From: Grygorii Strashko <grygorii.strashko@ti.com>
To: "David S. Miller" <davem@davemloft.net>, <netdev@vger.kernel.org>,
Mugunthan V N <mugunthanvnm@ti.com>
Cc: Sekhar Nori <nsekhar@ti.com>, <linux-kernel@vger.kernel.org>,
<linux-omap@vger.kernel.org>,
Grygorii Strashko <grygorii.strashko@ti.com>
Subject: [PATCH 1/2] drivers: net: cpsw: fix port_mask parameters in ale calls
Date: Thu, 7 Apr 2016 15:16:43 +0300 [thread overview]
Message-ID: <1460031404-28594-2-git-send-email-grygorii.strashko@ti.com> (raw)
In-Reply-To: <1460031404-28594-1-git-send-email-grygorii.strashko@ti.com>
ALE APIs expect to receive port masks as input values for arguments
port_mask, untag, reg_mcast, unreg_mcast. But there are few places in
code where port masks are passed left-shifted by cpsw_priv->host_port,
like below:
cpsw_ale_add_vlan(priv->ale, priv->data.default_vlan,
ALE_ALL_PORTS << priv->host_port,
ALE_ALL_PORTS << priv->host_port, 0, 0);
and cpsw is still working just because priv->host_port == 0
and has never ever been changed.
Hence, fix port_mask parameters in ALE APIs calls and drop
"<< priv->host_port" from all places where it's used to
shift valid port mask.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
drivers/net/ethernet/ti/cpsw.c | 22 +++++++++-------------
1 file changed, 9 insertions(+), 13 deletions(-)
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 42fdfd4..5292e70 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -535,7 +535,7 @@ static const struct cpsw_stats cpsw_gstrings_stats[] = {
ALE_VLAN, slave->port_vlan, 0); \
} else { \
cpsw_ale_add_mcast(priv->ale, addr, \
- ALE_ALL_PORTS << priv->host_port, \
+ ALE_ALL_PORTS, \
0, 0, 0); \
} \
} while (0)
@@ -602,8 +602,7 @@ static void cpsw_set_promiscious(struct net_device *ndev, bool enable)
cpsw_ale_control_set(ale, 0, ALE_AGEOUT, 1);
/* Clear all mcast from ALE */
- cpsw_ale_flush_multicast(ale, ALE_ALL_PORTS <<
- priv->host_port, -1);
+ cpsw_ale_flush_multicast(ale, ALE_ALL_PORTS, -1);
/* Flood All Unicast Packets to Host port */
cpsw_ale_control_set(ale, 0, ALE_P0_UNI_FLOOD, 1);
@@ -648,8 +647,7 @@ static void cpsw_ndo_set_rx_mode(struct net_device *ndev)
cpsw_ale_set_allmulti(priv->ale, priv->ndev->flags & IFF_ALLMULTI);
/* Clear all mcast from ALE */
- cpsw_ale_flush_multicast(priv->ale, ALE_ALL_PORTS << priv->host_port,
- vid);
+ cpsw_ale_flush_multicast(priv->ale, ALE_ALL_PORTS, vid);
if (!netdev_mc_empty(ndev)) {
struct netdev_hw_addr *ha;
@@ -1172,7 +1170,6 @@ static void cpsw_slave_open(struct cpsw_slave *slave, struct cpsw_priv *priv)
static inline void cpsw_add_default_vlan(struct cpsw_priv *priv)
{
const int vlan = priv->data.default_vlan;
- const int port = priv->host_port;
u32 reg;
int i;
int unreg_mcast_mask;
@@ -1190,9 +1187,9 @@ static inline void cpsw_add_default_vlan(struct cpsw_priv *priv)
else
unreg_mcast_mask = ALE_PORT_1 | ALE_PORT_2;
- cpsw_ale_add_vlan(priv->ale, vlan, ALE_ALL_PORTS << port,
- ALE_ALL_PORTS << port, ALE_ALL_PORTS << port,
- unreg_mcast_mask << port);
+ cpsw_ale_add_vlan(priv->ale, vlan, ALE_ALL_PORTS,
+ ALE_ALL_PORTS, ALE_ALL_PORTS,
+ unreg_mcast_mask);
}
static void cpsw_init_host_port(struct cpsw_priv *priv)
@@ -1273,8 +1270,7 @@ static int cpsw_ndo_open(struct net_device *ndev)
cpsw_add_default_vlan(priv);
else
cpsw_ale_add_vlan(priv->ale, priv->data.default_vlan,
- ALE_ALL_PORTS << priv->host_port,
- ALE_ALL_PORTS << priv->host_port, 0, 0);
+ ALE_ALL_PORTS, ALE_ALL_PORTS, 0, 0);
if (!cpsw_common_res_usage_state(priv)) {
struct cpsw_priv *priv_sl0 = cpsw_get_slave_priv(priv, 0);
@@ -1666,7 +1662,7 @@ static inline int cpsw_add_vlan_ale_entry(struct cpsw_priv *priv,
}
ret = cpsw_ale_add_vlan(priv->ale, vid, port_mask, 0, port_mask,
- unreg_mcast_mask << priv->host_port);
+ unreg_mcast_mask);
if (ret != 0)
return ret;
@@ -1738,7 +1734,7 @@ static int cpsw_ndo_vlan_rx_kill_vid(struct net_device *ndev,
return ret;
ret = cpsw_ale_del_ucast(priv->ale, priv->mac_addr,
- priv->host_port, ALE_VLAN, vid);
+ HOST_PORT_NUM, ALE_VLAN, vid);
if (ret != 0)
return ret;
--
2.8.0
next prev parent reply other threads:[~2016-04-07 12:16 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-07 12:16 [PATCH 0/2] drivers: net: cpsw: fix ale calls and drop host_port field from cpsw_priv Grygorii Strashko
2016-04-07 12:16 ` Grygorii Strashko [this message]
2016-04-07 12:16 ` [PATCH 2/2] drivers: net: cpsw: drop host_port field from struct cpsw_priv Grygorii Strashko
2016-04-11 8:36 ` [PATCH 0/2] drivers: net: cpsw: fix ale calls and drop host_port field from cpsw_priv Mugunthan V N
2016-04-11 19:12 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1460031404-28594-2-git-send-email-grygorii.strashko@ti.com \
--to=grygorii.strashko@ti.com \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=mugunthanvnm@ti.com \
--cc=netdev@vger.kernel.org \
--cc=nsekhar@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®