mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Grigori Goronzy <greg@chown.ath.cx>
To: Johan Hovold <johan@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	Grigori Goronzy <greg@chown.ath.cx>
Subject: [PATCH v2 07/14] USB: ch341: add support for parity, frame length, stop bits
Date: Sat,  2 Apr 2016 19:07:16 +0200	[thread overview]
Message-ID: <1459616843-23829-8-git-send-email-greg@chown.ath.cx> (raw)
In-Reply-To: <1459616843-23829-1-git-send-email-greg@chown.ath.cx>

With the new reinitialization method, configuring parity, different
frame lengths and different stop bit settings work as expected on
both CH340G and CH341A.  This has been extensively tested with a
logic analyzer.

Tested-by: Ryan Barber <rfb@skyscraper.nu>
Signed-off-by: Grigori Goronzy <greg@chown.ath.cx>
---
 drivers/usb/serial/ch341.c | 36 ++++++++++++++++++++++++++++++------
 1 file changed, 30 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index c001773..4d66f0f 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -346,6 +346,7 @@ static void ch341_set_termios(struct tty_struct *tty,
 	unsigned baud_rate;
 	unsigned long flags;
 	unsigned char ctrl;
+	unsigned cflag = tty->termios.c_cflag;
 	int r;
 
 	/* redundant changes may cause the chip to lose bytes */
@@ -356,7 +357,35 @@ static void ch341_set_termios(struct tty_struct *tty,
 
 	priv->baud_rate = baud_rate;
 
-	ctrl = CH341_LCR_ENABLE_RX | CH341_LCR_ENABLE_TX | CH341_LCR_CS8;
+	ctrl = CH341_LCR_ENABLE_RX | CH341_LCR_ENABLE_TX;
+
+	switch (cflag & CSIZE) {
+	case CS5:
+		ctrl |= CH341_LCR_CS5;
+		break;
+	case CS6:
+		ctrl |= CH341_LCR_CS6;
+		break;
+	case CS7:
+		ctrl |= CH341_LCR_CS7;
+		break;
+	case CS8:
+	default:
+		ctrl |= CH341_LCR_CS8;
+		break;
+	}
+
+	if (cflag & PARENB) {
+		ctrl |= CH341_LCR_ENABLE_PAR;
+		if ((cflag & PARODD) == 0)
+			ctrl |= CH341_LCR_PAR_EVEN;
+	}
+
+	if (cflag & CMSPAR)
+		ctrl |= CH341_LCR_MARK_SPACE;
+
+	if (cflag & CSTOPB)
+		ctrl |= CH341_LCR_STOP_BITS_2;
 
 	if (baud_rate) {
 		spin_lock_irqsave(&priv->lock, flags);
@@ -373,11 +402,6 @@ static void ch341_set_termios(struct tty_struct *tty,
 
 	ch341_set_handshake(port->serial->dev, priv->line_control);
 
-	/* Unimplemented:
-	 * (cflag & CSIZE) : data bits [5, 8]
-	 * (cflag & PARENB) : parity {NONE, EVEN, ODD}
-	 * (cflag & CSTOPB) : stop bits [1, 2]
-	 */
 }
 
 static void ch341_break_ctl(struct tty_struct *tty, int break_state)
-- 
1.9.1

  parent reply	other threads:[~2016-04-02 17:19 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-02 17:07 Major improvements to the ch341 driver Grigori Goronzy
2016-04-02 17:07 ` [PATCH v2 01/14] USB: ch341: improve documentation Grigori Goronzy
2016-04-06 11:58   ` One Thousand Gnomes
2016-04-02 17:07 ` [PATCH v2 02/14] USB: ch341: fix error handling on resume Grigori Goronzy
2016-04-02 17:07 ` [PATCH v2 03/14] USB: ch341: add LCR register definitions Grigori Goronzy
2016-04-02 17:07 ` [PATCH v2 04/14] USB: ch341: add definitions for modem control Grigori Goronzy
2016-04-02 17:07 ` [PATCH v2 05/14] USB: ch341: fix USB buffer allocations Grigori Goronzy
2016-04-04  7:13   ` Oliver Neukum
2016-04-02 17:07 ` [PATCH v2 06/14] USB: ch341: reinitialize chip on reconfiguration Grigori Goronzy
2016-04-10 13:24   ` Clemens Ladisch
2016-04-02 17:07 ` Grigori Goronzy [this message]
2016-04-03 15:58   ` [PATCH v2 07/14] USB: ch341: add support for parity, frame length, stop bits Karl Palsson
2016-04-06 11:59   ` One Thousand Gnomes
2016-04-02 17:07 ` [PATCH v2 08/14] USB: ch341: add debug output for chip version Grigori Goronzy
2016-04-02 17:07 ` [PATCH v2 09/14] USB: ch341: add support for RTS/CTS flow control Grigori Goronzy
2016-04-02 17:07 ` [PATCH v2 10/14] USB: ch341: fix coding style Grigori Goronzy
2016-04-02 17:29   ` Joe Perches
2016-04-06 17:58     ` Grigori Goronzy
2016-04-06 18:10       ` Johan Hovold
2016-04-07  1:11         ` Grigori Goronzy
2016-04-02 17:07 ` [PATCH v2 11/14] USB: ch341: clean up messages Grigori Goronzy
2016-04-02 17:07 ` [PATCH v2 12/14] USB: ch341: improve B0 handling Grigori Goronzy
2016-04-02 17:07 ` [PATCH v2 13/14] USB: ch341: get rid of default configuration Grigori Goronzy
2016-04-02 17:07 ` [PATCH v2 14/14] USB: ch341: implement tx_empty callback Grigori Goronzy
2016-04-03 16:03   ` Karl Palsson
2016-04-06 18:03     ` Grigori Goronzy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1459616843-23829-8-git-send-email-greg@chown.ath.cx \
    --to=greg@chown.ath.cx \
    --cc=gregkh@linuxfoundation.org \
    --cc=johan@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®