From: Shawn Lin <shawn.lin@rock-chips.com>
To: Adrian Hunter <adrian.hunter@intel.com>,
Ulf Hansson <ulf.hansson@linaro.org>
Cc: Michal Simek <michal.simek@xilinx.com>,
soren.brinkmann@xilinx.com, Rob Herring <robh+dt@kernel.org>,
linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, Shawn Lin <shawn.lin@rock-chips.com>
Subject: [PATCH v6 2/2] mmc: sdhci-of-arasan: add phy support for sdhci-of-arasan
Date: Sat, 5 Mar 2016 10:24:36 +0800 [thread overview]
Message-ID: <1457144676-30697-1-git-send-email-shawn.lin@rock-chips.com> (raw)
In-Reply-To: <1457144633-30615-1-git-send-email-shawn.lin@rock-chips.com>
This patch adds Generic PHY access for sdhci-of-arasan. Driver
can get PHY handler from dt-binding, and power-on/init the PHY.
Currently, it's just mandatory for arasan,sdhci-5.1.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Serise-changes: 6
- rebase on Ulf's next
- fix some preexisting problems of err handling suggested
by Adrian
Serise-changes: 5
- remove rpm support from this serise
- fix some err case for handling phy
Serise-changes: 4
- remove suspend/resume_phy
- add err handle label for system PM callback
- fix comments of struct sdhci_arasan_data and system PM
callback suggested by Michal
Serise-changes: 3
- remove phy_init/exit for suspend/resume
- adjust phy_int/power_on seq to make code more reasonable
simplify suspend/resume_phy
Serise-changes: 2
- Keep phy as a mandatory requirement for arasan,sdhci-5.1
---
Changes in v6: None
Changes in v2: None
drivers/mmc/host/sdhci-of-arasan.c | 71 +++++++++++++++++++++++++++++++++-----
1 file changed, 63 insertions(+), 8 deletions(-)
diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index 1e4b5e0..2e482b1 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -21,6 +21,7 @@
#include <linux/module.h>
#include <linux/of_device.h>
+#include <linux/phy/phy.h>
#include "sdhci-pltfm.h"
#define SDHCI_ARASAN_CLK_CTRL_OFFSET 0x2c
@@ -32,9 +33,11 @@
/**
* struct sdhci_arasan_data
* @clk_ahb: Pointer to the AHB clock
+ * @phy: Pointer to the generic phy
*/
struct sdhci_arasan_data {
struct clk *clk_ahb;
+ struct phy *phy;
};
static unsigned int sdhci_arasan_get_timeout_clock(struct sdhci_host *host)
@@ -88,6 +91,15 @@ static int sdhci_arasan_suspend(struct device *dev)
if (ret)
return ret;
+ if (!IS_ERR(sdhci_arasan->phy)) {
+ ret = phy_power_off(sdhci_arasan->phy);
+ if (ret) {
+ dev_err(dev, "Cannot power off phy.\n");
+ sdhci_resume_host(host);
+ return ret;
+ }
+ }
+
clk_disable(pltfm_host->clk);
clk_disable(sdhci_arasan->clk_ahb);
@@ -118,10 +130,17 @@ static int sdhci_arasan_resume(struct device *dev)
ret = clk_enable(pltfm_host->clk);
if (ret) {
dev_err(dev, "Cannot enable SD clock.\n");
- clk_disable(sdhci_arasan->clk_ahb);
return ret;
}
+ if (!IS_ERR(sdhci_arasan->phy)) {
+ ret = phy_power_on(sdhci_arasan->phy);
+ if (ret) {
+ dev_err(dev, "Cannot power on phy.\n");
+ return ret;
+ }
+ }
+
return sdhci_resume_host(host);
}
#endif /* ! CONFIG_PM_SLEEP */
@@ -148,19 +167,21 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
sdhci_arasan->clk_ahb = devm_clk_get(&pdev->dev, "clk_ahb");
if (IS_ERR(sdhci_arasan->clk_ahb)) {
dev_err(&pdev->dev, "clk_ahb clock not found.\n");
- return PTR_ERR(sdhci_arasan->clk_ahb);
+ ret = PTR_ERR(sdhci_arasan->clk_ahb);
+ goto err_pltfm_free;
}
clk_xin = devm_clk_get(&pdev->dev, "clk_xin");
if (IS_ERR(clk_xin)) {
dev_err(&pdev->dev, "clk_xin clock not found.\n");
- return PTR_ERR(clk_xin);
+ ret = PTR_ERR(clk_xin);
+ goto err_pltfm_free;
}
ret = clk_prepare_enable(sdhci_arasan->clk_ahb);
if (ret) {
dev_err(&pdev->dev, "Unable to enable AHB clock.\n");
- return ret;
+ goto err_pltfm_free;
}
ret = clk_prepare_enable(clk_xin);
@@ -178,19 +199,48 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
goto clk_disable_all;
}
+ sdhci_arasan->phy = ERR_PTR(-ENODEV);
+ if (of_device_is_compatible(pdev->dev.of_node,
+ "arasan,sdhci-5.1")) {
+ sdhci_arasan->phy = devm_phy_get(&pdev->dev,
+ "phy_arasan");
+ if (IS_ERR(sdhci_arasan->phy)) {
+ ret = PTR_ERR(sdhci_arasan->phy);
+ dev_err(&pdev->dev, "No phy for arasan,sdhci-5.1.\n");
+ goto clk_disable_all;
+ }
+
+ ret = phy_init(sdhci_arasan->phy);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "phy_init err.\n");
+ goto clk_disable_all;
+ }
+
+ ret = phy_power_on(sdhci_arasan->phy);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "phy_power_on err.\n");
+ goto err_phy_power;
+ }
+ }
+
ret = sdhci_add_host(host);
if (ret)
- goto err_pltfm_free;
+ goto err_add_host;
return 0;
-err_pltfm_free:
- sdhci_pltfm_free(pdev);
+err_add_host:
+ if (!IS_ERR(sdhci_arasan->phy))
+ phy_power_off(sdhci_arasan->phy);
+err_phy_power:
+ if (!IS_ERR(sdhci_arasan->phy))
+ phy_exit(sdhci_arasan->phy);
clk_disable_all:
clk_disable_unprepare(clk_xin);
clk_dis_ahb:
clk_disable_unprepare(sdhci_arasan->clk_ahb);
-
+err_pltfm_free:
+ sdhci_pltfm_free(pdev);
return ret;
}
@@ -202,6 +252,11 @@ static int sdhci_arasan_remove(struct platform_device *pdev)
struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host);
struct clk *clk_ahb = sdhci_arasan->clk_ahb;
+ if (!IS_ERR(sdhci_arasan->phy)) {
+ phy_power_off(sdhci_arasan->phy);
+ phy_exit(sdhci_arasan->phy);
+ }
+
ret = sdhci_pltfm_unregister(pdev);
clk_disable_unprepare(clk_ahb);
--
2.3.7
next prev parent reply other threads:[~2016-03-05 2:32 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-05 2:23 [PATCH v6 0/2] Add phy support for arasan,sdhci-5.1 Shawn Lin
2016-03-05 2:24 ` [PATCH v6 1/2] Documentation: bindings: add description of phy for sdhci-of-arasan Shawn Lin
2016-03-05 2:24 ` Shawn Lin [this message]
2016-03-07 12:07 ` [PATCH v6 2/2] mmc: sdhci-of-arasan: add phy support " Adrian Hunter
2016-03-07 12:48 ` Shawn Lin
2016-03-07 13:39 ` Adrian Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1457144676-30697-1-git-send-email-shawn.lin@rock-chips.com \
--to=shawn.lin@rock-chips.com \
--cc=adrian.hunter@intel.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=michal.simek@xilinx.com \
--cc=robh+dt@kernel.org \
--cc=soren.brinkmann@xilinx.com \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®