From: John Crispin <blogic@openwrt.org>
To: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
"Matthias Brugger" <matthias.bgg@gmail.com>,
"Steven Liu (劉人豪)" <steven.liu@mediatek.com>,
"Carlos Huang (黃士彰)" <Carlos.Huang@mediatek.com>,
"Fred Chang (張嘉宏)" <Fred.Chang@mediatek.com>,
"John Crispin" <blogic@openwrt.org>,
"Felix Fietkau" <nbd@openwrt.org>,
"Michael Lee" <igvtee@gmail.com>
Subject: [PATCH V2 11/12] net-next: mediatek: add Kconfig and Makefile
Date: Fri, 26 Feb 2016 15:21:43 +0100 [thread overview]
Message-ID: <1456496504-50429-12-git-send-email-blogic@openwrt.org> (raw)
In-Reply-To: <1456496504-50429-1-git-send-email-blogic@openwrt.org>
This patch adds the Makefile and Kconfig required to make the driver build.
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Michael Lee <igvtee@gmail.com>
---
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/mediatek/Kconfig | 70 ++++++++++++++++++++++++++++++++
drivers/net/ethernet/mediatek/Makefile | 23 +++++++++++
4 files changed, 95 insertions(+)
create mode 100644 drivers/net/ethernet/mediatek/Kconfig
create mode 100644 drivers/net/ethernet/mediatek/Makefile
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 31c5e47..cd28b95 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -106,6 +106,7 @@ config LANTIQ_ETOP
Support for the MII0 inside the Lantiq SoC
source "drivers/net/ethernet/marvell/Kconfig"
+source "drivers/net/ethernet/mediatek/Kconfig"
source "drivers/net/ethernet/mellanox/Kconfig"
source "drivers/net/ethernet/micrel/Kconfig"
source "drivers/net/ethernet/microchip/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 071f84e..c62191f 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -46,6 +46,7 @@ obj-$(CONFIG_JME) += jme.o
obj-$(CONFIG_KORINA) += korina.o
obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o
obj-$(CONFIG_NET_VENDOR_MARVELL) += marvell/
+obj-$(CONFIG_NET_VENDOR_MEDIATEK) += mediatek/
obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
obj-$(CONFIG_NET_VENDOR_MICREL) += micrel/
obj-$(CONFIG_NET_VENDOR_MICROCHIP) += microchip/
diff --git a/drivers/net/ethernet/mediatek/Kconfig b/drivers/net/ethernet/mediatek/Kconfig
new file mode 100644
index 0000000..a9b9434
--- /dev/null
+++ b/drivers/net/ethernet/mediatek/Kconfig
@@ -0,0 +1,70 @@
+config NET_VENDOR_MEDIATEK
+ tristate "Mediatek/Ralink ethernet driver"
+ depends on RALINK || ARCH_MEDIATEK
+ help
+ This driver supports the ethernet mac inside the Mediatek and Ralink WiSoCs
+
+config NET_MEDIATEK_SOC
+ def_tristate NET_VENDOR_MEDIATEK
+
+if NET_MEDIATEK_SOC
+choice
+ prompt "MAC type"
+
+config NET_MEDIATEK_RT2880
+ bool "RT2882"
+ depends on MIPS && SOC_RT288X
+
+config NET_MEDIATEK_RT3050
+ bool "RT3050/MT7628"
+ depends on MIPS && (SOC_RT305X || SOC_MT7620)
+
+config NET_MEDIATEK_RT3883
+ bool "RT3883"
+ depends on MIPS && SOC_RT3883
+
+config NET_MEDIATEK_MT7620
+ bool "MT7620"
+ depends on MIPS && SOC_MT7620
+
+config NET_MEDIATEK_MT7621
+ bool "MT7621"
+ depends on MIPS && SOC_MT7621
+
+config NET_MEDIATEK_MT7623
+ bool "MT7623"
+ depends on ARM && MACH_MT7623
+
+endchoice
+
+config NET_MEDIATEK_MDIO
+ def_bool NET_MEDIATEK_SOC
+ depends on (NET_MEDIATEK_RT2880 || NET_MEDIATEK_RT3883 || NET_MEDIATEK_MT7620 || NET_MEDIATEK_MT7621 || NET_MEDIATEK_MT7623)
+ select PHYLIB
+
+config NET_MEDIATEK_MDIO_RT2880
+ def_bool NET_MEDIATEK_SOC
+ depends on (NET_MEDIATEK_RT2880 || NET_MEDIATEK_RT3883)
+ select NET_MEDIATEK_MDIO
+
+config NET_MEDIATEK_MDIO_MT7620
+ def_bool NET_MEDIATEK_SOC
+ depends on (NET_MEDIATEK_MT7620 || NET_MEDIATEK_MT7621 || NET_MEDIATEK_MT7623)
+ select NET_MEDIATEK_MDIO
+
+config NET_MEDIATEK_ESW_RT3050
+ def_tristate NET_MEDIATEK_SOC
+ depends on NET_MEDIATEK_RT3050
+
+config NET_MEDIATEK_GSW_MT7620
+ def_tristate NET_MEDIATEK_SOC
+ depends on NET_MEDIATEK_MT7620
+
+config NET_MEDIATEK_GSW_MT7621
+ def_tristate NET_MEDIATEK_SOC
+ depends on NET_MEDIATEK_MT7621
+
+config NET_MEDIATEK_GSW_MT7623
+ def_tristate NET_MEDIATEK_SOC
+ depends on NET_MEDIATEK_MT7623
+endif
diff --git a/drivers/net/ethernet/mediatek/Makefile b/drivers/net/ethernet/mediatek/Makefile
new file mode 100644
index 0000000..d9a161d
--- /dev/null
+++ b/drivers/net/ethernet/mediatek/Makefile
@@ -0,0 +1,23 @@
+#
+# Makefile for the Ralink SoCs built-in ethernet macs
+#
+
+mtk-eth-soc-y += mtk_eth_soc.o ethtool.o
+
+mtk-eth-soc-$(CONFIG_NET_MEDIATEK_MDIO) += mdio.o
+mtk-eth-soc-$(CONFIG_NET_MEDIATEK_MDIO_RT2880) += mdio_rt2880.o
+mtk-eth-soc-$(CONFIG_NET_MEDIATEK_MDIO_MT7620) += mdio_mt7620.o
+
+mtk-eth-soc-$(CONFIG_NET_MEDIATEK_RT2880) += soc_rt2880.o
+mtk-eth-soc-$(CONFIG_NET_MEDIATEK_RT3050) += soc_rt3050.o
+mtk-eth-soc-$(CONFIG_NET_MEDIATEK_RT3883) += soc_rt3883.o
+mtk-eth-soc-$(CONFIG_NET_MEDIATEK_MT7620) += soc_mt7620.o
+mtk-eth-soc-$(CONFIG_NET_MEDIATEK_MT7621) += soc_mt7621.o
+mtk-eth-soc-$(CONFIG_NET_MEDIATEK_MT7623) += soc_mt7623.o
+
+obj-$(CONFIG_NET_MEDIATEK_ESW_RT3050) += esw_rt3050.o
+obj-$(CONFIG_NET_MEDIATEK_GSW_MT7620) += gsw_mt7620.o
+obj-$(CONFIG_NET_MEDIATEK_GSW_MT7621) += gsw_mt7621.o
+obj-$(CONFIG_NET_MEDIATEK_GSW_MT7623) += gsw_mt7623.o
+
+obj-$(CONFIG_NET_MEDIATEK_SOC) += mtk-eth-soc.o
--
1.7.10.4
next prev parent reply other threads:[~2016-02-26 14:22 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-26 14:21 [PATCH V2 00/12] net-next: mediatek: add ethernet driver John Crispin
2016-02-26 14:21 ` [PATCH V2 01/12] net-next: mediatek: Document ralink/mediatek SoC ethernet binding John Crispin
2016-03-02 18:46 ` Rob Herring
2016-03-02 18:49 ` John Crispin
2016-02-26 14:21 ` [PATCH V2 02/12] net-next: mediatek: add the drivers core files John Crispin
2016-02-26 14:21 ` [PATCH V2 03/12] net-next: mediatek: add embedded switch driver (ESW) John Crispin
2016-02-26 15:18 ` Andrew Lunn
2016-02-26 15:24 ` John Crispin
2016-02-26 17:05 ` Andrew Lunn
2016-02-26 17:44 ` David Miller
2016-02-26 17:36 ` David Miller
2016-02-26 18:34 ` Florian Fainelli
2016-02-26 16:25 ` Felix Fietkau
2016-02-26 17:29 ` Andrew Lunn
2016-02-26 17:43 ` David Miller
2016-02-26 17:35 ` David Miller
2016-02-26 14:21 ` [PATCH V2 04/12] net-next: mediatek: add gigabit switch driver (GSW) John Crispin
2016-02-26 14:21 ` [PATCH V2 05/12] net-next: mediatek: add support for rt2880 John Crispin
2016-02-26 14:21 ` [PATCH V2 06/12] net-next: mediatek: add support for rt3050 John Crispin
2016-02-26 14:21 ` [PATCH V2 07/12] net-next: mediatek: add support for rt3883 John Crispin
2016-02-26 14:21 ` [PATCH V2 08/12] net-next: mediatek: add support for mt7620 John Crispin
2016-02-26 14:21 ` [PATCH V2 09/12] net-next: mediatek: add support for mt7621 John Crispin
2016-02-26 14:21 ` [PATCH V2 10/12] net-next: mediatek: add support for mt7623 John Crispin
2016-02-26 14:21 ` John Crispin [this message]
2016-02-27 3:29 ` [PATCH V2 11/12] net-next: mediatek: add Kconfig and Makefile kbuild test robot
2016-02-26 14:21 ` [PATCH V2 12/12] net-next: mediatek: add an entry to MAINTAINERS John Crispin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1456496504-50429-12-git-send-email-blogic@openwrt.org \
--to=blogic@openwrt.org \
--cc=Carlos.Huang@mediatek.com \
--cc=Fred.Chang@mediatek.com \
--cc=davem@davemloft.net \
--cc=igvtee@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=nbd@openwrt.org \
--cc=netdev@vger.kernel.org \
--cc=steven.liu@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®