From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <linux-kernel-owner@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
	id S1758727AbcBTPxT (ORCPT <rfc822;w@1wt.eu>);
	Sat, 20 Feb 2016 10:53:19 -0500
Received: from mail-pf0-f177.google.com ([209.85.192.177]:35726 "EHLO
	mail-pf0-f177.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
	with ESMTP id S1758401AbcBTPxA (ORCPT
	<rfc822;linux-kernel@vger.kernel.org>);
	Sat, 20 Feb 2016 10:53:00 -0500
From: Leo Yan <leo.yan@linaro.org>
To: Wei Xu <xuwei5@hisilicon.com>, Rob Herring <robh+dt@kernel.org>,
        Pawel Moll <pawel.moll@arm.com>, Mark Rutland <mark.rutland@arm.com>,
        Ian Campbell <ijc+devicetree@hellion.org.uk>,
        Kumar Gala <galak@codeaurora.org>,
        Catalin Marinas <catalin.marinas@arm.com>,
        Will Deacon <will.deacon@arm.com>, Zhang Rui <rui.zhang@intel.com>,
        Eduardo Valentin <edubezval@gmail.com>,
        kongxinwei <kong.kongxinwei@hisilicon.com>,
        Javi Merino <javi.merino@arm.com>,
        Punit Agrawal <Punit.Agrawal@arm.com>
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
        Leo Yan <leo.yan@linaro.org>
Subject: [PATCH 3/3] arm64: dts: register Hi6220's thermal zone for power allocator
Date: Sat, 20 Feb 2016 23:52:09 +0800
Message-Id: <1455983529-9559-4-git-send-email-leo.yan@linaro.org>
X-Mailer: git-send-email 1.9.1
In-Reply-To: <1455983529-9559-1-git-send-email-leo.yan@linaro.org>
References: <1455983529-9559-1-git-send-email-leo.yan@linaro.org>
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

With profiling Hi6220's power modeling so get dynamic coefficient and
sustainable power. So pass these parameters from DT.

Now enable power allocator wit only one actor for CPU part, so directly
use cluster0's thermal sensor for monitoring temperature.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
---
 arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 36 +++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index 50ba1b0..3608a3e 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -6,6 +6,7 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/hi6220-clock.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	compatible = "hisilicon,hi6220";
@@ -87,6 +88,7 @@
 			cooling-max-level = <0>;
 			#cooling-cells = <2>; /* min followed by max */
 			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			dynamic-power-coefficient = <311>;
 		};
 
 		cpu1: cpu@1 {
@@ -322,5 +324,39 @@
 			clock-names = "thermal_clk";
 			#thermal-sensor-cells = <1>;
 		};
+
+		thermal-zones {
+
+			cls0: cls0 {
+				polling-delay = <1000>;
+				polling-delay-passive = <100>;
+				sustainable-power = <3326>;
+
+				/* sensor ID */
+				thermal-sensors = <&tsensor 2>;
+
+				trips {
+					threshold: trip-point@0 {
+						temperature = <65000>;
+						hysteresis = <1000>;
+						type = "passive";
+					};
+
+					target: trip-point@1 {
+						temperature = <75000>;
+						hysteresis = <1000>;
+						type = "passive";
+					};
+				};
+
+				cooling-maps {
+					map0 {
+						trip = <&target>;
+						contribution = <1024>;
+						cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					};
+				};
+			};
+		};
 	};
 };
-- 
1.9.1