From: Noam Camus <noamca@mellanox.com>
To: <daniel.lezcano@linaro.org>, <marc.zyngier@arm.com>,
<jason@lakedaemon.net>
Cc: <linux-kernel@vger.kernel.org>,
<linux-snps-arc@lists.infradead.org>,
"Noam Camus" <noamc@ezchip.com>
Subject: [PATCH v6 1/3] soc: Support for EZchip SoC
Date: Mon, 21 Mar 2016 16:24:30 +0200 [thread overview]
Message-ID: <1458570272-23037-2-git-send-email-noamca@mellanox.com> (raw)
In-Reply-To: <1458570272-23037-1-git-send-email-noamca@mellanox.com>
From: Noam Camus <noamc@ezchip.com>
This header file is for NPS400 SoC.
It includes macros for accessing memory mapped registers.
These are functional registers that core can use to configure SoC.
Signed-off-by: Noam Camus <noamc@ezchip.com>
---
include/soc/nps/common.h | 166 ++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 166 insertions(+), 0 deletions(-)
create mode 100644 include/soc/nps/common.h
diff --git a/include/soc/nps/common.h b/include/soc/nps/common.h
new file mode 100644
index 0000000..e959176
--- /dev/null
+++ b/include/soc/nps/common.h
@@ -0,0 +1,166 @@
+/*
+ * Copyright (c) 2016, Mellanox Technologies. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef SOC_NPS_COMMON_H
+#define SOC_NPS_COMMON_H
+
+#ifdef CONFIG_SMP
+#define IPI_IRQ 5
+#endif
+
+#define NPS_HOST_REG_BASE 0xF6000000
+
+#define NPS_MSU_BLKID 0x018
+
+#define CTOP_INST_RSPI_GIC_0_R12 0x3C56117E
+#define CTOP_INST_MOV2B_FLIP_R3_B1_B2_INST 0x5B60
+#define CTOP_INST_MOV2B_FLIP_R3_B1_B2_LIMM 0x00010422
+
+#ifndef __ASSEMBLY__
+
+/* In order to increase compilation test coverage */
+#ifdef CONFIG_ARC
+static inline void nps_ack_gic(void)
+{
+ __asm__ __volatile__ (
+ " .word %0\n"
+ :
+ : "i"(CTOP_INST_RSPI_GIC_0_R12)
+ : "memory");
+}
+#else
+static inline void nps_ack_gic(void) { }
+#define write_aux_reg(r, v)
+#define read_aux_reg(r) 0
+#endif
+
+/* CPU global ID */
+struct global_id {
+ union {
+ struct {
+#ifdef CONFIG_EZNPS_MTM_EXT
+ u32 __reserved:20, cluster:4, core:4, thread:4;
+#else
+ u32 __reserved:24, cluster:4, core:4;
+#endif
+ };
+ u32 value;
+ };
+};
+
+/*
+ * Convert logical to physical CPU IDs
+ *
+ * The conversion swap bits 1 and 2 of cluster id (out of 4 bits)
+ * Now quad of logical clusters id's are adjacent physically,
+ * and not like the id's physically came with each cluster.
+ * Below table is 4x4 mesh of core clusters as it layout on chip.
+ * Cluster ids are in format: logical (physical)
+ *
+ * ----------------- ------------------
+ * 3 | 5 (3) 7 (7) | | 13 (11) 15 (15)|
+ *
+ * 2 | 4 (2) 6 (6) | | 12 (10) 14 (14)|
+ * ----------------- ------------------
+ * 1 | 1 (1) 3 (5) | | 9 (9) 11 (13)|
+ *
+ * 0 | 0 (0) 2 (4) | | 8 (8) 10 (12)|
+ * ----------------- ------------------
+ * 0 1 2 3
+ */
+static inline int nps_cluster_logic_to_phys(int cluster)
+{
+#ifdef __arc__
+ __asm__ __volatile__(
+ " mov r3,%0\n"
+ " .short %1\n"
+ " .word %2\n"
+ " mov %0,r3\n"
+ : "+r"(cluster)
+ : "i"(CTOP_INST_MOV2B_FLIP_R3_B1_B2_INST),
+ "i"(CTOP_INST_MOV2B_FLIP_R3_B1_B2_LIMM)
+ : "r3");
+#endif
+
+ return cluster;
+}
+
+#define NPS_CPU_TO_CLUSTER_NUM(cpu) \
+ ({ struct global_id gid; gid.value = cpu; \
+ nps_cluster_logic_to_phys(gid.cluster); })
+
+struct nps_host_reg_address {
+ union {
+ struct {
+ u32 base:8, cl_x:4, cl_y:4,
+ blkid:6, reg:8, __reserved:2;
+ };
+ u32 value;
+ };
+};
+
+struct nps_host_reg_address_non_cl {
+ union {
+ struct {
+ u32 base:7, blkid:11, reg:12, __reserved:2;
+ };
+ u32 value;
+ };
+};
+
+static inline void *nps_host_reg_non_cl(u32 blkid, u32 reg)
+{
+ struct nps_host_reg_address_non_cl reg_address;
+
+ reg_address.value = NPS_HOST_REG_BASE;
+ reg_address.blkid = blkid;
+ reg_address.reg = reg;
+
+ return (void *)reg_address.value;
+}
+
+static inline void *nps_host_reg(u32 cpu, u32 blkid, u32 reg)
+{
+ struct nps_host_reg_address reg_address;
+ u32 cl = NPS_CPU_TO_CLUSTER_NUM(cpu);
+
+ reg_address.value = NPS_HOST_REG_BASE;
+ reg_address.cl_x = (cl >> 2) & 0x3;
+ reg_address.cl_y = cl & 0x3;
+ reg_address.blkid = blkid;
+ reg_address.reg = reg;
+
+ return (void *)reg_address.value;
+}
+#endif /* __ASSEMBLY__ */
+
+#endif /* SOC_NPS_COMMON_H */
--
1.7.1
next prev parent reply other threads:[~2016-03-21 14:24 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-21 14:24 [PATCH v6 0/3] Adding NPS400 drivers Noam Camus
2016-03-21 14:24 ` Noam Camus [this message]
2016-03-21 14:24 ` [PATCH v6 2/3] clocksource: Add NPS400 timers driver Noam Camus
2016-03-29 12:52 ` Vineet Gupta
2016-03-29 13:21 ` Daniel Lezcano
2016-04-07 9:22 ` Vineet Gupta
2016-03-21 14:24 ` [PATCH v6 3/3] irqchip: add nps Internal and external irqchips Noam Camus
2016-03-29 12:55 ` Vineet Gupta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1458570272-23037-2-git-send-email-noamca@mellanox.com \
--to=noamca@mellanox.com \
--cc=daniel.lezcano@linaro.org \
--cc=jason@lakedaemon.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-snps-arc@lists.infradead.org \
--cc=marc.zyngier@arm.com \
--cc=noamc@ezchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®