From: MaJun <majun258@huawei.com>
To: <Catalin.Marinas@arm.com>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>, <Will.Deacon@arm.com>,
<mark.rutland@arm.com>, <marc.zyngier@arm.com>,
<jason@lakedaemon.net>, <tglx@linutronix.de>,
<lizefan@huawei.com>, <huxinwei@huawei.com>,
<dingtianhong@huawei.com>, <liguozhu@hisilicon.com>,
<guohanjun@huawei.com>, <majun258@huawei.com>,
<zhaojunhua@hisilicon.com>
Subject: [PATCH v2 5/5] irqchip:implement the mbigen irq chip operation functions
Date: Tue, 16 Feb 2016 14:37:28 +0800 [thread overview]
Message-ID: <1455604648-20668-6-git-send-email-majun258@huawei.com> (raw)
In-Reply-To: <1455604648-20668-1-git-send-email-majun258@huawei.com>
From: Ma Jun <majun258@huawei.com>
Add the interrupt controller chip operation functions of mbigen chip.
Signed-off-by: Ma Jun <majun258@huawei.com>
---
drivers/irqchip/irq-mbigen-v1.c | 75 +++++++++++++++++++++++++++++++++++++++
1 files changed, 75 insertions(+), 0 deletions(-)
diff --git a/drivers/irqchip/irq-mbigen-v1.c b/drivers/irqchip/irq-mbigen-v1.c
index 61e7ad0..0636165 100644
--- a/drivers/irqchip/irq-mbigen-v1.c
+++ b/drivers/irqchip/irq-mbigen-v1.c
@@ -41,6 +41,20 @@
#define REG_MBIGEN_EXT_VEC_OFFSET 0x320
/**
+ * offset of clear register in mbigen node
+ * This register is used to clear the status
+ * of interrupt
+ */
+#define REG_MBIGEN_CLEAR_OFFSET 0x100
+
+/**
+ * offset of interrupt type register
+ * This register is used to configure interrupt
+ * trigger type
+ */
+#define REG_MBIGEN_TYPE_OFFSET 0x0
+
+/**
* struct mbigen_device - holds the information of mbigen device.
*
* @pdev: pointer to the platform device structure of mbigen chip.
@@ -77,8 +91,69 @@ static inline unsigned int get_mbigen_vec_reg(irq_hw_number_t hwirq)
return (nid - 4) * 4 + REG_MBIGEN_EXT_VEC_OFFSET;
}
+static inline void get_mbigen_type_reg(irq_hw_number_t hwirq,
+ u32 *mask, u32 *addr)
+{
+ int ofst;
+
+ ofst = hwirq / 32 * 4;
+ *mask = 1 << (hwirq % 32);
+
+ *addr = ofst + REG_MBIGEN_TYPE_OFFSET;
+}
+
+static inline void get_mbigen_clear_reg(irq_hw_number_t hwirq,
+ u32 *mask, u32 *addr)
+{
+ unsigned int ofst;
+
+ ofst = hwirq / 32 * 4;
+
+ *mask = 1 << (hwirq % 32);
+ *addr = ofst + REG_MBIGEN_CLEAR_OFFSET;
+}
+
+static void mbigen_eoi_irq(struct irq_data *data)
+{
+ void __iomem *base = data->chip_data;
+ u32 mask, addr;
+
+ get_mbigen_clear_reg(data->hwirq, &mask, &addr);
+
+ writel_relaxed(mask, base + addr);
+
+ irq_chip_eoi_parent(data);
+}
+
+static int mbigen_set_type(struct irq_data *data, unsigned int type)
+{
+ void __iomem *base = data->chip_data;
+ u32 mask, addr, val;
+
+ if (type != IRQ_TYPE_LEVEL_HIGH && type != IRQ_TYPE_EDGE_RISING)
+ return -EINVAL;
+
+ get_mbigen_type_reg(data->hwirq, &mask, &addr);
+
+ val = readl_relaxed(base + addr);
+
+ if (type == IRQ_TYPE_LEVEL_HIGH)
+ val |= mask;
+ else
+ val &= ~mask;
+
+ writel_relaxed(val, base + addr);
+
+ return 0;
+}
+
static struct irq_chip mbigen_irq_chip = {
.name = "mbigen-v1",
+ .irq_mask = irq_chip_mask_parent,
+ .irq_unmask = irq_chip_unmask_parent,
+ .irq_eoi = mbigen_eoi_irq,
+ .irq_set_type = mbigen_set_type,
+ .irq_set_affinity = irq_chip_set_affinity_parent,
};
static void mbigen_write_msg(struct msi_desc *desc, struct msi_msg *msg)
--
1.7.1
prev parent reply other threads:[~2016-02-16 6:38 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-16 6:37 [PATCH v2 0/5] irqchip: Add support for Hisilicon mbigen v1 chip MaJun
2016-02-16 6:37 ` [PATCH v2 1/5] dt-binding: Change the mbigen binding file to support the mbigen-v1 MaJun
2016-02-16 6:37 ` [PATCH v2 2/5] dt-binding:Rename the mbigen binding file name MaJun
2016-02-16 6:37 ` [PATCH v2 3/5] irqchip: add platform device driver for mbigen device MaJun
2016-02-16 6:37 ` [PATCH v2 4/5] irqchip:create irq domain for each " MaJun
2016-02-16 8:50 ` Marc Zyngier
2016-02-17 4:18 ` majun (F)
2016-02-17 7:47 ` Marc Zyngier
2016-02-16 6:37 ` MaJun [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1455604648-20668-6-git-send-email-majun258@huawei.com \
--to=majun258@huawei.com \
--cc=Catalin.Marinas@arm.com \
--cc=Will.Deacon@arm.com \
--cc=dingtianhong@huawei.com \
--cc=guohanjun@huawei.com \
--cc=huxinwei@huawei.com \
--cc=jason@lakedaemon.net \
--cc=liguozhu@hisilicon.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lizefan@huawei.com \
--cc=marc.zyngier@arm.com \
--cc=mark.rutland@arm.com \
--cc=tglx@linutronix.de \
--cc=zhaojunhua@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®