From: Arnd Bergmann <arnd@arndb.de>
To: Pravin Shelar <pshelar@nicira.com>,
"David S. Miller" <davem@davemloft.net>
Cc: Arnd Bergmann <arnd@arndb.de>, Thomas Graf <tgraf@suug.ch>,
Joe Stringer <joestringer@nicira.com>,
Paolo Abeni <pabeni@redhat.com>, Jarno Rajahalme <jarno@ovn.org>,
Pablo Neira Ayuso <pablo@netfilter.org>,
"Eric W. Biederman" <ebiederm@xmission.com>,
Florian Westphal <fw@strlen.de>,
netdev@vger.kernel.org, dev@openvswitch.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2] openvswitch: call only into reachable nf-nat code
Date: Fri, 18 Mar 2016 14:33:45 +0100 [thread overview]
Message-ID: <1458308044-246105-1-git-send-email-arnd@arndb.de> (raw)
The openvswitch code has gained support for calling into the
nf-nat-ipv4/ipv6 modules, however those can be loadable modules
in a configuration in which openvswitch is built-in, leading
to link errors:
net/built-in.o: In function `__ovs_ct_lookup':
:(.text+0x2cc2c8): undefined reference to `nf_nat_icmp_reply_translation'
:(.text+0x2cc66c): undefined reference to `nf_nat_icmpv6_reply_translation'
The dependency on (!NF_NAT || NF_NAT) prevents similar issues,
but NF_NAT is set to 'y' if any of the symbols selecting
it are built-in, but the link error happens when any of them
are modular.
A second issue is that even if CONFIG_NF_NAT_IPV6 is built-in,
CONFIG_NF_NAT_IPV4 might be completely disabled. This is unlikely
to be useful in practice, but the driver currently only handles
IPv6 being optional.
This patch improves the Kconfig dependency so that openvswitch
cannot be built-in if either of the two other symbols are set
to 'm', and it replaces the incorrect #ifdef in ovs_ct_nat_execute()
with two "if (IS_ENABLED())" checks that should catch all corner
cases also make the code more readable.
The same #ifdef exists ovs_ct_nat_to_attr(), where it does not
cause a link error, but for consistency I'm changing it the same
way.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 05752523e565 ("openvswitch: Interface with NAT.")
Acked-by: Joe Stringer <joe@ovn.org>
---
v2: leave (!NF_NAT || NF_NAT) dependency in there, we also need that
net/openvswitch/Kconfig | 4 +++-
net/openvswitch/conntrack.c | 16 ++++++++--------
2 files changed, 11 insertions(+), 9 deletions(-)
diff --git a/net/openvswitch/Kconfig b/net/openvswitch/Kconfig
index 234a73344c6e..ce947292ae77 100644
--- a/net/openvswitch/Kconfig
+++ b/net/openvswitch/Kconfig
@@ -7,7 +7,9 @@ config OPENVSWITCH
depends on INET
depends on !NF_CONNTRACK || \
(NF_CONNTRACK && ((!NF_DEFRAG_IPV6 || NF_DEFRAG_IPV6) && \
- (!NF_NAT || NF_NAT)))
+ (!NF_NAT || NF_NAT) && \
+ (!NF_NAT_IPV4 || NF_NAT_IPV4) && \
+ (!NF_NAT_IPV6 || NF_NAT_IPV6)))
select LIBCRC32C
select MPLS
select NET_MPLS_GSO
diff --git a/net/openvswitch/conntrack.c b/net/openvswitch/conntrack.c
index dc5eb29fe7d6..ff04b5db04b3 100644
--- a/net/openvswitch/conntrack.c
+++ b/net/openvswitch/conntrack.c
@@ -535,14 +535,15 @@ static int ovs_ct_nat_execute(struct sk_buff *skb, struct nf_conn *ct,
switch (ctinfo) {
case IP_CT_RELATED:
case IP_CT_RELATED_REPLY:
- if (skb->protocol == htons(ETH_P_IP) &&
+ if (IS_ENABLED(CONFIG_NF_NAT_IPV4) &&
+ skb->protocol == htons(ETH_P_IP) &&
ip_hdr(skb)->protocol == IPPROTO_ICMP) {
if (!nf_nat_icmp_reply_translation(skb, ct, ctinfo,
hooknum))
err = NF_DROP;
goto push;
-#if IS_ENABLED(CONFIG_NF_NAT_IPV6)
- } else if (skb->protocol == htons(ETH_P_IPV6)) {
+ } else if (IS_ENABLED(CONFIG_NF_NAT_IPV6) &&
+ skb->protocol == htons(ETH_P_IPV6)) {
__be16 frag_off;
u8 nexthdr = ipv6_hdr(skb)->nexthdr;
int hdrlen = ipv6_skip_exthdr(skb,
@@ -557,7 +558,6 @@ static int ovs_ct_nat_execute(struct sk_buff *skb, struct nf_conn *ct,
err = NF_DROP;
goto push;
}
-#endif
}
/* Non-ICMP, fall thru to initialize if needed. */
case IP_CT_NEW:
@@ -1238,7 +1238,8 @@ static bool ovs_ct_nat_to_attr(const struct ovs_conntrack_info *info,
}
if (info->range.flags & NF_NAT_RANGE_MAP_IPS) {
- if (info->family == NFPROTO_IPV4) {
+ if (IS_ENABLED(CONFIG_NF_NAT_IPV4) &&
+ info->family == NFPROTO_IPV4) {
if (nla_put_in_addr(skb, OVS_NAT_ATTR_IP_MIN,
info->range.min_addr.ip) ||
(info->range.max_addr.ip
@@ -1246,8 +1247,8 @@ static bool ovs_ct_nat_to_attr(const struct ovs_conntrack_info *info,
(nla_put_in_addr(skb, OVS_NAT_ATTR_IP_MAX,
info->range.max_addr.ip))))
return false;
-#if IS_ENABLED(CONFIG_NF_NAT_IPV6)
- } else if (info->family == NFPROTO_IPV6) {
+ } else if (IS_ENABLED(CONFIG_NF_NAT_IPV6) &&
+ info->family == NFPROTO_IPV6) {
if (nla_put_in6_addr(skb, OVS_NAT_ATTR_IP_MIN,
&info->range.min_addr.in6) ||
(memcmp(&info->range.max_addr.in6,
@@ -1256,7 +1257,6 @@ static bool ovs_ct_nat_to_attr(const struct ovs_conntrack_info *info,
(nla_put_in6_addr(skb, OVS_NAT_ATTR_IP_MAX,
&info->range.max_addr.in6))))
return false;
-#endif
} else {
return false;
}
--
2.7.0
next reply other threads:[~2016-03-18 13:35 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-18 13:33 Arnd Bergmann [this message]
2016-03-18 21:41 ` David Miller
2016-03-22 8:10 ` Pablo Neira Ayuso
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1458308044-246105-1-git-send-email-arnd@arndb.de \
--to=arnd@arndb.de \
--cc=davem@davemloft.net \
--cc=dev@openvswitch.org \
--cc=ebiederm@xmission.com \
--cc=fw@strlen.de \
--cc=jarno@ovn.org \
--cc=joestringer@nicira.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=pablo@netfilter.org \
--cc=pshelar@nicira.com \
--cc=tgraf@suug.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®