From: Caesar Wang <wxt@rock-chips.com>
To: Heiko Stuebner <heiko@sntech.de>,
"David S. Miller" <davem@davemloft.net>,
Rob Herring <robh+dt@kernel.org>
Cc: linux-rockchip@lists.infradead.org, keescook@google.com,
leozwang@google.com, zhengxing <zhengxing@rock-chips.com>,
Caesar Wang <wxt@rock-chips.com>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Russell King <linux@arm.linux.org.uk>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 6/6] ARM: dts: rockchip: add support emac for RK3036
Date: Fri, 11 Mar 2016 18:55:31 +0800 [thread overview]
Message-ID: <1457693731-6966-7-git-send-email-wxt@rock-chips.com> (raw)
In-Reply-To: <1457693731-6966-1-git-send-email-wxt@rock-chips.com>
From: zhengxing <zhengxing@rock-chips.com>
This patch adds the emac device node for rk3036.
We need to let mac clock under the DPLL which is able to provide
the accurate 50MHz what mac_ref need, since that will cause some
unstable things if the cpufreq is working.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
---
arch/arm/boot/dts/rk3036-evb.dts | 23 ++++++++++++++++++++++
arch/arm/boot/dts/rk3036-kylin.dts | 20 +++++++++++++++++++
arch/arm/boot/dts/rk3036.dtsi | 39 ++++++++++++++++++++++++++++++++++++++
3 files changed, 82 insertions(+)
diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts
index 28a0336..d7d3719 100644
--- a/arch/arm/boot/dts/rk3036-evb.dts
+++ b/arch/arm/boot/dts/rk3036-evb.dts
@@ -47,6 +47,17 @@
compatible = "rockchip,rk3036-evb", "rockchip,rk3036";
};
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&rmii_rst>;
+ phy = <&phy0>;
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
&i2c1 {
status = "okay";
@@ -62,3 +73,15 @@
&uart2 {
status = "okay";
};
+
+&pinctrl {
+ pcfg_output_high: pcfg-output-high {
+ output-high;
+ };
+
+ emac {
+ rmii_rst: rmii-rst {
+ rockchip,pins = <2 22 RK_FUNC_GPIO &pcfg_output_high>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts
index eb9c979..ab2744c 100644
--- a/arch/arm/boot/dts/rk3036-kylin.dts
+++ b/arch/arm/boot/dts/rk3036-kylin.dts
@@ -112,6 +112,20 @@
status = "okay";
};
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&rmii_rst>;
+ phy = <&phy0>;
+ phy-reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* PHY_RST */
+ phy-reset-duration = <10>; /* millisecond */
+
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
&emmc {
status = "okay";
};
@@ -383,6 +397,12 @@
};
&pinctrl {
+ emac {
+ rmii_rst: rmii-rst {
+ rockchip,pins = <2 22 RK_FUNC_GPIO &pcfg_pull_default>;
+ };
+ };
+
leds {
led_ctl: led-ctl {
rockchip,pins = <2 30 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index 90faa86..5175a2a 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -223,6 +223,27 @@
status = "disabled";
};
+ emac: ethernet@10200000 {
+ compatible = "rockchip,rk3036-emac", "snps,arc-emac";
+ reg = <0x10200000 0x4000>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ rockchip,grf = <&grf>;
+ clocks = <&cru HCLK_MAC>, <&cru SCLK_MACREF>, <&cru SCLK_MAC>;
+ clock-names = "hclk", "macref", "macclk";
+ /*
+ * Fix the emac parent clock is DPLL instead of APLL.
+ * since that will cause some unstable things if the cpufreq
+ * is working. (e.g: the accurate 50MHz what mac_ref need)
+ */
+ assigned-clocks = <&cru SCLK_MACPLL>;
+ assigned-clock-parents = <&cru PLL_DPLL>;
+ max-speed = <100>;
+ phy-mode = "rmii";
+ status = "disabled";
+ };
+
sdmmc: dwmmc@10214000 {
compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x10214000 0x4000>;
@@ -628,6 +649,24 @@
};
};
+ emac {
+ emac_xfer: emac-xfer {
+ rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_default>, /* crs_dvalid */
+ <2 13 RK_FUNC_1 &pcfg_pull_default>, /* tx_en */
+ <2 14 RK_FUNC_1 &pcfg_pull_default>, /* mac_clk */
+ <2 15 RK_FUNC_1 &pcfg_pull_default>, /* rx_err */
+ <2 16 RK_FUNC_1 &pcfg_pull_default>, /* rxd1 */
+ <2 17 RK_FUNC_1 &pcfg_pull_default>, /* rxd0 */
+ <2 18 RK_FUNC_1 &pcfg_pull_default>, /* txd1 */
+ <2 19 RK_FUNC_1 &pcfg_pull_default>; /* txd0 */
+ };
+
+ emac_mdio: emac-mdio {
+ rockchip,pins = <2 12 RK_FUNC_1 &pcfg_pull_default>, /* mac_md */
+ <2 25 RK_FUNC_1 &pcfg_pull_default>; /* mac_mdclk */
+ };
+ };
+
i2c0 {
i2c0_xfer: i2c0-xfer {
rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>,
--
1.9.1
next prev parent reply other threads:[~2016-03-11 10:59 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-11 10:55 [PATCH 0/6] arc_emac: fixes the emac issues oand cleanup emac drivers Caesar Wang
2016-03-11 10:55 ` [PATCH 1/6] net: arc_emac: make the rockchip emac document more compatible Caesar Wang
2016-03-11 10:55 ` [PATCH 2/6] net: arc_emac: add phy-reset-* are optional for device tree Caesar Wang
2016-03-18 19:21 ` Rob Herring
2016-03-11 10:55 ` [PATCH 3/6] net: arc_emac: support the phy reset for emac driver Caesar Wang
2016-03-11 13:47 ` Sergei Shtylyov
2016-03-11 14:56 ` Heiko Stübner
2016-03-11 14:59 ` Heiko Stübner
2016-03-11 18:35 ` Sergei Shtylyov
2016-03-13 3:57 ` Caesar Wang
2016-03-11 19:22 ` Sergei Shtylyov
2016-03-11 10:55 ` [PATCH 4/6] net: arc: trivial: cleanup the " Caesar Wang
2016-03-11 11:28 ` kbuild test robot
2016-03-11 10:55 ` [PATCH 5/6] clk: rockchip: rk3036: fix and add node id for emac clock Caesar Wang
2016-03-11 11:15 ` Heiko Stübner
2016-03-11 12:01 ` Caesar Wang
2016-03-11 12:28 ` Heiko Stübner
2016-03-11 10:55 ` Caesar Wang [this message]
2016-03-11 13:46 ` [PATCH 0/6] arc_emac: fixes the emac issues oand cleanup emac drivers Sergei Shtylyov
2016-03-11 14:48 ` Caesar Wang
2016-03-11 18:46 ` Sergei Shtylyov
2016-03-13 4:04 ` Caesar Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1457693731-6966-7-git-send-email-wxt@rock-chips.com \
--to=wxt@rock-chips.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=heiko@sntech.de \
--cc=ijc+devicetree@hellion.org.uk \
--cc=keescook@google.com \
--cc=leozwang@google.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=zhengxing@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®