decade ago in arch/arm as of
6a39dd6222dd ("[ARM] 3759/2: Remove uses of %?"), but apparently
some drivers were missed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/net/ethernet/amd/am79c961a.c | 64 ++++++++++++++++++------------------
1 file changed, 32 insertions(+), 32 deletions(-)
diff --git a/drivers/net/ethernet/amd/am79c961a.c b/drivers/net/ethernet/amd/am79c961a.c
index 87e727b921dc..fcdf5dda448f 100644
--- a/drivers/net/ethernet/amd/am79c961a.c
+++ b/drivers/net/ethernet/amd/am79c961a.c
@@ -50,8 +50,8 @@ static const char version[] =
static void write_rreg(u_long base, u_int reg, u_int val)
{
asm volatile(
- "str%?h %1, [%2] @ NET_RAP\n\t"
- "str%?h %0, [%2, #-4] @ NET_RDP"
+ "strh %1, [%2] @ NET_RAP\n\t"
+ "strh %0, [%2, #-4] @ NET_RDP"
:
: "r" (val), "r" (reg), "r" (ISAIO_BASE + 0x0464));
}
@@ -60,8 +60,8 @@ static inline unsigned short read_rreg(u_long base_addr, u_int reg)
{
unsigned short v;
asm volatile(
- "str%?h %1, [%2] @ NET_RAP\n\t"
- "ldr%?h %0, [%2, #-4] @ NET_RDP"
+ "strh %1, [%2] @ NET_RAP\n\t"
+ "ldrh %0, [%2, #-4] @ NET_RDP"
: "=r" (v)
: "r" (reg), "r" (ISAIO_BASE + 0x0464));
return v;
@@ -70,8 +70,8 @@ static inline unsigned short read_rreg(u_long base_addr, u_int reg)
static inline void write_ireg(u_long base, u_int reg, u_int val)
{
asm volatile(
- "str%?h %1, [%2] @ NET_RAP\n\t"
- "str%?h %0, [%2, #8] @ NET_IDP"
+ "strh %1, [%2] @ NET_RAP\n\t"
+ "strh %0, [%2, #8] @ NET_IDP"
:
: "r" (val), "r" (reg), "r" (ISAIO_BASE + 0x0464));
}
@@ -80,8 +80,8 @@ static inline unsigned short read_ireg(u_long base_addr, u_int reg)
{
u_short v;
asm volatile(
- "str%?h %1, [%2] @ NAT_RAP\n\t"
- "ldr%?h %0, [%2, #8] @ NET_IDP\n\t"
+ "strh %1, [%2] @ NAT_RAP\n\t"
+ "ldrh %0, [%2, #8] @ NET_IDP\n\t"
: "=r" (v)
: "r" (reg), "r" (ISAIO_BASE + 0x0464));
return v;
@@ -96,7 +96,7 @@ am_writebuffer(struct net_device *dev, u_int offset, unsigned char *buf, unsigne
offset = ISAMEM_BASE + (offset << 1);
length = (length + 1) & ~1;
if ((int)buf & 2) {
- asm volatile("str%?h %2, [%0], #4"
+ asm volatile("strh %2, [%0], #4"
: "=&r" (offset) : "0" (offset), "r" (buf[0] | (buf[1] << 8)));
buf += 2;
length -= 2;
@@ -104,20 +104,20 @@ am_writebuffer(struct net_device *dev, u_int offset, unsigned char *buf, unsigne
while (length > 8) {
register unsigned int tmp asm("r2"), tmp2 asm("r3");
asm volatile(
- "ldm%?ia %0!, {%1, %2}"
+ "ldmia %0!, {%1, %2}"
: "+r" (buf), "=&r" (tmp), "=&r" (tmp2));
length -= 8;
asm volatile(
- "str%?h %1, [%0], #4\n\t"
- "mov%? %1, %1, lsr #16\n\t"
- "str%?h %1, [%0], #4\n\t"
- "str%?h %2, [%0], #4\n\t"
- "mov%? %2, %2, lsr #16\n\t"
- "str%?h %2, [%0], #4"
+ "strh %1, [%0], #4\n\t"
+ "mov %1, %1, lsr #16\n\t"
+ "strh %1, [%0], #4\n\t"
+ "strh %2, [%0], #4\n\t"
+ "mov %2, %2, lsr #16\n\t"
+ "strh %2, [%0], #4"
: "+r" (offset), "=&r" (tmp), "=&r" (tmp2));
}
while (length > 0) {
- asm volatile("str%?h %2, [%0], #4"
+ asm volatile("strh %2, [%0], #4"
: "=&r" (offset) : "0" (offset), "r" (buf[0] | (buf[1] << 8)));
buf += 2;
length -= 2;
@@ -132,23 +132,23 @@ am_readbuffer(struct net_device *dev, u_int offset, unsigned char *buf, unsigned
if ((int)buf & 2) {
unsigned int tmp;
asm volatile(
- "ldr%?h %2, [%0], #4\n\t"
- "str%?b %2, [%1], #1\n\t"
- "mov%? %2, %2, lsr #8\n\t"
- "str%?b %2, [%1], #1"
+ "ldrh %2, [%0], #4\n\t"
+ "strb %2, [%1], #1\n\t"
+ "mov %2, %2, lsr #8\n\t"
+ "strb %2, [%1], #1"
: "=&r" (offset), "=&r" (buf), "=r" (tmp): "0" (offset), "1" (buf));
length -= 2;
}
while (length > 8) {
register unsigned int tmp asm("r2"), tmp2 asm("r3"), tmp3;
asm volatile(
- "ldr%?h %2, [%0], #4\n\t"
- "ldr%?h %4, [%0], #4\n\t"
- "ldr%?h %3, [%0], #4\n\t"
- "orr%? %2, %2, %4, lsl #16\n\t"
- "ldr%?h %4, [%0], #4\n\t"
- "orr%? %3, %3, %4, lsl #16\n\t"
- "stm%?ia %1!, {%2, %3}"
+ "ldrh %2, [%0], #4\n\t"
+ "ldrh %4, [%0], #4\n\t"
+ "ldrh %3, [%0], #4\n\t"
+ "orr %2, %2, %4, lsl #16\n\t"
+ "ldrh %4, [%0], #4\n\t"
+ "orr %3, %3, %4, lsl #16\n\t"
+ "stmia %1!, {%2, %3}"
: "=&r" (offset), "=&r" (buf), "=r" (tmp), "=r" (tmp2), "=r" (tmp3)
: "0" (offset), "1" (buf));
length -= 8;
@@ -156,10 +156,10 @@ am_readbuffer(struct net_device *dev, u_int offset, unsigned char *buf, unsigned
while (length > 0) {
unsigned int tmp;
asm volatile(
- "ldr%?h %2, [%0], #4\n\t"
- "str%?b %2, [%1], #1\n\t"
- "mov%? %2, %2, lsr #8\n\t"
- "str%?b %2, [%1], #1"
+ "ldrh %2, [%0], #4\n\t"
+ "strb %2, [%1], #1\n\t"
+ "mov %2, %2, lsr #8\n\t"
+ "strb %2, [%1], #1"
: "=&r" (offset), "=&r" (buf), "=r" (tmp) : "0" (offset), "1" (buf));
length -= 2;
}
--
2.7.0
next reply other threads:[~2016-02-08 14:34 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-08 14:33 Arnd Bergmann [this message]
2016-02-08 15:45 ` Russell King - ARM Linux
2016-02-16 20:10 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1454942025-2779812-1-git-send-email-arnd@arndb.de \
--to=arnd@arndb.de \
--cc=davem@davemloft.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®