From: Joshua Henderson <joshua.henderson@microchip.com>
To: <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: Joshua Henderson <joshua.henderson@microchip.com>,
Purna Chandra Mandal <purna.mandal@microchip.com>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>, Matt Mackall <mpm@selenic.com>,
Herbert Xu <herbert@gondor.apana.org.au>,
Kieran Bingham <kieranbingham@gmail.com>,
Lee Jones <lee.jones@linaro.org>, Pankaj Dev <pankaj.dev@st.com>,
Scott Branden <sbranden@broadcom.com>,
Daniel Thompson <daniel.thompson@linaro.org>,
Ray Jui <rjui@broadcom.com>, <linux-crypto@vger.kernel.org>
Subject: [PATCH v2 2/2] rng: pic32-rng: Add PIC32 RNG hardware driver
Date: Mon, 8 Feb 2016 14:17:53 -0700 [thread overview]
Message-ID: <1454966283-14965-2-git-send-email-joshua.henderson@microchip.com> (raw)
In-Reply-To: <1454966283-14965-1-git-send-email-joshua.henderson@microchip.com>
Add support for the hardware true random number generator
peripheral found on PIC32.
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
---
Changes since v1:
- Reorder includes to be alphabetic.
- Drop use of PRNG and only use TRNG.
- Fix dangling clock ref in error condition.
- Remove unecessary error handling and fix other cases.
---
drivers/char/hw_random/Kconfig | 13 +++
drivers/char/hw_random/Makefile | 1 +
drivers/char/hw_random/pic32-rng.c | 155 ++++++++++++++++++++++++++++++++++++
3 files changed, 169 insertions(+)
create mode 100644 drivers/char/hw_random/pic32-rng.c
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index dbf2271..3ab0c46 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -381,6 +381,19 @@ config HW_RANDOM_STM32
If unsure, say N.
+config HW_RANDOM_PIC32
+ tristate "Microchip PIC32 Random Number Generator support"
+ depends on HW_RANDOM && MACH_PIC32
+ default y
+ ---help---
+ This driver provides kernel-side support for the Random Number
+ Generator hardware found on a PIC32.
+
+ To compile this driver as a module, choose M here. the
+ module will be called pic32-rng.
+
+ If unsure, say Y.
+
endif # HW_RANDOM
config UML_RANDOM
diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
index 5ad3976..f5a6fa7 100644
--- a/drivers/char/hw_random/Makefile
+++ b/drivers/char/hw_random/Makefile
@@ -33,3 +33,4 @@ obj-$(CONFIG_HW_RANDOM_MSM) += msm-rng.o
obj-$(CONFIG_HW_RANDOM_ST) += st-rng.o
obj-$(CONFIG_HW_RANDOM_XGENE) += xgene-rng.o
obj-$(CONFIG_HW_RANDOM_STM32) += stm32-rng.o
+obj-$(CONFIG_HW_RANDOM_PIC32) += pic32-rng.o
diff --git a/drivers/char/hw_random/pic32-rng.c b/drivers/char/hw_random/pic32-rng.c
new file mode 100644
index 0000000..108897b
--- /dev/null
+++ b/drivers/char/hw_random/pic32-rng.c
@@ -0,0 +1,155 @@
+/*
+ * PIC32 RNG driver
+ *
+ * Joshua Henderson <joshua.henderson@microchip.com>
+ * Copyright (C) 2016 Microchip Technology Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/hw_random.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#define RNGCON 0x04
+#define TRNGEN BIT(8)
+#define PRNGEN BIT(9)
+#define PRNGCONT BIT(10)
+#define TRNGMOD BIT(11)
+#define SEEDLOAD BIT(12)
+#define RNGPOLY1 0x08
+#define RNGPOLY2 0x0C
+#define RNGNUMGEN1 0x10
+#define RNGNUMGEN2 0x14
+#define RNGSEED1 0x18
+#define RNGSEED2 0x1C
+#define RNGRCNT 0x20
+#define RCNT_MASK 0x7F
+
+struct pic32_rng {
+ void __iomem *base;
+ struct hwrng rng;
+ struct clk *clk;
+};
+
+/*
+ * The TRNG can generate up to 24Mbps. This is a timeout that should be safe
+ * enough given the instructions in the loop and that the TRNG may not always
+ * be at maximum rate.
+ */
+#define RNG_TIMEOUT 500
+
+static int pic32_rng_read(struct hwrng *rng, void *buf, size_t max,
+ bool wait)
+{
+ struct pic32_rng *priv = container_of(rng, struct pic32_rng, rng);
+ u64 *data = buf;
+ u32 t;
+ unsigned int timeout = RNG_TIMEOUT;
+
+ if (max < 8)
+ return 0;
+
+ do {
+ t = readl(priv->base + RNGRCNT) & RCNT_MASK;
+ if (t == 64) {
+ /* TRNG value comes through the seed registers */
+ *data = ((u64)readl(priv->base + RNGSEED2) << 32) +
+ readl(priv->base + RNGSEED1);
+ return 8;
+ }
+ } while (wait && --timeout);
+
+ return -EIO;
+}
+
+static int pic32_rng_probe(struct platform_device *pdev)
+{
+ struct pic32_rng *priv;
+ struct resource *res;
+ u32 v;
+ int ret;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ priv->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(priv->base))
+ return PTR_ERR(priv->base);
+
+ priv->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(priv->clk))
+ return PTR_ERR(priv->clk);
+
+ ret = clk_prepare_enable(priv->clk);
+ if (ret)
+ return ret;
+
+ /* enable TRNG in enhanced mode */
+ v = TRNGEN | TRNGMOD;
+ writel(v, priv->base + RNGCON);
+
+ priv->rng.name = pdev->name;
+ priv->rng.read = pic32_rng_read;
+
+ ret = hwrng_register(&priv->rng);
+ if (ret)
+ goto err_register;
+
+ platform_set_drvdata(pdev, priv);
+
+ return 0;
+
+err_register:
+ clk_disable_unprepare(priv->clk);
+ return ret;
+}
+
+static int pic32_rng_remove(struct platform_device *pdev)
+{
+ struct pic32_rng *rng = platform_get_drvdata(pdev);
+
+ hwrng_unregister(&rng->rng);
+ writel(0, rng->base + RNGCON);
+ clk_disable_unprepare(rng->clk);
+ return 0;
+}
+
+static const struct of_device_id pic32_rng_of_match[] = {
+ { .compatible = "microchip,pic32mzda-rng", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, pic32_rng_of_match);
+
+static struct platform_driver pic32_rng_driver = {
+ .probe = pic32_rng_probe,
+ .remove = pic32_rng_remove,
+ .driver = {
+ .name = "pic32-rng",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(pic32_rng_of_match),
+ },
+};
+
+module_platform_driver(pic32_rng_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Joshua Henderson <joshua.henderson@microchip.com>");
+MODULE_DESCRIPTION("Microchip PIC32 RNG Driver");
--
1.7.9.5
next prev parent reply other threads:[~2016-02-08 21:18 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-08 21:17 [PATCH v2 1/2] dt/bindings: Add bindings for the PIC32 random number generator Joshua Henderson
2016-02-08 21:17 ` Joshua Henderson [this message]
2016-02-08 21:34 ` [PATCH v2 2/2] rng: pic32-rng: Add PIC32 RNG hardware driver Daniel Thompson
2016-02-16 20:21 ` [PATCH v2 1/2] dt/bindings: Add bindings for the PIC32 random number generator Herbert Xu
2016-02-19 17:23 ` Joshua Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1454966283-14965-2-git-send-email-joshua.henderson@microchip.com \
--to=joshua.henderson@microchip.com \
--cc=daniel.thompson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=herbert@gondor.apana.org.au \
--cc=ijc+devicetree@hellion.org.uk \
--cc=kieranbingham@gmail.com \
--cc=lee.jones@linaro.org \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mpm@selenic.com \
--cc=pankaj.dev@st.com \
--cc=pawel.moll@arm.com \
--cc=purna.mandal@microchip.com \
--cc=rjui@broadcom.com \
--cc=robh+dt@kernel.org \
--cc=sbranden@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®