From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752810AbcBOKbj (ORCPT ); Mon, 15 Feb 2016 05:31:39 -0500 Received: from mirror2.csie.ntu.edu.tw ([140.112.30.76]:41516 "EHLO wens.csie.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751160AbcBOKbe (ORCPT ); Mon, 15 Feb 2016 05:31:34 -0500 From: Chen-Yu Tsai To: Lee Jones , Liam Girdwood , Mark Brown , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Maxime Ripard Cc: Chen-Yu Tsai , linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com Subject: [PATCH v2 00/10] mfd: axp20x: Add support for AXP809 PMIC Date: Mon, 15 Feb 2016 18:31:18 +0800 Message-Id: <1455532288-30870-1-git-send-email-wens@csie.org> X-Mailer: git-send-email 2.7.0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi everyone, This is v2 of the AXP809 PMIC support series. This adds support for X-Powers' AXP809 PMIC. This is the primary PMIC accompanying Allwinner's A80 SoC. For now, only the power button (PEK) and regulators are supported. These are supported using existing axp20x drivers. This is based on the AXP223 series v8, as well as 2 patches from v1 that are already in regulator/topic/axp20x. Changes since v1: - Added patch 4, changing default regulator names to lowercase. - Dropped regulator nodes from axp809.dtsi. Patch 1 adds a MAINTAINERS entry for the X-Powers AXP PMICs. I list myself as the maintainer. Patch 2 adds AXP809 to the axp20x bindings. Patch 3 adds AXP809 support to the axp20x mfd driver. Patch 4 changes the in-kernel default regulator names from uppercase to lowercase, making it easier on the eye. Patch 5 adds AXP809 support to the axp20x regulator driver. This patch depends on patch 3, and patches already in regulator/topic/axp20x. Patch 6 adds a dtsi file for AXP809. Patch 7 enables AXP809 support on the A80 Optimus board. Patch 8 enables AXP809 support on the Cubieboard 4. Patch 9 disables the dummy regulators from sunxi-common-regulators.dtsi on the A80 Optimus board. These aren't used in the board DTS anymore. Patch 10 disables the dummy regulators from sunxi-common-regulators.dtsi, on the Cubieboard4. These aren't used in the board DTS anymore. Regards ChenYu Chen-Yu Tsai (10): MAINTAINERS: Add entry for X-Powers AXP family PMIC drivers mfd: axp20x: Add bindings for AXP809 PMIC mfd: axp20x: Add support for AXP809 PMIC regulator: axp20x: Use of_match name as default regulator name regulator: axp20x: support AXP809 variant ARM: dts: sunxi: Add dtsi file for AXP809 PMIC ARM: dts: sun9i: a80-optimus: Add AXP809 PMIC device node and regulators ARM: dts: sun9i: cubieboard4: Add AXP809 PMIC device node and regulators ARM: dts: sun9i: a80-optimus: Disable dummy regulators vcc3v0, vcc3v3, vcc5v0 ARM: dts: sun9i: cubieboard4: Disable dummy regulators vcc3v0, vcc3v3, vcc5v0 Documentation/devicetree/bindings/mfd/axp20x.txt | 31 ++++- MAINTAINERS | 6 + .../dts/{sun9i-a80-cubieboard4.dts => axp809.dtsi} | 98 ++------------ arch/arm/boot/dts/sun9i-a80-cubieboard4.dts | 143 ++++++++++++++++++++- arch/arm/boot/dts/sun9i-a80-optimus.dts | 143 ++++++++++++++++++++- drivers/mfd/axp20x-rsb.c | 1 + drivers/mfd/axp20x.c | 79 ++++++++++++ drivers/regulator/axp20x-regulator.c | 129 ++++++++++++++----- include/linux/mfd/axp20x.h | 59 +++++++++ 9 files changed, 559 insertions(+), 130 deletions(-) copy arch/arm/boot/dts/{sun9i-a80-cubieboard4.dts => axp809.dtsi} (52%) -- 2.7.0