[PATCH v3 09/13] USB: ch341: fix coding style

[Grigori Goronzy <greg@chown.ath.cx>]

No functional change.  The following adjustments were made to be more in
line with official coding style and to be more consistent.

Stop mixing tabs and spaces for alignment.  Stop putting labels and
statements into the same line.  Use braces consistently for a single
statement.

v2: drop most changes, particularly indentation changes.

Signed-off-by: Grigori Goronzy <greg@chown.ath.cx>
---
 drivers/usb/serial/ch341.c | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 135370b..2d28556 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -133,7 +133,7 @@ static int ch341_control_in(struct usb_device *dev,
 }
 
 static int ch341_init_set_baudrate(struct usb_device *dev,
-			      struct ch341_private *priv, unsigned ctrl)
+				   struct ch341_private *priv, unsigned ctrl)
 {
 	short a;
 	int r;
@@ -187,10 +187,12 @@ static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv)
 		spin_lock_irqsave(&priv->lock, flags);
 		priv->line_status = (~(*buffer)) & CH341_BITS_MODEM_STAT;
 		spin_unlock_irqrestore(&priv->lock, flags);
-	} else
+	} else {
 		r = -EPROTO;
+	}
 
-out:	kfree(buffer);
+out:
+	kfree(buffer);
 	return r;
 }
 
@@ -241,7 +243,8 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv)
 	/* expect 0x9f 0xee */
 	r = ch341_get_status(dev, priv);
 
-out:	kfree(buffer);
+out:
+	kfree(buffer);
 	return r;
 }
 
@@ -265,7 +268,8 @@ static int ch341_port_probe(struct usb_serial_port *port)
 	usb_set_serial_port_data(port, priv);
 	return 0;
 
-error:	kfree(priv);
+error:
+	kfree(priv);
 	return r;
 }
 
@@ -479,7 +483,7 @@ static int ch341_tiocmset(struct tty_struct *tty,
 }
 
 static void ch341_update_line_status(struct usb_serial_port *port,
-					unsigned char *data, size_t len)
+				     unsigned char *data, size_t len)
 {
 	struct ch341_private *priv = usb_get_serial_port_data(port);
 	struct tty_struct *tty;
@@ -600,7 +604,7 @@ static struct usb_serial_driver ch341_device = {
 	.id_table          = id_table,
 	.num_ports         = 1,
 	.open              = ch341_open,
-	.dtr_rts	   = ch341_dtr_rts,
+	.dtr_rts           = ch341_dtr_rts,
 	.carrier_raised	   = ch341_carrier_raised,
 	.close             = ch341_close,
 	.set_termios       = ch341_set_termios,
-- 
1.9.1