[PATCH V5 05/15] x86, pci: Cleanup platform specific MCFG data by using ECAM hot_added flag.

[Tomasz Nowicki <tn@semihalf.com>]

x86 uses lots of arch-specific data to maintain MCFG regions.
However, there is no need to. Firstly, information like start_bus, end_bus
can be obtained from acpi_pci_root structure. Secondly, mcfg_added flag
is already integrated to MCFG library, so it is enough to call functions
pci_mmconfig_insert and pci_mmconfig_delete which are handling
hot-plugged MCFG regions internally.

This patch implements above improvements, as a results we get
much smaller pci_root_info structure.

Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
Tested-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Tested-by: Duc Dang <dhdang@apm.com>
Tested-by: Dongdong Liu <liudongdong3@huawei.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Graeme Gregory <graeme.gregory@linaro.org>
Tested-by: Sinan Kaya <okaya@codeaurora.org>
---
 arch/x86/pci/acpi.c | 30 ++++++++----------------------
 1 file changed, 8 insertions(+), 22 deletions(-)

diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index cec68e7..081dc70 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -11,11 +11,6 @@
 struct pci_root_info {
 	struct acpi_pci_root_info common;
 	struct pci_sysdata sd;
-#ifdef	CONFIG_PCI_MMCONFIG
-	bool mcfg_added;
-	u8 start_bus;
-	u8 end_bus;
-#endif
 };
 
 static bool pci_use_crs = true;
@@ -179,16 +174,13 @@ static int check_segment(u16 seg, struct device *dev, char *estr)
 
 static int setup_mcfg_map(struct acpi_pci_root_info *ci)
 {
-	int result, seg;
-	struct pci_root_info *info;
+	int result, seg, start, end;
 	struct acpi_pci_root *root = ci->root;
 	struct device *dev = &ci->bridge->dev;
 
-	info = container_of(ci, struct pci_root_info, common);
-	info->start_bus = (u8)root->secondary.start;
-	info->end_bus = (u8)root->secondary.end;
-	info->mcfg_added = false;
-	seg = info->sd.domain;
+	seg = root->segment;
+	start = root->secondary.start;
+	end = root->secondary.end;
 
 	/* return success if MMCFG is not in use */
 	if (raw_pci_ext_ops && raw_pci_ext_ops != &pci_mmcfg)
@@ -197,13 +189,11 @@ static int setup_mcfg_map(struct acpi_pci_root_info *ci)
 	if (!(pci_probe & PCI_PROBE_MMCONF))
 		return check_segment(seg, dev, "MMCONFIG is disabled,");
 
-	result = pci_mmconfig_insert(dev, seg, info->start_bus, info->end_bus,
-				     root->mcfg_addr);
+	result = pci_mmconfig_insert(dev, seg, start, end, root->mcfg_addr);
 	if (result == 0) {
 		/* enable MMCFG if it hasn't been enabled yet */
 		if (raw_pci_ext_ops == NULL)
 			raw_pci_ext_ops = &pci_mmcfg;
-		info->mcfg_added = true;
 	} else if (result != -EEXIST)
 		return check_segment(seg, dev,
 			 "fail to add MMCONFIG information,");
@@ -213,14 +203,10 @@ static int setup_mcfg_map(struct acpi_pci_root_info *ci)
 
 static void teardown_mcfg_map(struct acpi_pci_root_info *ci)
 {
-	struct pci_root_info *info;
+	struct acpi_pci_root *root = ci->root;
 
-	info = container_of(ci, struct pci_root_info, common);
-	if (info->mcfg_added) {
-		pci_mmconfig_delete(info->sd.domain,
-				    info->start_bus, info->end_bus);
-		info->mcfg_added = false;
-	}
+	pci_mmconfig_delete(root->segment, root->secondary.start,
+			    root->secondary.end);
 }
 #else
 static int setup_mcfg_map(struct acpi_pci_root_info *ci)
-- 
1.9.1