From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: Tony Lindgren <tony@atomide.com>, <paul@pwsan.com>, <robh+dt@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>, <linux-omap@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH v2 10/10] ARM: DTS: dra7: Add nodes for McASP1/2/4/5/6/7/8
Date: Mon, 7 Mar 2016 17:17:37 +0200 [thread overview]
Message-ID: <1457363857-20797-11-git-send-email-peter.ujfalusi@ti.com> (raw)
In-Reply-To: <1457363857-20797-1-git-send-email-peter.ujfalusi@ti.com>
Add nodes to represent all McASP ports in the dra7 family.
For system consistency use the eDMA for audio operations. sDMA would be
fine for 4/5/6/7/8 since their DAT port is not through L3 interconnect.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
arch/arm/boot/dts/dra7.dtsi | 114 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 114 insertions(+)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 4c192ea8ae29..bb3c94aecdeb 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1466,6 +1466,40 @@
status = "disabled";
};
+ mcasp1: mcasp@48460000 {
+ compatible = "ti,dra7-mcasp-audio";
+ ti,hwmods = "mcasp1";
+ reg = <0x48460000 0x2000>,
+ <0x45800000 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>;
+ dma-names = "tx", "rx";
+ clocks = <&mcasp1_aux_gfclk_mux>, <&mcasp1_ahclkx_mux>,
+ <&mcasp1_ahclkr_mux>;
+ clock-names = "fck", "ahclkx", "ahclkr";
+ status = "disabled";
+ };
+
+ mcasp2: mcasp@48464000 {
+ compatible = "ti,dra7-mcasp-audio";
+ ti,hwmods = "mcasp2";
+ reg = <0x48464000 0x2000>,
+ <0x45c00000 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>;
+ dma-names = "tx", "rx";
+ clocks = <&mcasp2_aux_gfclk_mux>, <&mcasp2_ahclkx_mux>,
+ <&mcasp2_ahclkr_mux>;
+ clock-names = "fck", "ahclkx", "ahclkr";
+ status = "disabled";
+ };
+
mcasp3: mcasp@48468000 {
compatible = "ti,dra7-mcasp-audio";
ti,hwmods = "mcasp3";
@@ -1482,6 +1516,86 @@
status = "disabled";
};
+ mcasp4: mcasp@4846c000 {
+ compatible = "ti,dra7-mcasp-audio";
+ ti,hwmods = "mcasp4";
+ reg = <0x4846c000 0x2000>,
+ <0x48436000 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&edma_xbar 135 1>, <&edma_xbar 134 1>;
+ dma-names = "tx", "rx";
+ clocks = <&mcasp4_aux_gfclk_mux>, <&mcasp4_ahclkx_mux>;
+ clock-names = "fck", "ahclkx";
+ status = "disabled";
+ };
+
+ mcasp5: mcasp@48470000 {
+ compatible = "ti,dra7-mcasp-audio";
+ ti,hwmods = "mcasp5";
+ reg = <0x48470000 0x2000>,
+ <0x4843a000 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&edma_xbar 137 1>, <&edma_xbar 136 1>;
+ dma-names = "tx", "rx";
+ clocks = <&mcasp5_aux_gfclk_mux>, <&mcasp5_ahclkx_mux>;
+ clock-names = "fck", "ahclkx";
+ status = "disabled";
+ };
+
+ mcasp6: mcasp@48474000 {
+ compatible = "ti,dra7-mcasp-audio";
+ ti,hwmods = "mcasp6";
+ reg = <0x48474000 0x2000>,
+ <0x4844c000 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&edma_xbar 139 1>, <&edma_xbar 138 1>;
+ dma-names = "tx", "rx";
+ clocks = <&mcasp6_aux_gfclk_mux>, <&mcasp6_ahclkx_mux>;
+ clock-names = "fck", "ahclkx";
+ status = "disabled";
+ };
+
+ mcasp7: mcasp@48478000 {
+ compatible = "ti,dra7-mcasp-audio";
+ ti,hwmods = "mcasp7";
+ reg = <0x48478000 0x2000>,
+ <0x48450000 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&edma_xbar 141 1>, <&edma_xbar 140 1>;
+ dma-names = "tx", "rx";
+ clocks = <&mcasp7_aux_gfclk_mux>, <&mcasp7_ahclkx_mux>;
+ clock-names = "fck", "ahclkx";
+ status = "disabled";
+ };
+
+ mcasp8: mcasp@4847c000 {
+ compatible = "ti,dra7-mcasp-audio";
+ ti,hwmods = "mcasp8";
+ reg = <0x4847c000 0x2000>,
+ <0x48454000 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&edma_xbar 143 1>, <&edma_xbar 142 1>;
+ dma-names = "tx", "rx";
+ clocks = <&mcasp8_aux_gfclk_mux>, <&mcasp8_ahclkx_mux>;
+ clock-names = "fck", "ahclkx";
+ status = "disabled";
+ };
+
crossbar_mpu: crossbar@4a002a48 {
compatible = "ti,irq-crossbar";
reg = <0x4a002a48 0x130>;
--
2.7.2
next prev parent reply other threads:[~2016-03-07 15:19 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-07 15:17 [PATCH v2 00/10] ARM: DTS/clk: DRA7 family: enable eDMA and audio updates Peter Ujfalusi
2016-03-07 15:17 ` [PATCH v2 01/10] ARM: DTS: dra7: Move the sDMA crossbar node under l4_cfg/scm Peter Ujfalusi
2016-03-07 15:17 ` [PATCH v2 02/10] ARM: DTS: dra7: Enable eDMA Peter Ujfalusi
2016-03-07 15:17 ` [PATCH v2 03/10] ARM: DTS: dra7: Use eDMA and add DAT port address for McASP3 Peter Ujfalusi
2016-03-07 15:17 ` [PATCH v2 04/10] ARM: DTS: dra7-evm: Enable AFIFO use " Peter Ujfalusi
2016-03-07 15:17 ` [PATCH v2 05/10] ARM: DTS: dra72-evm: " Peter Ujfalusi
2016-03-07 15:17 ` [PATCH v2 06/10] ARM: DTS: am57xx-beagle-x15: Move clkout2 source selection to codec node Peter Ujfalusi
2016-03-07 15:17 ` [PATCH v2 07/10] ARM: DTS: am57xx-beagle-x15: Enable AFIFO use for McASP3 Peter Ujfalusi
2016-03-07 15:17 ` [PATCH v2 08/10] ARM: clk: dra7xx: Correct mcasp8_ahclkx_mux name Peter Ujfalusi
2016-03-07 15:17 ` [PATCH v2 09/10] ARM: DRA7: hwmod: Add data for McASP1/2/4/5/6/7/8 Peter Ujfalusi
2016-03-08 6:37 ` Paul Walmsley
2016-03-07 15:17 ` Peter Ujfalusi [this message]
2016-04-11 13:33 ` [PATCH v2 00/10] ARM: DTS/clk: DRA7 family: enable eDMA and audio updates Peter Ujfalusi
2016-04-11 20:06 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1457363857-20797-11-git-send-email-peter.ujfalusi@ti.com \
--to=peter.ujfalusi@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=paul@pwsan.com \
--cc=robh+dt@kernel.org \
--cc=t-kristo@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®