From: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
To: <pbonzini@redhat.com>, <rkrcmar@redhat.com>, <joro@8bytes.org>,
<bp@alien8.de>, <gleb@kernel.org>, <alex.williamson@redhat.com>
Cc: <kvm@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<wei@redhat.com>, <sherry.hurwitz@amd.com>,
Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>,
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Subject: [PART1 RFC v2 06/10] svm: Add interrupt injection via AVIC
Date: Fri, 4 Mar 2016 14:46:04 -0600 [thread overview]
Message-ID: <1457124368-2025-7-git-send-email-Suravee.Suthikulpanit@amd.com> (raw)
In-Reply-To: <1457124368-2025-1-git-send-email-Suravee.Suthikulpanit@amd.com>
This patch introduces a new mechanism to inject interrupt using AVIC.
Since VINTR is not supported when enable AVIC, we need to inject
interrupt via APIC backing page instead.
This patch also adds support for AVIC doorbell, which is used by
KVM to signal a running vcpu to check IRR for injected interrupts.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
arch/x86/kvm/svm.c | 35 ++++++++++++++++++++++++++++++++---
1 file changed, 32 insertions(+), 3 deletions(-)
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index c703149..8f11200 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -71,6 +71,8 @@ MODULE_DEVICE_TABLE(x86cpu, svm_cpu_id);
#define SVM_FEATURE_DECODE_ASSIST (1 << 7)
#define SVM_FEATURE_PAUSE_FILTER (1 << 10)
+#define SVM_AVIC_DOORBELL 0xc001011b
+
#define NESTED_EXIT_HOST 0 /* Exit handled on host level */
#define NESTED_EXIT_DONE 1 /* Exit caused nested vmexit */
#define NESTED_EXIT_CONTINUE 2 /* Further checks needed */
@@ -236,6 +238,8 @@ static bool npt_enabled = true;
static bool npt_enabled;
#endif
+static struct kvm_x86_ops svm_x86_ops;
+
/* allow nested paging (virtualized MMU) for all guests */
static int npt = true;
module_param(npt, int, S_IRUGO);
@@ -978,6 +982,8 @@ static __init int svm_hardware_setup(void)
if (avic) {
printk(KERN_INFO "kvm: AVIC enabled\n");
+ } else {
+ svm_x86_ops.deliver_posted_interrupt = NULL;
}
return 0;
@@ -3071,8 +3077,10 @@ static int clgi_interception(struct vcpu_svm *svm)
disable_gif(svm);
/* After a CLGI no interrupts should come */
- svm_clear_vintr(svm);
- svm->vmcb->control.v_irq = 0;
+ if (!avic) {
+ svm_clear_vintr(svm);
+ svm->vmcb->control.v_irq = 0;
+ }
mark_dirty(svm->vmcb, VMCB_INTR);
@@ -3647,6 +3655,9 @@ static int msr_interception(struct vcpu_svm *svm)
static int interrupt_window_interception(struct vcpu_svm *svm)
{
+ if (avic)
+ BUG();
+
kvm_make_request(KVM_REQ_EVENT, &svm->vcpu);
svm_clear_vintr(svm);
svm->vmcb->control.v_irq = 0;
@@ -3961,7 +3972,7 @@ static inline void svm_inject_irq(struct vcpu_svm *svm, int irq)
{
struct vmcb_control_area *control;
-
+ /* The following fields are ignored when AVIC is enabled */
control = &svm->vmcb->control;
control->int_vector = irq;
control->v_intr_prio = 0xf;
@@ -4042,6 +4053,20 @@ static void svm_sync_pir_to_irr(struct kvm_vcpu *vcpu)
return;
}
+static void svm_deliver_avic_intr(struct kvm_vcpu *vcpu, int vec)
+{
+ struct vcpu_svm *svm = to_svm(vcpu);
+
+ kvm_lapic_set_vector(vec, avic_get_bk_page_entry(svm, APIC_IRR));
+
+ if (vcpu->mode == IN_GUEST_MODE) {
+ wrmsrl(SVM_AVIC_DOORBELL,
+ __default_cpu_present_to_apicid(vcpu->cpu));
+ } else {
+ kvm_vcpu_kick(vcpu);
+ }
+}
+
static int svm_nmi_allowed(struct kvm_vcpu *vcpu)
{
struct vcpu_svm *svm = to_svm(vcpu);
@@ -4102,6 +4127,9 @@ static void enable_irq_window(struct kvm_vcpu *vcpu)
* get that intercept, this function will be called again though and
* we'll get the vintr intercept.
*/
+ if (avic)
+ return;
+
if (gif_set(svm) && nested_svm_intr(svm)) {
svm_set_vintr(svm);
svm_inject_irq(svm, 0x0);
@@ -4834,6 +4862,7 @@ static struct kvm_x86_ops svm_x86_ops = {
.sched_in = svm_sched_in,
.pmu_ops = &amd_pmu_ops,
+ .deliver_posted_interrupt = svm_deliver_avic_intr,
};
static int __init svm_init(void)
--
1.9.1
next prev parent reply other threads:[~2016-03-04 20:49 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-04 20:45 [PART1 RFC v2 00/10] KVM: x86: Introduce SVM AVIC support Suravee Suthikulpanit
2016-03-04 20:45 ` [PART1 RFC v2 01/10] KVM: x86: Misc LAPIC changes to exposes helper functions Suravee Suthikulpanit
2016-03-04 20:46 ` [PART1 RFC v2 02/10] KVM: x86: Introducing kvm_x86_ops VCPU blocking/unblocking Suravee Suthikulpanit
2016-03-07 15:42 ` Paolo Bonzini
2016-03-14 6:19 ` Suravee Suthikulpanit
2016-03-04 20:46 ` [PART1 RFC v2 03/10] svm: Introduce new AVIC VMCB registers Suravee Suthikulpanit
2016-03-07 15:44 ` Paolo Bonzini
2016-03-14 7:41 ` Suravee Suthikulpanit
2016-03-14 12:25 ` Paolo Bonzini
2016-03-15 12:51 ` Suravee Suthikulpanit
2016-03-04 20:46 ` [PART1 RFC v2 04/10] svm: clean up V_TPR, V_IRQ, V_INTR_PRIO, and V_INTR_MASKING Suravee Suthikulpanit
2016-03-04 20:46 ` [PART1 RFC v2 05/10] KVM: x86: Detect and Initialize AVIC support Suravee Suthikulpanit
2016-03-07 16:41 ` Paolo Bonzini
2016-03-15 17:09 ` Suravee Suthikulpanit
2016-03-15 17:22 ` Paolo Bonzini
2016-03-16 6:22 ` Suravee Suthikulpanit
2016-03-16 7:20 ` Paolo Bonzini
2016-03-16 8:21 ` Suravee Suthikulpanit
2016-03-16 11:12 ` Paolo Bonzini
2016-03-04 20:46 ` Suravee Suthikulpanit [this message]
2016-03-07 15:36 ` [PART1 RFC v2 06/10] svm: Add interrupt injection via AVIC Paolo Bonzini
2016-03-08 21:54 ` Radim Krčmář
2016-03-09 11:10 ` Paolo Bonzini
2016-03-09 16:00 ` Radim Krčmář
2016-03-14 9:41 ` Suravee Suthikulpanit
2016-03-14 12:27 ` Paolo Bonzini
2016-03-14 9:50 ` Suravee Suthikulpanit
2016-03-14 5:25 ` Suravee Suthikulpanit
2016-03-14 8:54 ` Suravee Suthikulpanit
2016-03-04 20:46 ` [PART1 RFC v2 07/10] svm: Add VMEXIT handlers for AVIC Suravee Suthikulpanit
2016-03-07 15:58 ` Paolo Bonzini
2016-03-08 22:05 ` Radim Krčmář
2016-03-09 10:56 ` Paolo Bonzini
2016-03-09 20:55 ` Radim Krčmář
2016-03-10 19:34 ` Radim Krčmář
2016-03-10 19:54 ` Paolo Bonzini
2016-03-10 20:44 ` Radim Krčmář
2016-03-17 3:58 ` Suravee Suthikulpanit
2016-03-17 9:35 ` Paolo Bonzini
2016-03-17 19:44 ` Suravee Suthikulpanit
2016-03-17 20:27 ` [PATCH] KVM: split kvm_vcpu_wake_up from kvm_vcpu_kick Radim Krčmář
2016-03-18 5:13 ` Suravee Suthikulpanit
2016-03-04 20:46 ` [PART1 RFC v2 08/10] svm: Do not expose x2APIC when enable AVIC Suravee Suthikulpanit
2016-03-04 20:46 ` [PART1 RFC v2 09/10] svm: Do not intercept CR8 " Suravee Suthikulpanit
2016-03-07 15:39 ` Paolo Bonzini
2016-03-14 6:09 ` Suravee Suthikulpanit
2016-03-14 12:28 ` Paolo Bonzini
2016-03-04 20:46 ` [PART1 RFC v2 10/10] svm: Manage vcpu load/unload " Suravee Suthikulpanit
2016-03-09 21:46 ` Radim Krčmář
2016-03-10 14:01 ` Radim Krčmář
2016-03-14 11:58 ` Suravee Suthikulpanit
2016-03-14 16:54 ` Radim Krčmář
2016-03-14 11:48 ` Suravee Suthikulpanit
2016-03-14 16:40 ` Radim Krčmář
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1457124368-2025-7-git-send-email-Suravee.Suthikulpanit@amd.com \
--to=suravee.suthikulpanit@amd.com \
--cc=alex.williamson@redhat.com \
--cc=bp@alien8.de \
--cc=gleb@kernel.org \
--cc=joro@8bytes.org \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=rkrcmar@redhat.com \
--cc=sherry.hurwitz@amd.com \
--cc=wei@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®