mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Hans Westgaard Ry <hans.westgaard.ry@oracle.com>
To: unlisted-recipients:; (no To-header on input)
Cc: Hans Westgaard Ry <hans.westgaard.ry@oracle.com>,
	Doug Ledford <dledford@redhat.com>,
	Sean Hefty <sean.hefty@intel.com>,
	Hal Rosenstock <hal.rosenstock@gmail.com>,
	Christoph Lameter <cl@linux.com>,
	Erez Shitrit <erezsh@mellanox.com>,
	Or Gerlitz <ogerlitz@mellanox.com>,
	Bart Van Assche <bart.vanassche@sandisk.com>,
	Yuval Shaia <yuval.shaia@oracle.com>,
	"Haakon Bugge" <haakon.bugge@oracle.com>,
	"Wei Lin Guay" <wei.lin.guay@oracle.com>,
	Chuck Lever <chuck.lever@oracle.com>,
	Jason Gunthorpe <jgunthorpe@obsidianresearch.com>,
	Haggai Eran <haggaie@mellanox.com>,
	Matan Barak <matanb@mellanox.com>,
	linux-rdma@vger.kernel.org (open list:INFINIBAND SUBSYSTEM),
	linux-kernel@vger.kernel.org (open list)
Subject: [PATCH v2] IB/ipoib: Add handling for sending of skb with many frags
Date: Wed,  2 Mar 2016 13:44:28 +0100	[thread overview]
Message-ID: <1456922668-24956-1-git-send-email-hans.westgaard.ry@oracle.com> (raw)
In-Reply-To: <1455784674-8412-1-git-send-email-hans.westgaard.ry@oracle.com>

IPoIB converts skb-fragments to sge adding 1 extra sge when SG is enabled.
Current codepath assumes that the max number of sge a device support
is at least MAX_SKB_FRAGS+1, there is no interaction with upper layers
to limit number of fragments in an skb if a device suports fewer
sges. The assumptions also lead to requesting a fixed number of sge
when IPoIB creates queue-pairs with SG enabled.

A fallback/slowpath is implemented using skb_linearize to
handle cases where the conversion would result in more sges than supported.

Signed-off-by: Hans Westgaard Ry <hans.westgaard.ry@oracle.com>
Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Wei Lin Guay <wei.lin.guay@oracle.com>
---
 drivers/infiniband/ulp/ipoib/ipoib.h       |  2 ++
 drivers/infiniband/ulp/ipoib/ipoib_cm.c    | 23 +++++++++++++++++++++--
 drivers/infiniband/ulp/ipoib/ipoib_ib.c    | 18 ++++++++++++++++++
 drivers/infiniband/ulp/ipoib/ipoib_verbs.c |  5 ++++-
 4 files changed, 45 insertions(+), 3 deletions(-)

diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h
index a6f3eab..85be0de 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib.h
+++ b/drivers/infiniband/ulp/ipoib/ipoib.h
@@ -244,6 +244,7 @@ struct ipoib_cm_tx {
 	unsigned	     tx_tail;
 	unsigned long	     flags;
 	u32		     mtu;
+	unsigned             max_send_sge;
 };
 
 struct ipoib_cm_rx_buf {
@@ -390,6 +391,7 @@ struct ipoib_dev_priv {
 	int	hca_caps;
 	struct ipoib_ethtool_st ethtool;
 	struct timer_list poll_timer;
+	unsigned max_send_sge;
 };
 
 struct ipoib_ah {
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
index 917e46e..c8ed535 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
@@ -710,6 +710,7 @@ void ipoib_cm_send(struct net_device *dev, struct sk_buff *skb, struct ipoib_cm_
 	struct ipoib_dev_priv *priv = netdev_priv(dev);
 	struct ipoib_tx_buf *tx_req;
 	int rc;
+	unsigned usable_sge = tx->max_send_sge - !!skb_headlen(skb);
 
 	if (unlikely(skb->len > tx->mtu)) {
 		ipoib_warn(priv, "packet len %d (> %d) too long to send, dropping\n",
@@ -719,7 +720,23 @@ void ipoib_cm_send(struct net_device *dev, struct sk_buff *skb, struct ipoib_cm_
 		ipoib_cm_skb_too_long(dev, skb, tx->mtu - IPOIB_ENCAP_LEN);
 		return;
 	}
-
+	if (skb_shinfo(skb)->nr_frags > usable_sge) {
+		if (skb_linearize(skb) < 0) {
+			ipoib_warn(priv, "skb could not be linearized\n");
+			++dev->stats.tx_dropped;
+			++dev->stats.tx_errors;
+			dev_kfree_skb_any(skb);
+			return;
+		}
+		/* Does skb_linearize return ok without reducing nr_frags? */
+		if (skb_shinfo(skb)->nr_frags > usable_sge) {
+			ipoib_warn(priv, "too many frags after skb linearize\n");
+			++dev->stats.tx_dropped;
+			++dev->stats.tx_errors;
+			dev_kfree_skb_any(skb);
+			return;
+		}
+	}
 	ipoib_dbg_data(priv, "sending packet: head 0x%x length %d connection 0x%x\n",
 		       tx->tx_head, skb->len, tx->qp->qp_num);
 
@@ -1031,7 +1048,8 @@ static struct ib_qp *ipoib_cm_create_tx_qp(struct net_device *dev, struct ipoib_
 	struct ib_qp *tx_qp;
 
 	if (dev->features & NETIF_F_SG)
-		attr.cap.max_send_sge = MAX_SKB_FRAGS + 1;
+		attr.cap.max_send_sge =
+			min_t(u32, priv->ca->attrs.max_sge, MAX_SKB_FRAGS + 1);
 
 	tx_qp = ib_create_qp(priv->pd, &attr);
 	if (PTR_ERR(tx_qp) == -EINVAL) {
@@ -1040,6 +1058,7 @@ static struct ib_qp *ipoib_cm_create_tx_qp(struct net_device *dev, struct ipoib_
 		attr.create_flags &= ~IB_QP_CREATE_USE_GFP_NOIO;
 		tx_qp = ib_create_qp(priv->pd, &attr);
 	}
+	tx->max_send_sge = attr.cap.max_send_sge;
 	return tx_qp;
 }
 
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
index 5ea0c14..ee7a555 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
@@ -540,6 +540,7 @@ void ipoib_send(struct net_device *dev, struct sk_buff *skb,
 	struct ipoib_tx_buf *tx_req;
 	int hlen, rc;
 	void *phead;
+	unsigned usable_sge = priv->max_send_sge - !!skb_headlen(skb);
 
 	if (skb_is_gso(skb)) {
 		hlen = skb_transport_offset(skb) + tcp_hdrlen(skb);
@@ -563,6 +564,23 @@ void ipoib_send(struct net_device *dev, struct sk_buff *skb,
 		phead = NULL;
 		hlen  = 0;
 	}
+	if (skb_shinfo(skb)->nr_frags > usable_sge) {
+		if (skb_linearize(skb) < 0) {
+			ipoib_warn(priv, "skb could not be linearized\n");
+			++dev->stats.tx_dropped;
+			++dev->stats.tx_errors;
+			dev_kfree_skb_any(skb);
+			return;
+		}
+		/* Does skb_linearize return ok without reducing nr_frags? */
+		if (skb_shinfo(skb)->nr_frags > usable_sge) {
+			ipoib_warn(priv, "too many frags after skb linearize\n");
+			++dev->stats.tx_dropped;
+			++dev->stats.tx_errors;
+			dev_kfree_skb_any(skb);
+			return;
+		}
+	}
 
 	ipoib_dbg_data(priv, "sending packet, length=%d address=%p qpn=0x%06x\n",
 		       skb->len, address, qpn);
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c
index d48c5ba..b809c37 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c
@@ -206,7 +206,8 @@ int ipoib_transport_dev_init(struct net_device *dev, struct ib_device *ca)
 		init_attr.create_flags |= IB_QP_CREATE_NETIF_QP;
 
 	if (dev->features & NETIF_F_SG)
-		init_attr.cap.max_send_sge = MAX_SKB_FRAGS + 1;
+		init_attr.cap.max_send_sge =
+			min_t(u32, priv->ca->attrs.max_sge, MAX_SKB_FRAGS + 1);
 
 	priv->qp = ib_create_qp(priv->pd, &init_attr);
 	if (IS_ERR(priv->qp)) {
@@ -233,6 +234,8 @@ int ipoib_transport_dev_init(struct net_device *dev, struct ib_device *ca)
 	priv->rx_wr.next = NULL;
 	priv->rx_wr.sg_list = priv->rx_sge;
 
+	priv->max_send_sge = init_attr.cap.max_send_sge;
+
 	return 0;
 
 out_free_send_cq:
-- 
2.4.3

  reply	other threads:[~2016-03-02 12:45 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-18  8:37 [PATCH] IB/ipoib: Add handling " Hans Westgaard Ry
2016-03-02 12:44 ` Hans Westgaard Ry [this message]
2016-03-03 15:11   ` [PATCH v2] IB/ipoib: Add handling for sending " Doug Ledford

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1456922668-24956-1-git-send-email-hans.westgaard.ry@oracle.com \
    --to=hans.westgaard.ry@oracle.com \
    --cc=bart.vanassche@sandisk.com \
    --cc=chuck.lever@oracle.com \
    --cc=cl@linux.com \
    --cc=dledford@redhat.com \
    --cc=erezsh@mellanox.com \
    --cc=haakon.bugge@oracle.com \
    --cc=haggaie@mellanox.com \
    --cc=hal.rosenstock@gmail.com \
    --cc=jgunthorpe@obsidianresearch.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rdma@vger.kernel.org \
    --cc=matanb@mellanox.com \
    --cc=ogerlitz@mellanox.com \
    --cc=sean.hefty@intel.com \
    --cc=wei.lin.guay@oracle.com \
    --cc=yuval.shaia@oracle.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®