From: Kamal Mostafa <kamal@canonical.com>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org,
kernel-team@lists.ubuntu.com
Cc: Jun Li <jun.li@nxp.com>, Peter Chen <peter.chen@nxp.com>,
Kamal Mostafa <kamal@canonical.com>
Subject: [PATCH 3.19.y-ckt 13/70] usb: chipidea: otg: change workqueue ci_otg as freezable
Date: Wed, 16 Mar 2016 13:05:06 -0700 [thread overview]
Message-ID: <1458158763-9614-14-git-send-email-kamal@canonical.com> (raw)
In-Reply-To: <1458158763-9614-1-git-send-email-kamal@canonical.com>
v3.19.8-ckt17 -stable review patch. If anyone has any objections, please let me know.
---8<------------------------------------------------------------
From: Peter Chen <peter.chen@nxp.com>
commit d144dfea8af7108f613139623e63952ed7e69c0c upstream.
If we use USB ID pin as wakeup source, and there is a USB block
device on this USB OTG (ID) cable, the system will be deadlock
after system resume.
The root cause for this problem is: the workqueue ci_otg may try
to remove hcd before the driver resume has finished, and hcd will
disconnect the device on it, then, it will call device_release_driver,
and holds the device lock "dev->mutex", but it is never unlocked since
it waits workqueue writeback to run to flush the block information, but
the workqueue writeback is freezable, it is not thawed before driver
resume has finished.
When the driver (device: sd 0:0:0:0:) resume goes to dpm_complete, it
tries to get its device lock "dev->mutex", but it can't get it forever,
then the deadlock occurs. Below call stacks show the situation.
So, in order to fix this problem, we need to change workqueue ci_otg
as freezable, then the work item in this workqueue will be run after
driver's resume, this workqueue will not be blocked forever like above
case since the workqueue writeback has been thawed too.
Tested at: i.mx6qdl-sabresd and i.mx6sx-sdb.
[ 555.178869] kworker/u2:13 D c07de74c 0 826 2 0x00000000
[ 555.185310] Workqueue: ci_otg ci_otg_work
[ 555.189353] Backtrace:
[ 555.191849] [<c07de4fc>] (__schedule) from [<c07dec6c>] (schedule+0x48/0xa0)
[ 555.198912] r10:ee471ba0 r9:00000000 r8:00000000 r7:00000002 r6:ee470000 r5:ee471ba4
[ 555.206867] r4:ee470000
[ 555.209453] [<c07dec24>] (schedule) from [<c07e2fc4>] (schedule_timeout+0x15c/0x1e0)
[ 555.217212] r4:7fffffff r3:edc2b000
[ 555.220862] [<c07e2e68>] (schedule_timeout) from [<c07df6c8>] (wait_for_common+0x94/0x144)
[ 555.229140] r8:00000000 r7:00000002 r6:ee470000 r5:ee471ba4 r4:7fffffff
[ 555.235980] [<c07df634>] (wait_for_common) from [<c07df790>] (wait_for_completion+0x18/0x1c)
[ 555.244430] r10:00000001 r9:c0b5563c r8:c0042e48 r7:ef086000 r6:eea4372c r5:ef131b00
[ 555.252383] r4:00000000
[ 555.254970] [<c07df778>] (wait_for_completion) from [<c0043cb8>] (flush_work+0x19c/0x234)
[ 555.263177] [<c0043b1c>] (flush_work) from [<c0043fac>] (flush_delayed_work+0x48/0x4c)
[ 555.271106] r8:ed5b5000 r7:c0b38a3c r6:eea439cc r5:eea4372c r4:eea4372c
[ 555.277958] [<c0043f64>] (flush_delayed_work) from [<c00eae18>] (bdi_unregister+0x84/0xec)
[ 555.286236] r4:eea43520 r3:20000153
[ 555.289885] [<c00ead94>] (bdi_unregister) from [<c02c2154>] (blk_cleanup_queue+0x180/0x29c)
[ 555.298250] r5:eea43808 r4:eea43400
[ 555.301909] [<c02c1fd4>] (blk_cleanup_queue) from [<c0417914>] (__scsi_remove_device+0x48/0xb8)
[ 555.310623] r7:00000000 r6:20000153 r5:ededa950 r4:ededa800
[ 555.316403] [<c04178cc>] (__scsi_remove_device) from [<c0415e90>] (scsi_forget_host+0x64/0x68)
[ 555.325028] r5:ededa800 r4:ed5b5000
[ 555.328689] [<c0415e2c>] (scsi_forget_host) from [<c0409828>] (scsi_remove_host+0x78/0x104)
[ 555.337054] r5:ed5b5068 r4:ed5b5000
[ 555.340709] [<c04097b0>] (scsi_remove_host) from [<c04cdfcc>] (usb_stor_disconnect+0x50/0xb4)
[ 555.349247] r6:ed5b56e4 r5:ed5b5818 r4:ed5b5690 r3:00000008
[ 555.355025] [<c04cdf7c>] (usb_stor_disconnect) from [<c04b3bc8>] (usb_unbind_interface+0x78/0x25c)
[ 555.363997] r8:c13919b4 r7:edd3c000 r6:edd3c020 r5:ee551c68 r4:ee551c00 r3:c04cdf7c
[ 555.371892] [<c04b3b50>] (usb_unbind_interface) from [<c03dc248>] (__device_release_driver+0x8c/0x118)
[ 555.381213] r10:00000001 r9:edd90c00 r8:c13919b4 r7:ee551c68 r6:c0b546e0 r5:c0b5563c
[ 555.389167] r4:edd3c020
[ 555.391752] [<c03dc1bc>] (__device_release_driver) from [<c03dc2fc>] (device_release_driver+0x28/0x34)
[ 555.401071] r5:edd3c020 r4:edd3c054
[ 555.404721] [<c03dc2d4>] (device_release_driver) from [<c03db304>] (bus_remove_device+0xe0/0x110)
[ 555.413607] r5:edd3c020 r4:ef17f04c
[ 555.417253] [<c03db224>] (bus_remove_device) from [<c03d8128>] (device_del+0x114/0x21c)
[ 555.425270] r6:edd3c028 r5:edd3c020 r4:ee551c00 r3:00000000
[ 555.431045] [<c03d8014>] (device_del) from [<c04b1560>] (usb_disable_device+0xa4/0x1e8)
[ 555.439061] r8:edd3c000 r7:eded8000 r6:00000000 r5:00000001 r4:ee551c00
[ 555.445906] [<c04b14bc>] (usb_disable_device) from [<c04a8e54>] (usb_disconnect+0x74/0x224)
[ 555.454271] r9:edd90c00 r8:ee551000 r7:ee551c68 r6:ee551c9c r5:ee551c00 r4:00000001
[ 555.462156] [<c04a8de0>] (usb_disconnect) from [<c04a8fb8>] (usb_disconnect+0x1d8/0x224)
[ 555.470259] r10:00000001 r9:edd90000 r8:ee471e2c r7:ee551468 r6:ee55149c r5:ee551400
[ 555.478213] r4:00000001
[ 555.480797] [<c04a8de0>] (usb_disconnect) from [<c04ae5ec>] (usb_remove_hcd+0xa0/0x1ac)
[ 555.488813] r10:00000001 r9:ee471eb0 r8:00000000 r7:ef3d9500 r6:eded810c r5:eded80b0
[ 555.496765] r4:eded8000
[ 555.499351] [<c04ae54c>] (usb_remove_hcd) from [<c04d4158>] (host_stop+0x28/0x64)
[ 555.506847] r6:eeb50010 r5:eded8000 r4:eeb51010
[ 555.511563] [<c04d4130>] (host_stop) from [<c04d09b8>] (ci_otg_work+0xc4/0x124)
[ 555.518885] r6:00000001 r5:eeb50010 r4:eeb502a0 r3:c04d4130
[ 555.524665] [<c04d08f4>] (ci_otg_work) from [<c00454f0>] (process_one_work+0x194/0x420)
[ 555.532682] r6:ef086000 r5:eeb502a0 r4:edc44480
[ 555.537393] [<c004535c>] (process_one_work) from [<c00457b0>] (worker_thread+0x34/0x514)
[ 555.545496] r10:edc44480 r9:ef086000 r8:c0b1a100 r7:ef086034 r6:00000088 r5:edc44498
[ 555.553450] r4:ef086000
[ 555.556032] [<c004577c>] (worker_thread) from [<c004bab4>] (kthread+0xdc/0xf8)
[ 555.563268] r10:00000000 r9:00000000 r8:00000000 r7:c004577c r6:edc44480 r5:eddc15c0
[ 555.571221] r4:00000000
[ 555.573804] [<c004b9d8>] (kthread) from [<c000fef0>] (ret_from_fork+0x14/0x24)
[ 555.581040] r7:00000000 r6:00000000 r5:c004b9d8 r4:eddc15c0
[ 553.429383] sh D c07de74c 0 694 691 0x00000000
[ 553.435801] Backtrace:
[ 553.438295] [<c07de4fc>] (__schedule) from [<c07dec6c>] (schedule+0x48/0xa0)
[ 553.445358] r10:edd3c054 r9:edd3c078 r8:edddbd50 r7:edcbbc00 r6:c1377c34 r5:60000153
[ 553.453313] r4:eddda000
[ 553.455896] [<c07dec24>] (schedule) from [<c07deff8>] (schedule_preempt_disabled+0x10/0x14)
[ 553.464261] r4:edd3c058 r3:0000000a
[ 553.467910] [<c07defe8>] (schedule_preempt_disabled) from [<c07e0bbc>] (mutex_lock_nested+0x1a0/0x3e8)
[ 553.477254] [<c07e0a1c>] (mutex_lock_nested) from [<c03e927c>] (dpm_complete+0xc0/0x1b0)
[ 553.485358] r10:00561408 r9:edd3c054 r8:c0b4863c r7:edddbd90 r6:c0b485d8 r5:edd3c020
[ 553.493313] r4:edd3c0d0
[ 553.495896] [<c03e91bc>] (dpm_complete) from [<c03e9388>] (dpm_resume_end+0x1c/0x20)
[ 553.503652] r9:00000000 r8:c0b1a9d0 r7:c1334ec0 r6:c1334edc r5:00000003 r4:00000010
[ 553.511544] [<c03e936c>] (dpm_resume_end) from [<c0079894>] (suspend_devices_and_enter+0x158/0x504)
[ 553.520604] r4:00000000 r3:c1334efc
[ 553.524250] [<c007973c>] (suspend_devices_and_enter) from [<c0079e74>] (pm_suspend+0x234/0x2cc)
[ 553.532961] r10:00561408 r9:ed6b7300 r8:00000004 r7:c1334eec r6:00000000 r5:c1334ee8
[ 553.540914] r4:00000003
[ 553.543493] [<c0079c40>] (pm_suspend) from [<c0078a6c>] (state_store+0x6c/0xc0)
[ 555.703684] 7 locks held by kworker/u2:13/826:
[ 555.708140] #0: ("%s""ci_otg"){++++.+}, at: [<c0045484>] process_one_work+0x128/0x420
[ 555.716277] #1: ((&ci->work)){+.+.+.}, at: [<c0045484>] process_one_work+0x128/0x420
[ 555.724317] #2: (usb_bus_list_lock){+.+.+.}, at: [<c04ae5e4>] usb_remove_hcd+0x98/0x1ac
[ 555.732626] #3: (&dev->mutex){......}, at: [<c04a8e28>] usb_disconnect+0x48/0x224
[ 555.740403] #4: (&dev->mutex){......}, at: [<c04a8e28>] usb_disconnect+0x48/0x224
[ 555.748179] #5: (&dev->mutex){......}, at: [<c03dc2f4>] device_release_driver+0x20/0x34
[ 555.756487] #6: (&shost->scan_mutex){+.+.+.}, at: [<c04097d0>] scsi_remove_host+0x20/0x104
Cc: Jun Li <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
drivers/usb/chipidea/otg.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c
index a048b08..92f169c 100644
--- a/drivers/usb/chipidea/otg.c
+++ b/drivers/usb/chipidea/otg.c
@@ -116,7 +116,7 @@ static void ci_otg_work(struct work_struct *work)
int ci_hdrc_otg_init(struct ci_hdrc *ci)
{
INIT_WORK(&ci->work, ci_otg_work);
- ci->wq = create_singlethread_workqueue("ci_otg");
+ ci->wq = create_freezable_workqueue("ci_otg");
if (!ci->wq) {
dev_err(ci->dev, "can't create workqueue\n");
return -ENODEV;
--
2.7.0
next prev parent reply other threads:[~2016-03-16 20:26 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-16 20:04 [3.19.y-ckt stable] Linux v3.19.8-ckt17 stable review Kamal Mostafa
2016-03-16 20:04 ` [PATCH 3.19.y-ckt 01/70] [stable-only] AIO: properly check iovec sizes Kamal Mostafa
2016-03-16 20:04 ` [PATCH 3.19.y-ckt 02/70] Input: aiptek - fix crash on detecting device without endpoints Kamal Mostafa
2016-03-16 20:04 ` [PATCH 3.19.y-ckt 03/70] wext: fix message delay/ordering Kamal Mostafa
2016-03-16 20:04 ` [PATCH 3.19.y-ckt 04/70] cfg80211/wext: fix message ordering Kamal Mostafa
2016-03-16 20:04 ` [PATCH 3.19.y-ckt 05/70] mac80211: fix use of uninitialised values in RX aggregation Kamal Mostafa
2016-03-16 20:04 ` [PATCH 3.19.y-ckt 06/70] libata: fix HDIO_GET_32BIT ioctl Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 07/70] iwlwifi: mvm: inc pending frames counter also when txing non-sta Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 08/70] [media] adv7604: fix tx 5v detect regression Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 09/70] ahci: add new Intel device IDs Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 10/70] ahci: Order SATA device IDs for codename Lewisburg Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 11/70] Adding Intel Lewisburg device IDs for SATA Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 12/70] mac80211: minstrel_ht: set default tx aggregation timeout to 0 Kamal Mostafa
2016-03-16 20:05 ` Kamal Mostafa [this message]
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 14/70] Revert "jffs2: Fix lock acquisition order bug in jffs2_write_begin" Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 15/70] jffs2: Fix page lock / f->sem deadlock Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 16/70] Fix directory hardlinks from deleted directories Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 17/70] iommu/amd: Fix boot warning when device 00:00.0 is not iommu covered Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 18/70] iommu/amd: Apply workaround for ATS write permission check Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 19/70] libata: Align ata_device's id on a cacheline Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 20/70] can: gs_usb: fixed disconnect bug by removing erroneous use of kfree() Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 21/70] vfio: fix ioctl error handling Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 22/70] ALSA: ctl: Fix ioctls for X32 ABI Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 23/70] ALSA: rawmidi: Fix ioctls " Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 24/70] ALSA: timer: Fix broken compat timer user status ioctl Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 25/70] ALSA: timer: Fix ioctls for X32 ABI Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 26/70] cifs: fix out-of-bounds access in lease parsing Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 27/70] CIFS: Fix SMB2+ interim response processing for read requests Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 28/70] Fix cifs_uniqueid_to_ino_t() function for s390x Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 29/70] arm/arm64: KVM: Fix ioctl error handling Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 30/70] ALSA: hdspm: Fix wrong boolean ctl value accesses Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 31/70] ALSA: hdspm: Fix zero-division Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 32/70] ALSA: hdsp: Fix wrong boolean ctl value accesses Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 33/70] USB: qcserial: add Dell Wireless 5809e Gobi 4G HSPA+ (rev3) Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 34/70] USB: cp210x: Add ID for Parrot NMEA GPS Flight Recorder Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 35/70] ASoC: wm8958: Fix enum ctl accesses in a wrong type Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 36/70] ASoC: wm8994: " Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 37/70] ASoC: wm_adsp: " Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 38/70] USB: serial: option: add support for Telit LE922 PID 0x1045 Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 39/70] USB: serial: option: add support for Quectel UC20 Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 40/70] mac80211: Fix Public Action frame RX in AP mode Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 41/70] ALSA: seq: oss: Don't drain at closing a client Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 42/70] drm/ast: Fix incorrect register check for DRAM width Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 43/70] USB: qcserial: add Sierra Wireless EM74xx device ID Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 44/70] drm/radeon/pm: update current crtc info after setting the powerstate Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 45/70] PM / sleep / x86: Fix crash on graph trace through x86 suspend Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 46/70] ALSA: hda - Fix mic issues on Acer Aspire E1-472 Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 47/70] ovl: fix getcwd() failure after unsuccessful rmdir Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 48/70] ovl: copy new uid/gid into overlayfs runtime inode Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 49/70] MIPS: traps: Fix SIGFPE information leak from `do_ov' and `do_trap_or_bp' Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 50/70] ubi: Fix out of bounds write in volume update code Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 51/70] target: Drop incorrect ABORT_TASK put for completed commands Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 52/70] ARM: OMAP2+: hwmod: Introduce ti,no-idle dt property Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 53/70] ARM: dts: dra7: do not gate cpsw clock due to errata i877 Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 54/70] Revert "drm/radeon: call hpd_irq_event on resume" Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 55/70] KVM: PPC: Book3S HV: Sanitize special-purpose register values on guest exit Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 56/70] jffs2: reduce the breakage on recovery from halfway failed rename() Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 57/70] KVM: VMX: disable PEBS before a guest entry Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 58/70] tracing: Fix check for cpu online when event is disabled Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 59/70] KVM: MMU: fix ept=0/pte.u=1/pte.w=0/CR0.WP=0/CR4.SMEP=1/EFER.NX=0 combo Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 60/70] MIPS: Fix build error when SMP is used without GIC Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 61/70] gpio: rcar: Add Runtime PM handling for interrupts Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 62/70] tcp: convert cached rtt from usec to jiffies when feeding initial rto Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 63/70] ext4: iterate over buffer heads correctly in move_extent_per_page() Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 64/70] net/mlx4_core: Allow resetting VF admin mac to zero Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 65/70] ipv6: re-enable fragment header matching in ipv6_find_hdr Kamal Mostafa
2016-03-16 20:05 ` [PATCH 3.19.y-ckt 66/70] cdc_ncm: do not call usbnet_link_change from cdc_ncm_bind Kamal Mostafa
2016-03-16 20:06 ` [PATCH 3.19.y-ckt 67/70] net: qca_spi: Don't clear IFF_BROADCAST Kamal Mostafa
2016-03-16 20:06 ` [PATCH 3.19.y-ckt 68/70] net: moxa: fix an error code Kamal Mostafa
2016-03-16 20:06 ` [PATCH 3.19.y-ckt 69/70] mld, igmp: Fix reserved tailroom calculation Kamal Mostafa
2016-03-16 20:06 ` [PATCH 3.19.y-ckt 70/70] IB/core: Use GRH when the path hop-limit > 0 Kamal Mostafa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1458158763-9614-14-git-send-email-kamal@canonical.com \
--to=kamal@canonical.com \
--cc=jun.li@nxp.com \
--cc=kernel-team@lists.ubuntu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=peter.chen@nxp.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®