mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Shawn Lin <shawn.lin@rock-chips.com>
To: Adrian Hunter <adrian.hunter@intel.com>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Rob Herring <robh+dt@kernel.org>
Cc: Michal Simek <michal.simek@xilinx.com>,
	soren.brinkmann@xilinx.com, linux-mmc@vger.kernel.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	Shawn Lin <shawn.lin@rock-chips.com>
Subject: [RESEND PATCH v5 2/2] mmc: sdhci-of-arasan: add phy support for sdhci-of-arasan
Date: Fri, 19 Feb 2016 10:20:20 +0800	[thread overview]
Message-ID: <1455848420-2293-1-git-send-email-shawn.lin@rock-chips.com> (raw)
In-Reply-To: <1455848322-2210-1-git-send-email-shawn.lin@rock-chips.com>

This patch adds Generic PHY access for sdhci-of-arasan. Driver
can get PHY handler from dt-binding, and power-on/init the PHY.
Currently, it's just mandatory for arasan,sdhci-5.1.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>

Serise-changes: 5
- remove rpm support from this serise
- fix some err case for handling phy

Serise-changes: 4
- remove suspend/resume_phy
- add err handle label for system PM callback
- fix comments of struct sdhci_arasan_data and system PM
  callback suggested by Michal

Serise-changes: 3
- remove phy_init/exit for suspend/resume
- adjust phy_int/power_on seq to make code more reasonable
- simplify suspend/resume_phy

Serise-changes: 2
- Keep phy as a mandatory requirement for arasan,sdhci-5.1

---

Changes in v2: None

 drivers/mmc/host/sdhci-of-arasan.c | 66 +++++++++++++++++++++++++++++++++++---
 1 file changed, 62 insertions(+), 4 deletions(-)

diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index 5d9fdb3..cc40b1d 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -21,6 +21,7 @@
 
 #include <linux/module.h>
 #include <linux/of_device.h>
+#include <linux/phy/phy.h>
 #include "sdhci-pltfm.h"
 
 #define SDHCI_ARASAN_CLK_CTRL_OFFSET	0x2c
@@ -32,9 +33,11 @@
 /**
  * struct sdhci_arasan_data
  * @clk_ahb:	Pointer to the AHB clock
+ * @phy: Pointer to the generic phy
  */
 struct sdhci_arasan_data {
 	struct clk	*clk_ahb;
+	struct phy	*phy;
 };
 
 static unsigned int sdhci_arasan_get_timeout_clock(struct sdhci_host *host)
@@ -72,7 +75,7 @@ static struct sdhci_pltfm_data sdhci_arasan_pdata = {
 /**
  * sdhci_arasan_suspend - Suspend method for the driver
  * @dev:	Address of the device structure
- * Returns 0 on success and error value on error
+ * Return: 0 on success and error value on error
  *
  * Put the device in a low power state.
  */
@@ -88,6 +91,14 @@ static int sdhci_arasan_suspend(struct device *dev)
 	if (ret)
 		return ret;
 
+	if (!IS_ERR(sdhci_arasan->phy)) {
+		ret = phy_power_off(sdhci_arasan->phy);
+		if (ret) {
+			dev_err(dev, "Cannot power off phy.\n");
+			return ret;
+		}
+	}
+
 	clk_disable(pltfm_host->clk);
 	clk_disable(sdhci_arasan->clk_ahb);
 
@@ -97,7 +108,7 @@ static int sdhci_arasan_suspend(struct device *dev)
 /**
  * sdhci_arasan_resume - Resume method for the driver
  * @dev:	Address of the device structure
- * Returns 0 on success and error value on error
+ * Return: 0 on success and error value on error
  *
  * Resume operation after suspend
  */
@@ -118,11 +129,24 @@ static int sdhci_arasan_resume(struct device *dev)
 	ret = clk_enable(pltfm_host->clk);
 	if (ret) {
 		dev_err(dev, "Cannot enable SD clock.\n");
-		clk_disable(sdhci_arasan->clk_ahb);
-		return ret;
+		goto err_clk_en;
+	}
+
+	if (!IS_ERR(sdhci_arasan->phy)) {
+		ret = phy_power_on(sdhci_arasan->phy);
+		if (ret) {
+			dev_err(dev, "Cannot power on phy.\n");
+			goto err_phy_power;
+		}
 	}
 
 	return sdhci_resume_host(host);
+
+err_phy_power:
+	clk_disable(pltfm_host->clk);
+err_clk_en:
+	clk_disable(sdhci_arasan->clk_ahb);
+	return ret;
 }
 #endif /* ! CONFIG_PM_SLEEP */
 
@@ -183,6 +207,30 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
 		goto clk_disable_all;
 	}
 
+	sdhci_arasan->phy = ERR_PTR(-ENODEV);
+	if (of_device_is_compatible(pdev->dev.of_node,
+				    "arasan,sdhci-5.1")) {
+		sdhci_arasan->phy = devm_phy_get(&pdev->dev,
+						 "phy_arasan");
+		if (IS_ERR(sdhci_arasan->phy)) {
+			ret = PTR_ERR(sdhci_arasan->phy);
+			dev_err(&pdev->dev, "No phy for arasan,sdhci-5.1.\n");
+			goto clk_disable_all;
+		}
+
+		ret = phy_init(sdhci_arasan->phy);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "phy_init err.\n");
+			goto clk_disable_all;
+		}
+
+		ret = phy_power_on(sdhci_arasan->phy);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "phy_power_on err.\n");
+			goto err_phy_power;
+		}
+	}
+
 	ret = sdhci_add_host(host);
 	if (ret)
 		goto err_pltfm_free;
@@ -190,7 +238,12 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
 	return 0;
 
 err_pltfm_free:
+	if (!IS_ERR(sdhci_arasan->phy))
+		phy_power_off(sdhci_arasan->phy);
 	sdhci_pltfm_free(pdev);
+err_phy_power:
+	if (!IS_ERR(sdhci_arasan->phy))
+		phy_exit(sdhci_arasan->phy);
 clk_disable_all:
 	clk_disable_unprepare(clk_xin);
 clk_dis_ahb:
@@ -205,6 +258,11 @@ static int sdhci_arasan_remove(struct platform_device *pdev)
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct sdhci_arasan_data *sdhci_arasan = pltfm_host->priv;
 
+	if (!IS_ERR(sdhci_arasan->phy)) {
+		phy_power_off(sdhci_arasan->phy);
+		phy_exit(sdhci_arasan->phy);
+	}
+
 	clk_disable_unprepare(sdhci_arasan->clk_ahb);
 
 	return sdhci_pltfm_unregister(pdev);
-- 
2.3.7

  parent reply	other threads:[~2016-02-19  2:24 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-19  2:18 [RESEND PATCH v5 0/2] Add phy support for arasan,sdhci-5.1 Shawn Lin
2016-02-19  2:19 ` [RESEND PATCH v5 1/2] Documentation: bindings: add description of phy for sdhci-of-arasan Shawn Lin
2016-02-23 20:29   ` Rob Herring
2016-02-19  2:20 ` Shawn Lin [this message]
2016-03-04  9:14   ` [RESEND PATCH v5 2/2] mmc: sdhci-of-arasan: add phy support " Adrian Hunter
2016-03-04 10:24     ` Shawn Lin
2016-03-04 12:12       ` Adrian Hunter
2016-03-05  1:55         ` Shawn Lin
     [not found] ` <CAPDyKFojtZamH-xwM9UTyWdeW3SSSS3-uUyVr2R1t9NkwCXvYg@mail.gmail.com>
2016-03-04  1:27   ` [RESEND PATCH v5 0/2] Add phy support for arasan,sdhci-5.1 Shawn Lin
2016-03-04  9:18     ` Adrian Hunter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1455848420-2293-1-git-send-email-shawn.lin@rock-chips.com \
    --to=shawn.lin@rock-chips.com \
    --cc=adrian.hunter@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=michal.simek@xilinx.com \
    --cc=robh+dt@kernel.org \
    --cc=soren.brinkmann@xilinx.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®