From: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
To: tony@atomide.com, lgirdwood@gmail.com, broonie@kernel.org
Cc: sre@kernel.org, pali.rohar@gmail.com, linux-omap@vger.kernel.org,
linux-kernel@vger.kernel.org,
Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Subject: [PATCH 2/3] regulator: twl: Provide of_map_mode for twl4030
Date: Sat, 26 Mar 2016 10:28:14 +0200 [thread overview]
Message-ID: <1458980895-10240-3-git-send-email-ivo.g.dimitrov.75@gmail.com> (raw)
In-Reply-To: <1458980895-10240-1-git-send-email-ivo.g.dimitrov.75@gmail.com>
of_map_mode is needed so to be possible to set initial regulators mode from
the board DTS. Otherwise, for DT boot, regulators are left in their default
state after reset/reboot.
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
---
drivers/regulator/twl-regulator.c | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c
index aad748b0..be8d05e 100644
--- a/drivers/regulator/twl-regulator.c
+++ b/drivers/regulator/twl-regulator.c
@@ -395,6 +395,12 @@ static int twl4030reg_set_mode(struct regulator_dev *rdev, unsigned mode)
return twl4030_send_pb_msg(message);
}
+static inline unsigned int twl4030reg_map_mode(unsigned int mode)
+{
+ return mode == RES_STATE_ACTIVE ?
+ REGULATOR_MODE_NORMAL : REGULATOR_MODE_STANDBY;
+}
+
static int twl6030reg_set_mode(struct regulator_dev *rdev, unsigned mode)
{
struct twlreg_info *info = rdev_get_drvdata(rdev);
@@ -897,10 +903,11 @@ static struct regulator_ops twlsmps_ops = {
#define TWL4030_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \
remap_conf) \
TWL_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \
- remap_conf, TWL4030, twl4030fixed_ops)
+ remap_conf, TWL4030, twl4030fixed_ops, \
+ twl4030reg_map_mode)
#define TWL6030_FIXED_LDO(label, offset, mVolts, turnon_delay) \
TWL_FIXED_LDO(label, offset, mVolts, 0x0, turnon_delay, \
- 0x0, TWL6030, twl6030fixed_ops)
+ 0x0, TWL6030, twl6030fixed_ops, 0x0)
#define TWL4030_ADJUSTABLE_LDO(label, offset, num, turnon_delay, remap_conf) \
static const struct twlreg_info TWL4030_INFO_##label = { \
@@ -917,6 +924,7 @@ static const struct twlreg_info TWL4030_INFO_##label = { \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.enable_time = turnon_delay, \
+ .of_map_mode = twl4030reg_map_mode, \
}, \
}
@@ -932,6 +940,7 @@ static const struct twlreg_info TWL4030_INFO_##label = { \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.enable_time = turnon_delay, \
+ .of_map_mode = twl4030reg_map_mode, \
}, \
}
@@ -977,7 +986,7 @@ static const struct twlreg_info TWL6032_INFO_##label = { \
}
#define TWL_FIXED_LDO(label, offset, mVolts, num, turnon_delay, remap_conf, \
- family, operations) \
+ family, operations, map_mode) \
static const struct twlreg_info TWLFIXED_INFO_##label = { \
.base = offset, \
.id = num, \
@@ -992,6 +1001,7 @@ static const struct twlreg_info TWLFIXED_INFO_##label = { \
.owner = THIS_MODULE, \
.min_uV = mVolts * 1000, \
.enable_time = turnon_delay, \
+ .of_map_mode = map_mode, \
}, \
}
--
1.9.1
next prev parent reply other threads:[~2016-03-26 8:30 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-26 8:28 [PATCH 0/3] regulator: twl: Fix regulator mode support Ivaylo Dimitrov
2016-03-26 8:28 ` [PATCH 1/3] regulator: twl: Make sure we have access to powerbus before trying to write to it Ivaylo Dimitrov
2016-04-05 22:26 ` Ivaylo Dimitrov
2016-04-06 6:06 ` [PATCH] regulator: twl: Fix a typo in twl4030_send_pb_msg Ivaylo Dimitrov
2016-04-24 16:10 ` [PATCH 1/3] regulator: twl: Make sure we have access to powerbus before trying to write to it Pavel Machek
2016-04-24 17:14 ` Ivaylo Dimitrov
2016-03-26 8:28 ` Ivaylo Dimitrov [this message]
2016-03-28 9:39 ` [PATCH 2/3] regulator: twl: Provide of_map_mode for twl4030 Mark Brown
2016-04-04 18:57 ` [PATCH] " Ivaylo Dimitrov
2016-04-04 22:26 ` Mark Brown
2016-04-05 5:59 ` [PATCH v1] " Ivaylo Dimitrov
2016-04-07 17:57 ` Rob Herring
2016-04-08 15:49 ` Tony Lindgren
2016-04-08 16:08 ` Sebastian Reichel
2016-04-08 16:19 ` Tony Lindgren
2016-04-08 17:54 ` Tony Lindgren
2016-03-26 8:28 ` [PATCH 3/3] regulator: twl: Regulator mode should not depend on regulator enabled state Ivaylo Dimitrov
2016-04-24 16:11 ` Pavel Machek
2016-04-24 17:01 ` Ivaylo Dimitrov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1458980895-10240-3-git-send-email-ivo.g.dimitrov.75@gmail.com \
--to=ivo.g.dimitrov.75@gmail.com \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=pali.rohar@gmail.com \
--cc=sre@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®