From: Florian Fainelli <f.fainelli@gmail.com>
To: linux-mtd@lists.infradead.org
Cc: Florian Fainelli <f.fainelli@gmail.com>,
Brian Norris <computersforpeace@gmail.com>,
Kamal Dasu <kdasu.kdev@gmail.com>,
David Woodhouse <dwmw2@infradead.org>,
bcm-kernel-feedback-list@broadcom.com (open list:BROADCOM STB
NAND FLASH DRIVER), linux-kernel@vger.kernel.org (open list)
Subject: [PATCH] mtd: brcmnand: Fix v7.1 register offsets
Date: Wed, 24 Feb 2016 16:07:23 -0800 [thread overview]
Message-ID: <1456358843-16347-1-git-send-email-f.fainelli@gmail.com> (raw)
The BRCMNAND controller revision 7.1 is almost 100% compatible with the
previous v6.0 register offset layout, except for the Correctable Error
Reporting Threshold registers. Fix this by adding another table with the
correct offsets for CORR_THRESHOLD and CORR_THRESHOLD_EXT.
Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/mtd/nand/brcmnand/brcmnand.c | 34 +++++++++++++++++++++++++++++++++-
1 file changed, 33 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/brcmnand/brcmnand.c b/drivers/mtd/nand/brcmnand/brcmnand.c
index 844fc07d22cd..f7009c1cb90c 100644
--- a/drivers/mtd/nand/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/brcmnand/brcmnand.c
@@ -311,6 +311,36 @@ static const u16 brcmnand_regs_v60[] = {
[BRCMNAND_FC_BASE] = 0x400,
};
+/* BRCMNAND v7.1 */
+static const u16 brcmnand_regs_v71[] = {
+ [BRCMNAND_CMD_START] = 0x04,
+ [BRCMNAND_CMD_EXT_ADDRESS] = 0x08,
+ [BRCMNAND_CMD_ADDRESS] = 0x0c,
+ [BRCMNAND_INTFC_STATUS] = 0x14,
+ [BRCMNAND_CS_SELECT] = 0x18,
+ [BRCMNAND_CS_XOR] = 0x1c,
+ [BRCMNAND_LL_OP] = 0x20,
+ [BRCMNAND_CS0_BASE] = 0x50,
+ [BRCMNAND_CS1_BASE] = 0,
+ [BRCMNAND_CORR_THRESHOLD] = 0xdc,
+ [BRCMNAND_CORR_THRESHOLD_EXT] = 0xe0,
+ [BRCMNAND_UNCORR_COUNT] = 0xfc,
+ [BRCMNAND_CORR_COUNT] = 0x100,
+ [BRCMNAND_CORR_EXT_ADDR] = 0x10c,
+ [BRCMNAND_CORR_ADDR] = 0x110,
+ [BRCMNAND_UNCORR_EXT_ADDR] = 0x114,
+ [BRCMNAND_UNCORR_ADDR] = 0x118,
+ [BRCMNAND_SEMAPHORE] = 0x150,
+ [BRCMNAND_ID] = 0x194,
+ [BRCMNAND_ID_EXT] = 0x198,
+ [BRCMNAND_LL_RDATA] = 0x19c,
+ [BRCMNAND_OOB_READ_BASE] = 0x200,
+ [BRCMNAND_OOB_READ_10_BASE] = 0,
+ [BRCMNAND_OOB_WRITE_BASE] = 0x280,
+ [BRCMNAND_OOB_WRITE_10_BASE] = 0,
+ [BRCMNAND_FC_BASE] = 0x400,
+};
+
enum brcmnand_cs_reg {
BRCMNAND_CS_CFG_EXT = 0,
BRCMNAND_CS_CFG,
@@ -406,7 +436,9 @@ static int brcmnand_revision_init(struct brcmnand_controller *ctrl)
}
/* Register offsets */
- if (ctrl->nand_version >= 0x0600)
+ if (ctrl->nand_version >= 0x0701)
+ ctrl->reg_offsets = brcmnand_regs_v71;
+ else if (ctrl->nand_version >= 0x0600)
ctrl->reg_offsets = brcmnand_regs_v60;
else if (ctrl->nand_version >= 0x0500)
ctrl->reg_offsets = brcmnand_regs_v50;
--
2.1.0
next reply other threads:[~2016-02-25 0:09 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-25 0:07 Florian Fainelli [this message]
2016-02-25 17:50 ` Brian Norris
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1456358843-16347-1-git-send-email-f.fainelli@gmail.com \
--to=f.fainelli@gmail.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=computersforpeace@gmail.com \
--cc=dwmw2@infradead.org \
--cc=kdasu.kdev@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®