From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751660AbcBKRNh (ORCPT ); Thu, 11 Feb 2016 12:13:37 -0500 Received: from foss.arm.com ([217.140.101.70]:56455 "EHLO foss.arm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751466AbcBKRNf (ORCPT ); Thu, 11 Feb 2016 12:13:35 -0500 From: Sudeep Holla To: Lee Jones , Jassi Brar Cc: Sudeep Holla , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH 0/4] mailbox: mailbox-test: support single channel with separate Tx and Rx buffer Date: Thu, 11 Feb 2016 17:13:24 +0000 Message-Id: <1455210808-29395-1-git-send-email-sudeep.holla@arm.com> X-Mailer: git-send-email 1.9.1 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Lee, Jassi, Assuming mailbox-test was designed to be generic, I am trying to extend it to support single channel with separate Tx and Rx buffer. With these changes I am able to test arm_mhu driver. However I couldn't understand the intention of converting buffer to ASCII hex dump in read method. I have a local change to remove that so that it can deal with any data in any format(e.g. some protocol format) and userspace can deal with the actual interpretation of the data. Let me know your thoughts on that. Regards, Sudeep Sudeep Holla (4): mailbox: mailbox-test: rename driver as generic test driver mailbox: mailbox-test: fix the compatible string mailbox: mailbox-test: use print_hex_dump_bytes to allow dynamic printk mailbox: mailbox-test: add support for separate tx/rx buffer with single channel .../devicetree/bindings/mailbox/sti-mailbox.txt | 2 +- drivers/mailbox/mailbox-test.c | 50 ++++++++++++---------- 2 files changed, 29 insertions(+), 23 deletions(-) -- 1.9.1