mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Noam Camus <noamc@ezchip.com>
To: <linux-kernel@vger.kernel.org>
Cc: <linux-snps-arc@lists.infradead.org>, <daniel.lezcano@linaro.org>,
	<marc.zyngier@arm.com>, <cmetcalf@ezchip.com>, <talz@ezchip.com>,
	<giladb@ezchip.com>, Noam Camus <noamc@ezchip.com>,
	Rob Herring <robh+dt@kernel.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	John Stultz <john.stultz@linaro.org>
Subject: [PATCH v5 2/3] clocksource: Add NPS400 timers driver
Date: Thu, 11 Feb 2016 20:40:58 +0200	[thread overview]
Message-ID: <1455216059-29632-3-git-send-email-noamc@ezchip.com> (raw)
In-Reply-To: <1455159741-21722-1-git-send-email-noamc@ezchip.com>

From: Noam Camus <noamc@ezchip.com>

Add internal tick generator which is shared by all cores.
Each cluster of cores view it through dedicated address.
This is used for SMP system where all CPUs synced by same
clock source.

Signed-off-by: Noam Camus <noamc@ezchip.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
---
 .../bindings/timer/ezchip,nps400-timer.txt         |   15 ++++
 drivers/clocksource/Kconfig                        |   10 +++
 drivers/clocksource/Makefile                       |    1 +
 drivers/clocksource/timer-nps.c                    |   82 ++++++++++++++++++++
 4 files changed, 108 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/timer/ezchip,nps400-timer.txt
 create mode 100644 drivers/clocksource/timer-nps.c

diff --git a/Documentation/devicetree/bindings/timer/ezchip,nps400-timer.txt b/Documentation/devicetree/bindings/timer/ezchip,nps400-timer.txt
new file mode 100644
index 0000000..c8c03d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/ezchip,nps400-timer.txt
@@ -0,0 +1,15 @@
+NPS Network Processor
+
+Required properties:
+
+- compatible :	should be "ezchip,nps400-timer"
+
+Clocks required for compatible = "ezchip,nps400-timer":
+- clocks : Must contain a single entry describing the clock input
+
+Example:
+
+timer {
+	compatible = "ezchip,nps400-timer";
+	clocks = <&sysclk>;
+};
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 2eb5f0e..fa7be50 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -132,6 +132,16 @@ config CLKSRC_TI_32K
 	  This option enables support for Texas Instruments 32.768 Hz clocksource
 	  available on many OMAP-like platforms.
 
+config CLKSRC_NPS
+	bool "NPS400 clocksource driver" if COMPILE_TEST
+	depends on !PHYS_ADDR_T_64BIT
+	select CLKSRC_MMIO
+	select CLKSRC_OF if OF
+	help
+	  NPS400 clocksource support.
+	  Got 64 bit counter with update rate up to 1000MHz.
+	  This counter is accessed via couple of 32 bit memory mapped registers.
+
 config CLKSRC_STM32
 	bool "Clocksource for STM32 SoCs" if !ARCH_STM32
 	depends on OF && ARM && (ARCH_STM32 || COMPILE_TEST)
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 56bd16e..056cffd 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -46,6 +46,7 @@ obj-$(CONFIG_CLKSRC_QCOM)	+= qcom-timer.o
 obj-$(CONFIG_MTK_TIMER)		+= mtk_timer.o
 obj-$(CONFIG_CLKSRC_PISTACHIO)	+= time-pistachio.o
 obj-$(CONFIG_CLKSRC_TI_32K)	+= timer-ti-32k.o
+obj-$(CONFIG_CLKSRC_NPS)	+= timer-nps.o
 
 obj-$(CONFIG_ARM_ARCH_TIMER)		+= arm_arch_timer.o
 obj-$(CONFIG_ARM_GLOBAL_TIMER)		+= arm_global_timer.o
diff --git a/drivers/clocksource/timer-nps.c b/drivers/clocksource/timer-nps.c
new file mode 100644
index 0000000..a89aecb
--- /dev/null
+++ b/drivers/clocksource/timer-nps.c
@@ -0,0 +1,82 @@
+/*
+ * Copyright(c) 2015 EZchip Technologies.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ */
+
+#include <linux/interrupt.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/cpu.h>
+#include <soc/nps/common.h>
+
+#define NPS_MSU_TICK_LOW	0xC8
+#define NPS_CLUSTER_OFFSET	8
+#define NPS_CLUSTER_NUM		16
+
+/* This array is per cluster of CPUs (Each NPS400 cluster got 256 CPUs) */
+static void *nps_msu_reg_low_addr[NPS_CLUSTER_NUM] __read_mostly;
+
+static unsigned long nps_timer_rate;
+
+static cycle_t nps_clksrc_read(struct clocksource *clksrc)
+{
+	int cluster = raw_smp_processor_id() >> NPS_CLUSTER_OFFSET;
+
+	return (cycle_t)ioread32be(nps_msu_reg_low_addr[cluster]);
+}
+
+static void __init nps_setup_clocksource(struct device_node *node,
+					 struct clk *clk)
+{
+	int ret, cluster;
+
+	for (cluster = 0; cluster < NPS_CLUSTER_NUM; cluster++)
+		nps_msu_reg_low_addr[cluster] =
+			nps_host_reg((cluster << NPS_CLUSTER_OFFSET),
+				 NPS_MSU_BLKID, NPS_MSU_TICK_LOW);
+
+	ret = clk_prepare_enable(clk);
+	if (ret) {
+		pr_err("Couldn't enable parent clock\n");
+		return;
+	}
+
+	nps_timer_rate = clk_get_rate(clk);
+
+	ret = clocksource_mmio_init(nps_msu_reg_low_addr, "EZnps-tick",
+				    nps_timer_rate, 301, 32, nps_clksrc_read);
+	if (ret) {
+		pr_err("Couldn't register clock source.\n");
+		clk_disable_unprepare(clk);
+	}
+}
+
+static void __init nps_timer_init(struct device_node *node)
+{
+	struct clk *clk;
+
+	clk = of_clk_get(node, 0);
+	if (IS_ERR(clk)) {
+		pr_err("Can't get timer clock.\n");
+		return;
+	}
+
+	nps_setup_clocksource(node, clk);
+}
+
+CLOCKSOURCE_OF_DECLARE(ezchip_nps400_clksrc, "ezchip,nps400-timer",
+		       nps_timer_init);
-- 
1.7.1

  parent reply	other threads:[~2016-02-11 18:58 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-02 13:14 [PATCH v2 0/3] Adding NPS400 drivers Noam Camus
2016-02-02 13:14 ` [PATCH v2 1/3] soc: Support for EZchip SoC Noam Camus
2016-02-02 13:14 ` [PATCH v2 2/3] clocksource: Add NPS400 timers driver Noam Camus
2016-02-02 14:36   ` kbuild test robot
2016-02-02 13:14 ` [PATCH v2 3/3] irqchip: add nps Internal and external irqchips Noam Camus
2016-02-02 13:35   ` Thomas Gleixner
2016-02-02 20:40   ` kbuild test robot
2016-02-06 16:16 ` [PATCH v3 0/3] Adding NPS400 drivers Noam Camus
2016-02-11  3:02   ` [PATCH v4 " Noam Camus
2016-02-11 18:40     ` [PATCH v5 " Noam Camus
2016-02-17  7:05       ` Noam Camus
2016-02-11 18:40     ` [PATCH v5 1/3] soc: Support for EZchip SoC Noam Camus
2016-02-11 18:40     ` Noam Camus [this message]
2016-02-11 20:29       ` [PATCH v5 2/3] clocksource: Add NPS400 timers driver Daniel Lezcano
2016-02-11 18:40     ` [PATCH v5 3/3] irqchip: add nps Internal and external irqchips Noam Camus
2016-02-19 14:03       ` Jason Cooper
2016-02-19 14:42         ` Noam Camus
2016-02-11  3:02   ` [PATCH v4 1/3] soc: Support for EZchip SoC Noam Camus
2016-02-11  3:02   ` [PATCH v4 2/3] clocksource: Add NPS400 timers driver Noam Camus
2016-02-11  8:18     ` Daniel Lezcano
2016-02-11  3:02   ` [PATCH v4 3/3] irqchip: add nps Internal and external irqchips Noam Camus
2016-02-06 16:16 ` [PATCH v3 1/3] soc: Support for EZchip SoC Noam Camus
2016-02-06 16:16 ` [PATCH v3 2/3] clocksource: Add NPS400 timers driver Noam Camus
2016-02-08 14:21   ` Daniel Lezcano
2016-02-09 12:36     ` Noam Camus
2016-02-09 13:38       ` Daniel Lezcano
2016-02-09 21:47         ` Noam Camus
2016-02-09 22:55           ` Daniel Lezcano
2016-02-10  8:01             ` Noam Camus
2016-02-06 16:16 ` [PATCH v3 3/3] irqchip: add nps Internal and external irqchips Noam Camus

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1455216059-29632-3-git-send-email-noamc@ezchip.com \
    --to=noamc@ezchip.com \
    --cc=cmetcalf@ezchip.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=giladb@ezchip.com \
    --cc=john.stultz@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-snps-arc@lists.infradead.org \
    --cc=marc.zyngier@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=talz@ezchip.com \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®