From: Wei Ni <wni@nvidia.com>
To: <edubezval@gmail.com>, <rui.zhang@intel.com>, <thierry.reding@gmail.com>
Cc: <MLongnecker@nvidia.com>, <swarren@wwwdotorg.org>,
<mikko.perttunen@kapsi.fi>, <linux-tegra@vger.kernel.org>,
<linux-pm@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Wei Ni <wni@nvidia.com>
Subject: [PATCH V9 RESEND 13/14] arm64: tegra: add soctherm node for Tegra210
Date: Tue, 29 Mar 2016 18:29:23 +0800 [thread overview]
Message-ID: <1459247364-1139-14-git-send-email-wni@nvidia.com> (raw)
In-Reply-To: <1459247364-1139-1-git-send-email-wni@nvidia.com>
Adds soctherm node for Tegra210, and add cpu,
gpu, mem, pllx as thermal-zones. Set critical
trip temperatures for them.
Signed-off-by: Wei Ni <wni@nvidia.com>
---
arch/arm64/boot/dts/nvidia/tegra210.dtsi | 104 +++++++++++++++++++++++++++++++
1 file changed, 104 insertions(+)
diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
index 23b0630602cf..232fa14a913d 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
@@ -3,6 +3,7 @@
#include <dt-bindings/memory/tegra210-mc.h>
#include <dt-bindings/pinctrl/pinctrl-tegra.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/tegra124-soctherm.h>
/ {
compatible = "nvidia,tegra210";
@@ -802,4 +803,107 @@
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
interrupt-parent = <&gic>;
};
+
+ soctherm: thermal-sensor@0,700e2000 {
+ compatible = "nvidia,tegra210-soctherm";
+ reg = <0x0 0x700e2000 0x0 0x1000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA210_CLK_TSENSOR>,
+ <&tegra_car TEGRA210_CLK_SOC_THERM>;
+ clock-names = "tsensor", "soctherm";
+ resets = <&tegra_car 78>;
+ reset-names = "soctherm";
+ #thermal-sensor-cells = <1>;
+ };
+
+ thermal-zones {
+ cpu {
+ polling-delay-passive = <1000>;
+ polling-delay = <0>;
+
+ thermal-sensors =
+ <&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
+
+ trips {
+ cpu-shutdown-trip {
+ temperature = <102500>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ /*
+ * There are currently no cooling maps,
+ * because there are no cooling devices.
+ */
+ };
+ };
+ mem {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors =
+ <&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>;
+
+ trips {
+ mem-shutdown-trip {
+ temperature = <103000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ /*
+ * There are currently no cooling maps,
+ * because there are no cooling devices.
+ */
+ };
+ };
+ gpu {
+ polling-delay-passive = <1000>;
+ polling-delay = <0>;
+
+ thermal-sensors =
+ <&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>;
+
+ trips {
+ gpu-shutdown-trip {
+ temperature = <103000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ /*
+ * There are currently no cooling maps,
+ * because there are no cooling devices.
+ */
+ };
+ };
+ pllx {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors =
+ <&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>;
+
+ trips {
+ pllx-shutdown-trip {
+ temperature = <103000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ /*
+ * There are currently no cooling maps,
+ * because there are no cooling devices.
+ */
+ };
+ };
+ };
};
--
1.9.1
next prev parent reply other threads:[~2016-03-29 10:34 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-29 10:29 [PATCH V9 RESEND 00/14] Add T210 support in Tegra soctherm Wei Ni
2016-03-29 10:29 ` [PATCH V9 RESEND 01/14] thermal: tegra: move tegra thermal files into tegra directory Wei Ni
2016-03-29 10:29 ` [PATCH V9 RESEND 02/14] thermal: tegra: combine sensor group-related data Wei Ni
2016-03-29 10:29 ` [PATCH V9 RESEND 03/14] thermal: tegra: get rid of PDIV/HOTSPOT hack Wei Ni
2016-03-29 10:29 ` [PATCH V9 RESEND 04/14] thermal: tegra: split tegra_soctherm driver Wei Ni
2016-03-29 10:29 ` [PATCH V9 RESEND 05/14] thermal: tegra: add Tegra210 specific SOC_THERM driver Wei Ni
2016-03-29 10:29 ` [PATCH V9 RESEND 06/14] thermal: tegra: add a debugfs to show registers Wei Ni
2016-03-29 10:29 ` [PATCH V9 RESEND 07/14] thermal: of-thermal: allow setting trip_temp on hardware Wei Ni
2016-03-29 10:29 ` [PATCH V9 RESEND 08/14] of: add notes of critical trips for soctherm Wei Ni
2016-03-29 10:29 ` [PATCH V9 RESEND 09/14] thermal: tegra: add thermtrip function Wei Ni
2016-03-29 10:29 ` [PATCH V9 RESEND 10/14] thermal: tegra: handle clocks in one function Wei Ni
2016-03-29 10:29 ` [PATCH V9 RESEND 11/14] thermal: tegra: handle HW initialization in one funcotion Wei Ni
2016-03-29 10:29 ` [PATCH V9 RESEND 12/14] thermal: tegra: add PM support Wei Ni
2016-03-29 10:29 ` Wei Ni [this message]
2016-03-29 15:16 ` [PATCH V9 RESEND 13/14] arm64: tegra: add soctherm node for Tegra210 Eduardo Valentin
2016-03-30 3:24 ` Wei Ni
2016-03-30 10:28 ` Wei Ni
2016-04-01 7:01 ` Wei Ni
2016-04-12 8:53 ` Wei Ni
2016-04-26 3:36 ` Wei Ni
2016-05-03 9:29 ` Wei Ni
2016-03-29 10:29 ` [PATCH V9 RESEND 14/14] arm: tegra: set critical trips for Tegra124 Wei Ni
2016-03-29 15:17 ` Eduardo Valentin
2016-04-01 7:04 ` Wei Ni
2016-04-12 8:53 ` Wei Ni
2016-03-30 10:30 ` Wei Ni
2016-03-29 10:36 ` [PATCH V9 RESEND 00/14] Add T210 support in Tegra soctherm Wei Ni
2016-03-29 15:13 ` Eduardo Valentin
2016-03-29 15:18 ` Eduardo Valentin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1459247364-1139-14-git-send-email-wni@nvidia.com \
--to=wni@nvidia.com \
--cc=MLongnecker@nvidia.com \
--cc=edubezval@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=mikko.perttunen@kapsi.fi \
--cc=rui.zhang@intel.com \
--cc=swarren@wwwdotorg.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®