[PATCH] regulator: Remove unneded check for regulator supply

[Javier Martinez Canillas <javier@osg.samsung.com>]

The regulator_resolve_supply() function checks if a supply has been
associated with a regulator to avoid enabling it if that is not the
case.

But the supply was already looked up with regulator_resolve_supply()
and set with set_supply() before the check and both return on error.

So the fact that this statement has been reached means that neither
of them failed and a supply must be associated with the regulator.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>

---

 drivers/regulator/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index e0b764284773..6dd63523bcfe 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1532,7 +1532,7 @@ static int regulator_resolve_supply(struct regulator_dev *rdev)
 	}
 
 	/* Cascade always-on state to supply */
-	if (_regulator_is_enabled(rdev) && rdev->supply) {
+	if (_regulator_is_enabled(rdev)) {
 		ret = regulator_enable(rdev->supply);
 		if (ret < 0) {
 			_regulator_put(rdev->supply);
-- 
2.5.0