From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756331AbcBIO7n (ORCPT ); Tue, 9 Feb 2016 09:59:43 -0500 Received: from mail-wm0-f51.google.com ([74.125.82.51]:38526 "EHLO mail-wm0-f51.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754170AbcBIO7k (ORCPT ); Tue, 9 Feb 2016 09:59:40 -0500 From: Krzysztof Adamski X-Google-Original-From: Krzysztof Adamski To: Linus Walleij , Maxime Ripard , Chen-Yu Tsai , Hans de Goede , Lee Jones , Rob Herring , Jens Kuske , Fabian Frederick , Vishnu Patekar , linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com Cc: Krzysztof Adamski Subject: [PATCH v4 0/5] pinctrl: sunxi: Add H3 R_PIO controller support Date: Tue, 9 Feb 2016 15:58:44 +0100 Message-Id: <1455029929-18547-1-git-send-email-k@japko.eu> X-Mailer: git-send-email 2.1.4 X-DomainID: tieto.com Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This patch series is extension of my original single patch with the same subject. It adds support for R_PIO so that GPIO port L can be used in H3 based devices. It was tested on OrangePi PC where PL is connected amount others to an onboard led, a switch, an IR receiver and some VCC controllers. Patchset is based on next-20160209. --- Changes since v3: - collect some acked-bys - fix r_pios #interrupt-cells Changes since v2: - fixed apb0 parrent clocks list - moved binding documentation change to the proper patch - simplified sunxi_pinctrl_gpio_get according to ChenYu suggestions - fixed ordering in sunxi binding documentation Changes since v1: - splited patch to two separate - dtsi and c files - added APB0 clocks a parent for R_PIO - added fix in sunxi_pinctrl_gpio_get for getting pin value when in irq mode and on 2nd pinctrl - fixed a "pwn" > "pwm" typo - fixed order in allwinner,sunxi-pinctrl.txt Krzysztof Adamski (5): clk: sunxi: Add apb0 gates for H3 dts: sun8i-h3: Add APB0 related clocks and resets pinctrl: sunxi: Add H3 R_PIO controller support ARM: dts: sun8i-h3: Add R_PIO controller node to the dtsi pinctrl: sunxi: Use pin number when calling sunxi_pmx_set Documentation/devicetree/bindings/clock/sunxi.txt | 1 + .../bindings/pinctrl/allwinner,sunxi-pinctrl.txt | 1 + arch/arm/boot/dts/sun8i-h3.dtsi | 36 +++++++ drivers/clk/sunxi/clk-simple-gates.c | 2 + drivers/pinctrl/sunxi/Kconfig | 4 + drivers/pinctrl/sunxi/Makefile | 1 + drivers/pinctrl/sunxi/pinctrl-sun8i-h3-r.c | 106 +++++++++++++++++++++ drivers/pinctrl/sunxi/pinctrl-sunxi.c | 5 +- 8 files changed, 154 insertions(+), 2 deletions(-) create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun8i-h3-r.c -- 2.1.4