mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Arnd Bergmann <arnd@arndb.de>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-arm-kernel@lists.infradead.org,
	Arnd Bergmann <arnd@arndb.de>,
	Paul Gortmaker <paul.gortmaker@windriver.com>,
	linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org,
	Masahiro Yamada <yamada.masahiro@socionext.com>,
	Peter Hurley <peter@hurleysoftware.com>,
	Jiri Slaby <jslaby@suse.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Eddie Huang <eddie.huang@mediatek.com>,
	linux-mediatek@lists.infradead.org
Subject: [PATCH v3 1/5] Revert "drivers/tty/serial: make 8250/8250_mtk.c explicitly non-modular"
Date: Wed, 17 Feb 2016 16:02:31 +0100	[thread overview]
Message-ID: <1455721357-4008289-2-git-send-email-arnd@arndb.de> (raw)
In-Reply-To: <1455721357-4008289-1-git-send-email-arnd@arndb.de>

This reverts commit d72d391c126e ("drivers/tty/serial: make
8250/8250_mtk.c explicitly non-modular"), which intended to remove dead
code but did not have the desired effect when the main 8250 driver was
a module itself.

This would normally result in a link error, but as the entire
drivers/tty/serial/8250/ directory is only entered when CONFIG_SERIAL_8250
is set, we never notice that the driver does not get built in this
configuration.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 drivers/tty/serial/8250/8250_mtk.c | 35 ++++++++++++++++++++++++++++-------
 1 file changed, 28 insertions(+), 7 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c
index 9038843cadc7..6ecc6e3e82dc 100644
--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -16,7 +16,7 @@
  */
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <linux/init.h>
+#include <linux/module.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
@@ -245,6 +245,23 @@ static int mtk8250_probe(struct platform_device *pdev)
 	return 0;
 }
 
+static int mtk8250_remove(struct platform_device *pdev)
+{
+	struct mtk8250_data *data = platform_get_drvdata(pdev);
+
+	pm_runtime_get_sync(&pdev->dev);
+
+	serial8250_unregister_port(data->line);
+
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
+
+	if (!pm_runtime_status_suspended(&pdev->dev))
+		mtk8250_runtime_suspend(&pdev->dev);
+
+	return 0;
+}
+
 static int __maybe_unused mtk8250_suspend(struct device *dev)
 {
 	struct mtk8250_data *data = dev_get_drvdata(dev);
@@ -273,18 +290,18 @@ static const struct of_device_id mtk8250_of_match[] = {
 	{ .compatible = "mediatek,mt6577-uart" },
 	{ /* Sentinel */ }
 };
+MODULE_DEVICE_TABLE(of, mtk8250_of_match);
 
 static struct platform_driver mtk8250_platform_driver = {
 	.driver = {
-		.name			= "mt6577-uart",
-		.pm			= &mtk8250_pm_ops,
-		.of_match_table		= mtk8250_of_match,
-		.suppress_bind_attrs	= true,
-
+		.name		= "mt6577-uart",
+		.pm		= &mtk8250_pm_ops,
+		.of_match_table	= mtk8250_of_match,
 	},
 	.probe			= mtk8250_probe,
+	.remove			= mtk8250_remove,
 };
-builtin_platform_driver(mtk8250_platform_driver);
+module_platform_driver(mtk8250_platform_driver);
 
 #ifdef CONFIG_SERIAL_8250_CONSOLE
 static int __init early_mtk8250_setup(struct earlycon_device *device,
@@ -300,3 +317,7 @@ static int __init early_mtk8250_setup(struct earlycon_device *device,
 
 OF_EARLYCON_DECLARE(mtk8250, "mediatek,mt6577-uart", early_mtk8250_setup);
 #endif
+
+MODULE_AUTHOR("Matthias Brugger");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Mediatek 8250 serial port driver");
-- 
2.7.0

  reply	other threads:[~2016-02-17 15:04 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-17 15:02 [PATCH v3 0/5] serial: 8250: fixes for modular build Arnd Bergmann
2016-02-17 15:02 ` Arnd Bergmann [this message]
2016-02-17 17:19   ` [PATCH v3 1/5] Revert "drivers/tty/serial: make 8250/8250_mtk.c explicitly non-modular" Matthias Brugger
2016-02-17 15:02 ` [PATCH v3 2/5] Revert "drivers/tty/serial: make 8250/8250_ingenic.c " Arnd Bergmann
2016-02-17 15:02 ` [PATCH v3 3/5] serial: 8250/uniphier: fix modular build Arnd Bergmann
2016-02-17 15:02 ` [PATCH v3 4/5] serial: 8250/ingenic: fix building with SERIAL_8250=m Arnd Bergmann
2016-02-17 15:02 ` [PATCH v3 5/5] serial: 8250/mediatek: " Arnd Bergmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1455721357-4008289-2-git-send-email-arnd@arndb.de \
    --to=arnd@arndb.de \
    --cc=eddie.huang@mediatek.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=jslaby@suse.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=matthias.bgg@gmail.com \
    --cc=paul.gortmaker@windriver.com \
    --cc=peter@hurleysoftware.com \
    --cc=s.hauer@pengutronix.de \
    --cc=yamada.masahiro@socionext.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®