From: Andy Yan <andy.yan@rock-chips.com>
To: robh+dt@kernel.org, john.stultz@linaro.org, arnd@arndb.de,
heiko@sntech.de
Cc: pawel.moll@arm.com, mark.rutland@arm.com,
ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
catalin.marinas@arm.com, olof@lixom.net,
alexandre.belloni@free-electrons.com, dbaryshkov@gmail.com,
sre@kernel.org, jun.nie@linaro.org, edubezval@gmail.com,
f.fainelli@gmail.com, will.deacon@arm.com,
linux-rockchip@lists.infradead.org, wxt@rock-chips.com,
matthias.bgg@gmail.com, linux@arm.linux.org.uk,
lorenzo.pieralisi@arm.com, moritz.fischer@ettus.com,
richard@nod.at, dwmw2@infradead.org,
Andy Yan <andy.yan@rock-chips.com>
Subject: [PATCH v4 3/4] ARM: dts: rockchip: add syscon-reboot-mode DT node
Date: Tue, 1 Mar 2016 20:12:59 +0800 [thread overview]
Message-ID: <1456834379-5571-1-git-send-email-andy.yan@rock-chips.com> (raw)
In-Reply-To: <1456834172-5425-1-git-send-email-andy.yan@rock-chips.com>
Rockchip platform use a SYSCON mapped register store
the reboot mode magic value for bootloader to use when
system reboot. So add syscon-reboot-mode driver DT node
for rk3xxx,rk3036, rk3288 platform
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
---
Changes in v4: None
Changes in v3:
- descirbe all reboot mode as property instead of subnode
- add rk3036 support
Changes in v2:
- make this node as a subnode of PMU
Changes in v1:
- correct the maskrom magic number
- use macro defined in rockchip_boot-mode.h for reboot-mode DT node
arch/arm/boot/dts/rk3036.dtsi | 11 +++++++++-
arch/arm/boot/dts/rk3288.dtsi | 10 ++++++++++
arch/arm/boot/dts/rk3xxx.dtsi | 12 ++++++++++-
include/dt-bindings/soc/rockchip_boot-mode.h | 30 ++++++++++++++++++++++++++++
4 files changed, 61 insertions(+), 2 deletions(-)
create mode 100644 include/dt-bindings/soc/rockchip_boot-mode.h
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index b9567c1..a4a1773 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -43,6 +43,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/clock/rk3036-cru.h>
+#include <dt-bindings/soc/rockchip_boot-mode.h>
#include "skeleton.dtsi"
/ {
@@ -261,8 +262,16 @@
};
grf: syscon@20008000 {
- compatible = "rockchip,rk3036-grf", "syscon";
+ compatible = "rockchip,rk3036-grf", "syscon", "simple-mfd";
reg = <0x20008000 0x1000>;
+ reboot-mode {
+ compatible = "syscon-reboot-mode";
+ offset = <0x1d8>;
+ mode-normal = <BOOT_NORMAL>;
+ mode-recovery = <BOOT_RECOVERY>;
+ mode-bootloader = <BOOT_FASTBOOT>;
+ mode-loader = <BOOT_LOADER>;
+ };
};
acodec: acodec-ana@20030000 {
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 8ac49f3..977b188 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -45,6 +45,7 @@
#include <dt-bindings/clock/rk3288-cru.h>
#include <dt-bindings/thermal/thermal.h>
#include <dt-bindings/power/rk3288-power.h>
+#include <dt-bindings/soc/rockchip_boot-mode.h>
#include "skeleton.dtsi"
/ {
@@ -713,6 +714,15 @@
clocks = <&cru ACLK_GPU>;
};
};
+
+ reboot-mode {
+ compatible = "syscon-reboot-mode";
+ offset = <0x94>;
+ mode-normal = <BOOT_NORMAL>;
+ mode-recovery = <BOOT_RECOVERY>;
+ mode-bootloader = <BOOT_FASTBOOT>;
+ mode-loader = <BOOT_LOADER>;
+ };
};
sgrf: syscon@ff740000 {
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index 99eeea7..b00d94c 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -43,6 +43,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/rockchip_boot-mode.h>
#include "skeleton.dtsi"
/ {
@@ -243,8 +244,17 @@
};
pmu: pmu@20004000 {
- compatible = "rockchip,rk3066-pmu", "syscon";
+ compatible = "rockchip,rk3066-pmu", "syscon", "simple-mfd";
reg = <0x20004000 0x100>;
+
+ reboot-mode {
+ compatible = "syscon-reboot-mode";
+ offset = <0x40>;
+ mode-normal = <BOOT_NORMAL>;
+ mode-recovery = <BOOT_RECOVERY>;
+ mode-bootloader = <BOOT_FASTBOOT>;
+ mode-loader = <BOOT_LOADER>;
+ };
};
grf: grf@20008000 {
diff --git a/include/dt-bindings/soc/rockchip_boot-mode.h b/include/dt-bindings/soc/rockchip_boot-mode.h
new file mode 100644
index 0000000..eedf113
--- /dev/null
+++ b/include/dt-bindings/soc/rockchip_boot-mode.h
@@ -0,0 +1,30 @@
+#ifndef __ROCKCHIP_BOOT_MODE_H
+#define __ROCKCHIP_BOOT_MODE_H
+
+/*high 24 bits is tag, low 8 bits is type*/
+#define REBOOT_FLAG 0x5242C300
+/* normal boot */
+#define BOOT_NORMAL (REBOOT_FLAG + 0)
+/* enter loader rockusb mode */
+#define BOOT_LOADER (REBOOT_FLAG + 1)
+/* enter maskrom rockusb mode */
+#define BOOT_MASKROM (0xEF08A53C)
+/* enter recovery */
+#define BOOT_RECOVERY (REBOOT_FLAG + 3)
+/* do not enter recover */
+#define BOOT_NORECOVER (REBOOT_FLAG + 4)
+/* boot second OS*/
+#define BOOT_SECONDOS (REBOOT_FLAG + 5)
+/* enter recover and wipe data. */
+#define BOOT_WIPEDATA (REBOOT_FLAG + 6)
+/* enter recover and wipe all data. */
+#define BOOT_WIPEALL (REBOOT_FLAG + 7)
+/* check firmware img with backup part*/
+#define BOOT_CHECKIMG (REBOOT_FLAG + 8)
+ /* enter fast boot mode */
+#define BOOT_FASTBOOT (REBOOT_FLAG + 9)
+#define BOOT_SECUREBOOT_DISABLE (REBOOT_FLAG + 10)
+/* enter charge mode */
+#define BOOT_CHARGING (REBOOT_FLAG + 11)
+
+#endif
--
1.9.1
next prev parent reply other threads:[~2016-03-01 12:13 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-01 12:09 [PATCH v4 0/4] add reboot mode driver Andy Yan
2016-03-01 12:11 ` [PATCH v4 1/4] dt-bindings: power: reset: add document for reboot-mode driver Andy Yan
2016-03-01 12:12 ` [PATCH v4 2/4] power: reset: add reboot mode driver Andy Yan
2016-03-01 18:29 ` John Stultz
2016-03-01 12:12 ` Andy Yan [this message]
2016-03-01 12:14 ` [PATCH v4 4/4] ARM64: dts: rockchip: add syscon-reboot-mode DT node Andy Yan
2016-03-03 1:52 ` [PATCH v4 0/4] add reboot mode driver Caesar Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1456834379-5571-1-git-send-email-andy.yan@rock-chips.com \
--to=andy.yan@rock-chips.com \
--cc=alexandre.belloni@free-electrons.com \
--cc=arnd@arndb.de \
--cc=catalin.marinas@arm.com \
--cc=dbaryshkov@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=edubezval@gmail.com \
--cc=f.fainelli@gmail.com \
--cc=galak@codeaurora.org \
--cc=heiko@sntech.de \
--cc=ijc+devicetree@hellion.org.uk \
--cc=john.stultz@linaro.org \
--cc=jun.nie@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux@arm.linux.org.uk \
--cc=lorenzo.pieralisi@arm.com \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=moritz.fischer@ettus.com \
--cc=olof@lixom.net \
--cc=pawel.moll@arm.com \
--cc=richard@nod.at \
--cc=robh+dt@kernel.org \
--cc=sre@kernel.org \
--cc=will.deacon@arm.com \
--cc=wxt@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®