mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Roger Quadros <rogerq@ti.com>
To: <balbi@kernel.org>
Cc: <tony@atomide.com>, <Joao.Pinto@synopsys.com>,
	<sergei.shtylyov@cogentembedded.com>, <peter.chen@freescale.com>,
	<jun.li@freescale.com>, <grygorii.strashko@ti.com>,
	<yoshihiro.shimoda.uh@renesas.com>, <nsekhar@ti.com>,
	<linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-omap@vger.kernel.org>, Roger Quadros <rogerq@ti.com>
Subject: [PATCH v6 01/10] usb: dwc3: core.h: add some register definitions
Date: Mon, 11 Apr 2016 14:34:57 +0300	[thread overview]
Message-ID: <1460374506-9779-2-git-send-email-rogerq@ti.com> (raw)
In-Reply-To: <1460374506-9779-1-git-send-email-rogerq@ti.com>

Add OTG and GHWPARAMS6 register definitions

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 drivers/usb/dwc3/core.h | 84 ++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 83 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 6254b2f..81039f7 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -176,6 +176,15 @@
 #define DWC3_GCTL_GBLHIBERNATIONEN	(1 << 1)
 #define DWC3_GCTL_DSBLCLKGTNG		(1 << 0)
 
+/* Global Status Register */
+#define DWC3_GSTS_OTG_IP	BIT(10)
+#define DWC3_GSTS_BC_IP		BIT(9)
+#define DWC3_GSTS_ADP_IP	BIT(8)
+#define DWC3_GSTS_HOST_IP	BIT(7)
+#define DWC3_GSTS_DEVICE_IP	BIT(6)
+#define DWC3_GSTS_CSR_TIMEOUT	BIT(5)
+#define DWC3_GSTS_BUS_ERR_ADDR_VLD	BIT(4)
+
 /* Global USB2 PHY Configuration Register */
 #define DWC3_GUSB2PHYCFG_PHYSOFTRST	(1 << 31)
 #define DWC3_GUSB2PHYCFG_SUSPHY		(1 << 6)
@@ -239,7 +248,12 @@
 #define DWC3_MAX_HIBER_SCRATCHBUFS		15
 
 /* Global HWPARAMS6 Register */
-#define DWC3_GHWPARAMS6_EN_FPGA			(1 << 7)
+#define DWC3_GHWPARAMS6_BCSUPPORT		BIT(14)
+#define DWC3_GHWPARAMS6_OTG3SUPPORT		BIT(13)
+#define DWC3_GHWPARAMS6_ADPSUPPORT		BIT(12)
+#define DWC3_GHWPARAMS6_HNPSUPPORT		BIT(11)
+#define DWC3_GHWPARAMS6_SRPSUPPORT		BIT(10)
+#define DWC3_GHWPARAMS6_EN_FPGA			BIT(7)
 
 /* Global Frame Length Adjustment Register */
 #define DWC3_GFLADJ_30MHZ_SDBND_SEL		(1 << 7)
@@ -404,6 +418,74 @@
 #define DWC3_DEPCMD_TYPE_BULK		2
 #define DWC3_DEPCMD_TYPE_INTR		3
 
+/* OTG Configuration Register */
+#define DWC3_OCFG_DISPWRCUTTOFF		BIT(5)
+#define DWC3_OCFG_HIBDISMASK		BIT(4)
+#define DWC3_OCFG_SFTRSTMASK		BIT(3)
+#define DWC3_OCFG_OTGVERSION		BIT(2)
+#define DWC3_OCFG_HNPCAP		BIT(1)
+#define DWC3_OCFG_SRPCAP		BIT(0)
+
+/* OTG CTL Register */
+#define DWC3_OCTL_OTG3GOERR		BIT(7)
+#define DWC3_OCTL_PERIMODE		BIT(6)
+#define DWC3_OCTL_PRTPWRCTL		BIT(5)
+#define DWC3_OCTL_HNPREQ		BIT(4)
+#define DWC3_OCTL_SESREQ		BIT(3)
+#define DWC3_OCTL_TERMSELIDPULSE	BIT(2)
+#define DWC3_OCTL_DEVSETHNPEN		BIT(1)
+#define DWC3_OCTL_HSTSETHNPEN		BIT(0)
+
+/* OTG Event Register */
+#define DWC3_OEVT_DEVICEMODE		BIT(31)
+#define DWC3_OEVT_XHCIRUNSTPSET		BIT(27)
+#define DWC3_OEVT_DEVRUNSTPSET		BIT(26)
+#define DWC3_OEVT_HIBENTRY		BIT(25)
+#define DWC3_OEVT_CONIDSTSCHNG		BIT(24)
+#define DWC3_OEVT_HRRCONFNOTIF		BIT(23)
+#define DWC3_OEVT_HRRINITNOTIF		BIT(22)
+#define DWC3_OEVT_ADEVIDLE		BIT(21)
+#define DWC3_OEVT_ADEVBHOSTEND		BIT(20)
+#define DWC3_OEVT_ADEVHOST		BIT(19)
+#define DWC3_OEVT_ADEVHNPCHNG		BIT(18)
+#define DWC3_OEVT_ADEVSRPDET		BIT(17)
+#define DWC3_OEVT_ADEVSESSENDDET	BIT(16)
+#define DWC3_OEVT_BDEVBHOSTEND		BIT(11)
+#define DWC3_OEVT_BDEVHNPCHNG		BIT(10)
+#define DWC3_OEVT_BDEVSESSVLDDET	BIT(9)
+#define DWC3_OEVT_BDEVVBUSCHNG		BIT(8)
+#define DWC3_OEVT_BSESSVLD		BIT(3)
+#define DWC3_OEVT_HSTNEGSTS		BIT(2)
+#define DWC3_OEVT_SESREQSTS		BIT(1)
+#define DWC3_OEVT_ERROR			BIT(0)
+
+/* OTG Event Enable Register */
+#define DWC3_OEVTEN_XHCIRUNSTPSETEN	BIT(27)
+#define DWC3_OEVTEN_DEVRUNSTPSETEN	BIT(26)
+#define DWC3_OEVTEN_HIBENTRYEN		BIT(25)
+#define DWC3_OEVTEN_CONIDSTSCHNGEN	BIT(24)
+#define DWC3_OEVTEN_HRRCONFNOTIFEN	BIT(23)
+#define DWC3_OEVTEN_HRRINITNOTIFEN	BIT(22)
+#define DWC3_OEVTEN_ADEVIDLEEN		BIT(21)
+#define DWC3_OEVTEN_ADEVBHOSTENDEN	BIT(20)
+#define DWC3_OEVTEN_ADEVHOSTEN		BIT(19)
+#define DWC3_OEVTEN_ADEVHNPCHNGEN	BIT(18)
+#define DWC3_OEVTEN_ADEVSRPDETEN	BIT(17)
+#define DWC3_OEVTEN_ADEVSESSENDDETEN	BIT(16)
+#define DWC3_OEVTEN_BDEVHOSTENDEN	BIT(11)
+#define DWC3_OEVTEN_BDEVHNPCHNGEN	BIT(10)
+#define DWC3_OEVTEN_BDEVSESSVLDDETEN	BIT(9)
+#define DWC3_OEVTEN_BDEVVBUSCHNGE	BIT(8)
+
+/* OTG Status Register */
+#define DWC3_OSTS_DEVRUNSTP		BIT(13)
+#define DWC3_OSTS_XHCIRUNSTP		BIT(12)
+#define DWC3_OSTS_PERIPHERALSTATE	BIT(4)
+#define DWC3_OSTS_XHCIPRTPOWER		BIT(3)
+#define DWC3_OSTS_BSESVLD		BIT(2)
+#define DWC3_OSTS_VBUSVLD		BIT(1)
+#define DWC3_OSTS_CONIDSTS		BIT(0)
+
 /* Structures */
 
 struct dwc3_trb;
-- 
2.5.0

  reply	other threads:[~2016-04-11 11:35 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-11 11:34 [PATCH v6 00/10] usb: dwc3: add dual-role support Roger Quadros
2016-04-11 11:34 ` Roger Quadros [this message]
2016-04-11 11:34 ` [PATCH v6 02/10] usb: dwc3: omap: Make the wrapper interrupt shared Roger Quadros
2016-04-11 12:13   ` Felipe Balbi
2016-04-11 12:51     ` Roger Quadros
2016-04-11 12:58       ` Felipe Balbi
2016-04-11 13:15         ` Roger Quadros
2016-04-11 13:20           ` Felipe Balbi
2016-04-11 11:34 ` [PATCH v6 03/10] usb: dwc3: omap: Pass VBUS and ID events transparently Roger Quadros
2016-04-11 12:18   ` Felipe Balbi
2016-04-11 13:03     ` Roger Quadros
2016-04-11 13:26       ` Felipe Balbi
2016-04-11 13:51         ` Roger Quadros
2016-04-11 11:35 ` [PATCH v6 04/10] usb: dwc3: omap: fix up error path on probe() Roger Quadros
2016-04-11 12:20   ` Felipe Balbi
2016-04-11 13:09     ` Roger Quadros
2016-04-11 11:35 ` [PATCH v6 05/10] usb: dwc3: core: cleanup IRQ resources Roger Quadros
2016-04-11 11:35 ` [PATCH v6 06/10] usb: dwc3: add dual-role support Roger Quadros
2016-04-11 11:35 ` [PATCH v6 07/10] usb: dwc3: gadget: Fix suspend/resume during dual-role mode Roger Quadros
2016-04-11 12:23   ` Felipe Balbi
2016-04-11 13:12     ` Roger Quadros
2016-04-11 13:26       ` Felipe Balbi
2016-04-11 13:53         ` Roger Quadros
2016-04-12  8:00           ` Felipe Balbi
2016-04-12  8:25             ` Roger Quadros
2016-04-11 11:35 ` [PATCH v6 08/10] usb: dwc3: core: fix PHY handling during suspend Roger Quadros
2016-04-11 12:24   ` Felipe Balbi
2016-04-11 13:13     ` Roger Quadros
2016-04-11 11:35 ` [PATCH v6 09/10] ARM: dts: dra7*-evm: Enable dual-role for usb1 Roger Quadros
2016-04-11 11:35 ` [PATCH v6 10/10] ARM: dts: am43xx: Enable dual-role on USB1 Roger Quadros

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1460374506-9779-2-git-send-email-rogerq@ti.com \
    --to=rogerq@ti.com \
    --cc=Joao.Pinto@synopsys.com \
    --cc=balbi@kernel.org \
    --cc=grygorii.strashko@ti.com \
    --cc=jun.li@freescale.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=nsekhar@ti.com \
    --cc=peter.chen@freescale.com \
    --cc=sergei.shtylyov@cogentembedded.com \
    --cc=tony@atomide.com \
    --cc=yoshihiro.shimoda.uh@renesas.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®