mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Arnd Bergmann <arnd@arndb.de>
To: Doug Ledford <dledford@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>,
	Faisal Latif <faisal.latif@intel.com>,
	Chien Tin Tung <chien.tin.tung@intel.com>,
	Mustafa Ismail <mustafa.ismail@intel.com>,
	Shiraz Saleem <shiraz.saleem@intel.com>,
	Tatyana Nikolova <tatyana.e.nikolova@intel.com>,
	Sean Hefty <sean.hefty@intel.com>,
	Hal Rosenstock <hal.rosenstock@gmail.com>,
	Shannon Nelson <shannon.nelson@intel.com>,
	Anjali Singhai Jain <anjali.singhai@intel.com>,
	linux-rdma@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] i40iw: avoid potential uninitialized variable use
Date: Wed, 23 Mar 2016 11:34:36 +0100	[thread overview]
Message-ID: <1458729361-3089439-1-git-send-email-arnd@arndb.de> (raw)

gcc finds that the i40iw_make_cm_node() function in the recently added
i40iw driver uses an uninitilized variable as an index into an array
if CONFIG_IPV6 is disabled and the driver uses IPv6 mode:

drivers/infiniband/hw/i40iw/i40iw_cm.c: In function 'i40iw_make_cm_node':
drivers/infiniband/hw/i40iw/i40iw_cm.c:2206:52: error: 'arpindex' may be used uninitialized in this function [-Werror=maybe-uninitialized]
  ether_addr_copy(cm_node->rem_mac, iwdev->arp_table[arpindex].mac_addr);

As far as I can tell, this code path can not be used because the ipv4
variable is always set with CONFIG_IPV6 is disabled, but it's better
to be sure and prevent the undefined behavior, as well as shut up
that warning in a proper way.

This adds an 'else' clause for the case we get the warning about,
causing the function to return an error in a controlled way.
To avoid adding extra mess with combined io()/#ifdef clauses,
I'm also converting the existing #ifdef into a more readable
if(IS_ENABLED()) check.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: f27b4746f378 ("i40iw: add connection management code")
---
 drivers/infiniband/hw/i40iw/i40iw_cm.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/infiniband/hw/i40iw/i40iw_cm.c b/drivers/infiniband/hw/i40iw/i40iw_cm.c
index 92745d755272..38f917a6c778 100644
--- a/drivers/infiniband/hw/i40iw/i40iw_cm.c
+++ b/drivers/infiniband/hw/i40iw/i40iw_cm.c
@@ -1992,7 +1992,6 @@ static int i40iw_addr_resolve_neigh(struct i40iw_device *iwdev,
 /**
  * i40iw_get_dst_ipv6
  */
-#if IS_ENABLED(CONFIG_IPV6)
 static struct dst_entry *i40iw_get_dst_ipv6(struct sockaddr_in6 *src_addr,
 					    struct sockaddr_in6 *dst_addr)
 {
@@ -2008,7 +2007,6 @@ static struct dst_entry *i40iw_get_dst_ipv6(struct sockaddr_in6 *src_addr,
 	dst = ip6_route_output(&init_net, NULL, &fl6);
 	return dst;
 }
-#endif
 
 /**
  * i40iw_addr_resolve_neigh_ipv6 - resolve neighbor ipv6 address
@@ -2016,7 +2014,6 @@ static struct dst_entry *i40iw_get_dst_ipv6(struct sockaddr_in6 *src_addr,
  * @dst_ip: remote ip address
  * @arpindex: if there is an arp entry
  */
-#if IS_ENABLED(CONFIG_IPV6)
 static int i40iw_addr_resolve_neigh_ipv6(struct i40iw_device *iwdev,
 					 u32 *src,
 					 u32 *dest,
@@ -2089,7 +2086,6 @@ static int i40iw_addr_resolve_neigh_ipv6(struct i40iw_device *iwdev,
 	dst_release(dst);
 	return rc;
 }
-#endif
 
 /**
  * i40iw_ipv4_is_loopback - check if loopback
@@ -2190,13 +2186,13 @@ static struct i40iw_cm_node *i40iw_make_cm_node(
 							    cm_info->loc_addr[0],
 							    cm_info->rem_addr[0],
 							    oldarpindex);
-#if IS_ENABLED(CONFIG_IPV6)
-		else
+		else if (IS_ENABLED(CONFIG_IPV6))
 			arpindex = i40iw_addr_resolve_neigh_ipv6(iwdev,
 								 cm_info->loc_addr,
 								 cm_info->rem_addr,
 								 oldarpindex);
-#endif
+		else
+			arpindex = -EINVAL;
 	}
 	if (arpindex < 0) {
 		i40iw_pr_err("cm_node arpindex\n");
-- 
2.7.0

             reply	other threads:[~2016-03-23 10:36 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-23 10:34 Arnd Bergmann [this message]
2016-03-23 20:56 ` Ismail, Mustafa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1458729361-3089439-1-git-send-email-arnd@arndb.de \
    --to=arnd@arndb.de \
    --cc=anjali.singhai@intel.com \
    --cc=chien.tin.tung@intel.com \
    --cc=dledford@redhat.com \
    --cc=faisal.latif@intel.com \
    --cc=hal.rosenstock@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rdma@vger.kernel.org \
    --cc=mustafa.ismail@intel.com \
    --cc=sean.hefty@intel.com \
    --cc=shannon.nelson@intel.com \
    --cc=shiraz.saleem@intel.com \
    --cc=tatyana.e.nikolova@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®