From: Ganapatrao Kulkarni <gkulkarni@caviumnetworks.com>
To: <linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <Will.Deacon@arm.com>,
<catalin.marinas@arm.com>
Cc: <dann.frazier@canonical.com>, <gpkulkarni@gmail.com>
Subject: [PATCH] arm64: Fix the ptep_set_wrprotect() to set PTE_DIRTY if (PTE_DBM && !PTE_RDONLY)
Date: Wed, 9 Mar 2016 10:32:48 +0530 [thread overview]
Message-ID: <1457499768-31176-1-git-send-email-gkulkarni@caviumnetworks.com> (raw)
Commit 2f4b829c625e ("arm64: Add support for hardware updates of the
access and dirty pte bits") introduced support for handling hardware
updates of the access flag and dirty status.
ptep_set_wrprotect is setting PTR_DIRTY if !PTE_RDONLY,
however by design it suppose to set PTE_DIRTY
only if (PTE_DBM && !PTE_RDONLY). This patch addes code to
test and set accordingly.
This patch fixes BUG,
kernel BUG at /build/linux-StrpB2/linux-4.4.0/fs/ext4/inode.c:2394!
Internal error: Oops - BUG: 0 [#1] SMP
on thunderx numa board, when ARM64_HW_AFDBM and NUMA_BALANCING are enabled.
note: this patch is not tested on platform which supports AFDBM.
Signed-off-by: Ganapatrao Kulkarni <gkulkarni@caviumnetworks.com>
---
arch/arm64/include/asm/pgtable.h | 24 ++++++++++++++----------
1 file changed, 14 insertions(+), 10 deletions(-)
diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
index f506086..d396892 100644
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -613,20 +613,24 @@ static inline pmd_t pmdp_get_and_clear(struct mm_struct *mm,
#define __HAVE_ARCH_PTEP_SET_WRPROTECT
static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long address, pte_t *ptep)
{
- pteval_t pteval;
+ pteval_t pteval, pteval2;
unsigned long tmp;
asm volatile("// ptep_set_wrprotect\n"
- " prfm pstl1strm, %2\n"
- "1: ldxr %0, %2\n"
- " tst %0, %4 // check for hw dirty (!PTE_RDONLY)\n"
- " csel %1, %3, xzr, eq // set PTE_DIRTY|PTE_RDONLY if dirty\n"
- " orr %0, %0, %1 // if !dirty, PTE_RDONLY is already set\n"
- " and %0, %0, %5 // clear PTE_WRITE/PTE_DBM\n"
- " stxr %w1, %0, %2\n"
+ " prfm pstl1strm, %3\n"
+ "1: ldxr %0, %3\n"
+ " and %2, %0, %4 //extract bits PTE_WRITE and PTE_RDONLY\n"
+ " cmp %2, %5 // compare wth PTE_WRITE\n"
+ " b.ne 2f\n"
+ " orr %0, %0, %8 // Set PTE_DIRTY if (PTE_DBM && !PTE_RDONLY)\n"
+ "2: tst %0, %6 // check for !PTE_RDONLY\n"
+ " csel %1, %6, xzr, eq // select PTE_RDONLY if !PTE_RDONLY\n"
+ " orr %0, %0, %1 // set PTE_RDONLY if !PTE_RDONLY\n"
+ " and %0, %0, %7 // clear PTE_WRITE/PTE_DBM\n"
+ " stxr %w1, %0, %3\n"
" cbnz %w1, 1b\n"
- : "=&r" (pteval), "=&r" (tmp), "+Q" (pte_val(*ptep))
- : "r" (PTE_DIRTY|PTE_RDONLY), "L" (PTE_RDONLY), "L" (~PTE_WRITE)
+ : "=&r" (pteval), "=&r" (tmp), "=&r" (pteval2), "+Q" (pte_val(*ptep))
+ : "r" (PTE_WRITE|PTE_RDONLY), "r" (PTE_WRITE), "r" (PTE_RDONLY), "L" (~PTE_WRITE), "L" (PTE_DIRTY)
: "cc");
}
--
1.8.1.4
next reply other threads:[~2016-03-09 5:36 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-09 5:02 Ganapatrao Kulkarni [this message]
2016-03-09 10:06 ` Catalin Marinas
2016-03-09 11:47 ` Ganapatrao Kulkarni
2016-03-09 16:03 ` Catalin Marinas
2016-03-09 17:43 ` Ganapatrao Kulkarni
2016-03-10 3:04 ` Ganapatrao Kulkarni
2016-03-10 18:39 ` Catalin Marinas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1457499768-31176-1-git-send-email-gkulkarni@caviumnetworks.com \
--to=gkulkarni@caviumnetworks.com \
--cc=Will.Deacon@arm.com \
--cc=catalin.marinas@arm.com \
--cc=dann.frazier@canonical.com \
--cc=gpkulkarni@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®