mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Caesar Wang <wxt@rock-chips.com>
To: edubezval@gmail.com
Cc: Heiko Stuebner <heiko@sntech.de>,
	dianders@chromium.org, briannorris@google.com,
	smbarber@google.com, linux-rockchip@lists.infradead.org,
	Caesar Wang <wxt@rock-chips.com>, Zhang Rui <rui.zhang@intel.com>,
	linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 8/9] thermal: rockchip: add the set_trips function
Date: Mon, 18 Apr 2016 11:36:00 +0800	[thread overview]
Message-ID: <1460950562-20652-9-git-send-email-wxt@rock-chips.com> (raw)
In-Reply-To: <1460950562-20652-1-git-send-email-wxt@rock-chips.com>

Whenever the current temperature is updated, the trip points immediately
below and above the current temperature are found. A sensor driver
callback `set_trips' is then called with the temperatures.
Lastly, The sensor will trigger the hardware high temperature interrupts
to increase the sampleing rate and throttle frequency to limit the
temperature rising When performing passive cooling.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Heiko Stuebner <heiko@sntech.de>
---

 drivers/thermal/rockchip_thermal.c | 39 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index 86a1ab0..39e2eec 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -96,6 +96,7 @@ struct chip_tsadc_table {
  * @initialize: SoC special initialize tsadc controller method
  * @irq_ack: clear the interrupt
  * @get_temp: get the temperature
+ * @set_alarm_temp: set the high temperature interrupt
  * @set_tshut_temp: set the hardware-controlled shutdown temperature
  * @set_tshut_mode: set the hardware-controlled shutdown mode
  * @table: the chip-specific conversion table
@@ -119,6 +120,8 @@ struct rockchip_tsadc_chip {
 	/* Per-sensor methods */
 	int (*get_temp)(struct chip_tsadc_table table,
 			int chn, void __iomem *reg, int *temp);
+	void (*set_alarm_temp)(struct chip_tsadc_table table,
+			       int chn, void __iomem *reg, int temp);
 	void (*set_tshut_temp)(struct chip_tsadc_table table,
 			       int chn, void __iomem *reg, int temp);
 	void (*set_tshut_mode)(int chn, void __iomem *reg, enum tshut_mode m);
@@ -183,6 +186,7 @@ struct rockchip_thermal_data {
 #define TSADCV2_INT_EN				0x08
 #define TSADCV2_INT_PD				0x0c
 #define TSADCV2_DATA(chn)			(0x20 + (chn) * 0x04)
+#define TSADCV2_COMP_INT(chn)		        (0x30 + (chn) * 0x04)
 #define TSADCV2_COMP_SHUT(chn)		        (0x40 + (chn) * 0x04)
 #define TSADCV2_HIGHT_INT_DEBOUNCE		0x60
 #define TSADCV2_HIGHT_TSHUT_DEBOUNCE		0x64
@@ -628,6 +632,20 @@ static int rk_tsadcv2_get_temp(struct chip_tsadc_table table,
 	return rk_tsadcv2_code_to_temp(table, val, temp);
 }
 
+static void rk_tsadcv2_alarm_temp(struct chip_tsadc_table table,
+				  int chn, void __iomem *regs, int temp)
+{
+	u32 alarm_value, int_en;
+
+	alarm_value = rk_tsadcv2_temp_to_code(table, temp);
+	writel_relaxed(alarm_value & table.data_mask,
+		       regs + TSADCV2_COMP_INT(chn));
+
+	int_en = readl_relaxed(regs + TSADCV2_INT_EN);
+	int_en |= TSADCV2_INT_SRC_EN(chn);
+	writel_relaxed(int_en, regs + TSADCV2_INT_EN);
+}
+
 static void rk_tsadcv2_tshut_temp(struct chip_tsadc_table table,
 				  int chn, void __iomem *regs, int temp)
 {
@@ -670,6 +688,7 @@ static const struct rockchip_tsadc_chip rk3228_tsadc_data = {
 	.irq_ack = rk_tsadcv3_irq_ack,
 	.control = rk_tsadcv3_control,
 	.get_temp = rk_tsadcv2_get_temp,
+	.set_alarm_temp = rk_tsadcv2_alarm_temp,
 	.set_tshut_temp = rk_tsadcv2_tshut_temp,
 	.set_tshut_mode = rk_tsadcv2_tshut_mode,
 
@@ -694,6 +713,7 @@ static const struct rockchip_tsadc_chip rk3288_tsadc_data = {
 	.irq_ack = rk_tsadcv2_irq_ack,
 	.control = rk_tsadcv2_control,
 	.get_temp = rk_tsadcv2_get_temp,
+	.set_alarm_temp = rk_tsadcv2_alarm_temp,
 	.set_tshut_temp = rk_tsadcv2_tshut_temp,
 	.set_tshut_mode = rk_tsadcv2_tshut_mode,
 
@@ -718,6 +738,7 @@ static const struct rockchip_tsadc_chip rk3366_tsadc_data = {
 	.irq_ack = rk_tsadcv3_irq_ack,
 	.control = rk_tsadcv3_control,
 	.get_temp = rk_tsadcv2_get_temp,
+	.set_alarm_temp = rk_tsadcv2_alarm_temp,
 	.set_tshut_temp = rk_tsadcv2_tshut_temp,
 	.set_tshut_mode = rk_tsadcv2_tshut_mode,
 
@@ -742,6 +763,7 @@ static const struct rockchip_tsadc_chip rk3368_tsadc_data = {
 	.irq_ack = rk_tsadcv2_irq_ack,
 	.control = rk_tsadcv2_control,
 	.get_temp = rk_tsadcv2_get_temp,
+	.set_alarm_temp = rk_tsadcv2_alarm_temp,
 	.set_tshut_temp = rk_tsadcv2_tshut_temp,
 	.set_tshut_mode = rk_tsadcv2_tshut_mode,
 
@@ -766,6 +788,7 @@ static const struct rockchip_tsadc_chip rk3399_tsadc_data = {
 	.irq_ack = rk_tsadcv3_irq_ack,
 	.control = rk_tsadcv3_control,
 	.get_temp = rk_tsadcv2_get_temp,
+	.set_alarm_temp = rk_tsadcv2_alarm_temp,
 	.set_tshut_temp = rk_tsadcv2_tshut_temp,
 	.set_tshut_mode = rk_tsadcv2_tshut_mode,
 
@@ -826,6 +849,21 @@ static irqreturn_t rockchip_thermal_alarm_irq_thread(int irq, void *dev)
 	return IRQ_HANDLED;
 }
 
+static int rockchip_thermal_set_trips(void *_sensor, int low, int high)
+{
+	struct rockchip_thermal_sensor *sensor = _sensor;
+	struct rockchip_thermal_data *thermal = sensor->thermal;
+	const struct rockchip_tsadc_chip *tsadc = thermal->chip;
+
+	dev_dbg(&thermal->pdev->dev, "%s: sensor %d: low: %d, high %d\n",
+		__func__, sensor->id, low, high);
+
+	tsadc->set_alarm_temp(tsadc->table,
+			      sensor->id, thermal->regs, high);
+
+	return 0;
+}
+
 static int rockchip_thermal_get_temp(void *_sensor, int *out_temp)
 {
 	struct rockchip_thermal_sensor *sensor = _sensor;
@@ -843,6 +881,7 @@ static int rockchip_thermal_get_temp(void *_sensor, int *out_temp)
 
 static const struct thermal_zone_of_device_ops rockchip_of_thermal_ops = {
 	.get_temp = rockchip_thermal_get_temp,
+	.set_trips = rockchip_thermal_set_trips,
 };
 
 static int rockchip_configure_from_dt(struct device *dev,
-- 
1.9.1

  parent reply	other threads:[~2016-04-18  3:38 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-18  3:35 [PATCH 0/9] thermal: rockchip: Support rk3366/rk3399 SoCS and fixes the driver Caesar Wang
2016-04-18  3:35 ` [PATCH 1/9] thermal: rockchip: disable thermal->clk in err case Caesar Wang
2016-04-18  3:35 ` [PATCH 2/9] thermal: rockchip: fixes the code_to_temp for tsadc driver Caesar Wang
2016-04-18  3:35 ` [PATCH 3/9] thermal: rockchip: update the tsadc table for rk3399 Caesar Wang
2016-04-18  3:35 ` [PATCH 4/9] thermal: rockchip: handle the power sequence for tsadc controller Caesar Wang
2016-04-27 23:48   ` Eduardo Valentin
     [not found]     ` <57216C65.5040501@gmail.com>
2016-04-28 15:04       ` Eduardo Valentin
2016-05-03  2:27         ` Caesar Wang
2016-04-18  3:35 ` [PATCH 5/9] thermal: rockchip: Support RK3366 SoCs in the thermal driver Caesar Wang
2016-04-18  3:35 ` [PATCH 6/9] thermal: rockchip: add the notes for better reading Caesar Wang
2016-04-18  3:35 ` [PATCH 7/9] thermal: of: Add support for hardware-tracked trip points Caesar Wang
2016-04-20 23:48   ` Eduardo Valentin
2016-04-21  1:12     ` Brian Norris
2016-04-22  1:54       ` Caesar Wang
2016-04-22  5:41         ` Sascha Hauer
2016-04-22 10:17           ` Caesar Wang
2016-04-27 21:50             ` Eduardo Valentin
2016-04-18  3:36 ` Caesar Wang [this message]
2016-04-18  3:36 ` [PATCH 9/9] arm64: dts: rockchip: move the rk3368 thermal data into rk3368.dtsi Caesar Wang
2016-04-22  8:18   ` Heiko Stübner
2016-04-27 23:52 ` [PATCH 0/9] thermal: rockchip: Support rk3366/rk3399 SoCS and fixes the driver Eduardo Valentin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1460950562-20652-9-git-send-email-wxt@rock-chips.com \
    --to=wxt@rock-chips.com \
    --cc=briannorris@google.com \
    --cc=dianders@chromium.org \
    --cc=edubezval@gmail.com \
    --cc=heiko@sntech.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=rui.zhang@intel.com \
    --cc=smbarber@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome