From: Prarit Bhargava <prarit@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: Prarit Bhargava <prarit@redhat.com>,
Petr Mladek <pmladek@suse.com>,
John Stultz <john.stultz@linaro.org>,
Xunlei Pang <pang.xunlei@linaro.org>,
Thomas Gleixner <tglx@linutronix.de>,
Baolin Wang <baolin.wang@linaro.org>,
Andrew Morton <akpm@linux-foundation.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Petr Mladek <pmladek@suse.cz>, Tejun Heo <tj@kernel.org>,
Peter Hurley <peter@hurleysoftware.com>,
Vasily Averin <vvs@virtuozzo.com>, Joe Perches <joe@perches.com>
Subject: [PATCH 0/2 v6] printk, Add monotonic and real printk timestamps
Date: Tue, 23 Feb 2016 12:53:58 -0500 [thread overview]
Message-ID: <1456250040-22351-1-git-send-email-prarit@redhat.com> (raw)
This patchset adds monotonic and real printk timestamps. The first patch
changes CONFIG_PRINT_TIME from a bool to an int to allow for the additional
timestamps that are added in patch 2.
Changes from v6: Petr Mladek pointed out that the current patch
fails to indicate to userspace programs which timestamp is being used.
Additionally he pointed out that no other config option uses a mix of bool and
integers the way CONFIG_PRINTK_TIME would have done after my patch. This
results in a patch to modify CONFIG_PRINTK_TIME to switch to int (which
includes modifications to config files) and a second patch to
implement the new timestamps.
Additionally, while testing the dmesg utility I noticed a difference in
behaviour between the old CONFIG_PRINTK_TIME=n and CONFIG_PRINTK_TIME=0
(both of which disabled timestamp on the console). In the new case
the dmesg output always included 0.000000 timestamp instead of the actual time.
I have fixed this by recording (but not writing to the console) the timestamp
for 0 and 1 in printk_get_ts() so that dmesg behaves as before.
Cc: Petr Mladek <pmladek@suse.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Xunlei Pang <pang.xunlei@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Baolin Wang <baolin.wang@linaro.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Vasily Averin <vvs@virtuozzo.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Prarit Bhargava (2):
lib, switch CONFIG_PRINTK_TIME to int
printk, allow different timestamps for printk.time
Documentation/kernel-parameters.txt | 6 +-
arch/arm/configs/axm55xx_defconfig | 2 +-
arch/arm/configs/bcm2835_defconfig | 2 +-
arch/arm/configs/bcm_defconfig | 2 +-
arch/arm/configs/colibri_pxa270_defconfig | 2 +-
arch/arm/configs/colibri_pxa300_defconfig | 2 +-
arch/arm/configs/dove_defconfig | 2 +-
arch/arm/configs/efm32_defconfig | 2 +-
arch/arm/configs/exynos_defconfig | 2 +-
arch/arm/configs/ezx_defconfig | 2 +-
arch/arm/configs/h5000_defconfig | 2 +-
arch/arm/configs/hisi_defconfig | 2 +-
arch/arm/configs/imote2_defconfig | 2 +-
arch/arm/configs/imx_v6_v7_defconfig | 2 +-
arch/arm/configs/keystone_defconfig | 2 +-
arch/arm/configs/lpc18xx_defconfig | 2 +-
arch/arm/configs/magician_defconfig | 2 +-
arch/arm/configs/mmp2_defconfig | 2 +-
arch/arm/configs/moxart_defconfig | 2 +-
arch/arm/configs/multi_v7_defconfig | 2 +-
arch/arm/configs/mvebu_v7_defconfig | 2 +-
arch/arm/configs/mxs_defconfig | 2 +-
arch/arm/configs/omap2plus_defconfig | 2 +-
arch/arm/configs/pxa168_defconfig | 2 +-
arch/arm/configs/pxa3xx_defconfig | 2 +-
arch/arm/configs/pxa910_defconfig | 2 +-
arch/arm/configs/pxa_defconfig | 2 +-
arch/arm/configs/qcom_defconfig | 2 +-
arch/arm/configs/raumfeld_defconfig | 2 +-
arch/arm/configs/shmobile_defconfig | 2 +-
arch/arm/configs/socfpga_defconfig | 2 +-
arch/arm/configs/stm32_defconfig | 2 +-
arch/arm/configs/sunxi_defconfig | 2 +-
arch/arm/configs/tegra_defconfig | 2 +-
arch/arm/configs/u300_defconfig | 2 +-
arch/arm/configs/u8500_defconfig | 2 +-
arch/arm/configs/vt8500_v6_v7_defconfig | 2 +-
arch/arm/configs/xcep_defconfig | 2 +-
arch/arm/configs/zx_defconfig | 2 +-
arch/arm64/configs/defconfig | 2 +-
arch/mips/configs/bcm47xx_defconfig | 2 +-
arch/mips/configs/bmips_be_defconfig | 2 +-
arch/mips/configs/bmips_stb_defconfig | 2 +-
arch/mips/configs/ci20_defconfig | 2 +-
arch/mips/configs/lemote2f_defconfig | 2 +-
arch/mips/configs/loongson3_defconfig | 2 +-
arch/mips/configs/nlm_xlp_defconfig | 2 +-
arch/mips/configs/nlm_xlr_defconfig | 2 +-
arch/mips/configs/pistachio_defconfig | 2 +-
arch/mips/configs/qi_lb60_defconfig | 2 +-
arch/mips/configs/rt305x_defconfig | 2 +-
arch/mips/configs/xway_defconfig | 2 +-
arch/parisc/configs/generic-64bit_defconfig | 2 +-
arch/powerpc/configs/40x/virtex_defconfig | 2 +-
arch/powerpc/configs/44x/virtex5_defconfig | 2 +-
arch/powerpc/configs/44x/warp_defconfig | 2 +-
arch/powerpc/configs/52xx/cm5200_defconfig | 2 +-
arch/powerpc/configs/52xx/lite5200b_defconfig | 2 +-
arch/powerpc/configs/52xx/motionpro_defconfig | 2 +-
arch/powerpc/configs/52xx/tqm5200_defconfig | 2 +-
arch/powerpc/configs/gamecube_defconfig | 2 +-
arch/powerpc/configs/mpc5200_defconfig | 2 +-
arch/powerpc/configs/pasemi_defconfig | 2 +-
arch/powerpc/configs/wii_defconfig | 2 +-
arch/s390/configs/default_defconfig | 2 +-
arch/s390/configs/gcov_defconfig | 2 +-
arch/s390/configs/performance_defconfig | 2 +-
arch/s390/configs/zfcpdump_defconfig | 2 +-
arch/sh/configs/edosk7760_defconfig | 2 +-
arch/sh/configs/sdk7786_defconfig | 2 +-
arch/sh/configs/se7722_defconfig | 2 +-
arch/sh/configs/sh7785lcr_32bit_defconfig | 2 +-
arch/sh/configs/urquell_defconfig | 2 +-
arch/sparc/configs/sparc64_defconfig | 2 +-
arch/x86/configs/i386_defconfig | 2 +-
arch/x86/configs/x86_64_defconfig | 2 +-
arch/xtensa/configs/audio_kc705_defconfig | 2 +-
arch/xtensa/configs/generic_kc705_defconfig | 2 +-
arch/xtensa/configs/nommu_kc705_defconfig | 2 +-
arch/xtensa/configs/smp_lx200_defconfig | 2 +-
include/linux/timekeeping.h | 1 +
kernel/printk/printk.c | 76 ++++++++++++++++++++--
kernel/time/timekeeping.c | 13 ++++
lib/Kconfig.debug | 8 ++-
.../selftests/rcutorture/configs/lock/CFcommon | 2 +-
.../selftests/rcutorture/configs/rcu/CFcommon | 2 +-
86 files changed, 177 insertions(+), 89 deletions(-)
--
1.8.3.1
next reply other threads:[~2016-02-23 17:54 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-23 17:53 Prarit Bhargava [this message]
2016-02-23 17:53 ` [PATCH 1/2 v6] lib, switch CONFIG_PRINTK_TIME to int Prarit Bhargava
2016-02-23 17:54 ` [PATCH 2/2 v6] printk, allow different timestamps for printk.time Prarit Bhargava
2016-03-08 7:59 ` [PATCH 0/2 v6] printk, Add monotonic and real printk timestamps Thomas Gleixner
2016-03-08 11:03 ` Prarit Bhargava
2016-03-10 10:00 ` Petr Mladek
2016-03-10 15:35 ` Thomas Gleixner
2016-04-18 15:30 ` Prarit Bhargava
2016-04-19 8:56 ` Petr Mladek
2016-04-20 17:09 ` Prarit Bhargava
2016-04-21 13:20 ` Prarit Bhargava
2016-04-26 13:00 ` Petr Mladek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1456250040-22351-1-git-send-email-prarit@redhat.com \
--to=prarit@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=baolin.wang@linaro.org \
--cc=gregkh@linuxfoundation.org \
--cc=joe@perches.com \
--cc=john.stultz@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pang.xunlei@linaro.org \
--cc=peter@hurleysoftware.com \
--cc=pmladek@suse.com \
--cc=pmladek@suse.cz \
--cc=tglx@linutronix.de \
--cc=tj@kernel.org \
--cc=vvs@virtuozzo.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome