From: "Rafał Miłecki" <zajec5@gmail.com>
To: Florian Fainelli <f.fainelli@gmail.com>
Cc: "Rafał Miłecki" <zajec5@gmail.com>,
"Hauke Mehrtens" <hauke@hauke-m.de>,
"Rob Herring" <robh+dt@kernel.org>,
"Pawel Moll" <pawel.moll@arm.com>,
"Mark Rutland" <mark.rutland@arm.com>,
"Ian Campbell" <ijc+devicetree@hellion.org.uk>,
"Kumar Gala" <galak@codeaurora.org>,
"Russell King" <linux@arm.linux.org.uk>,
linux-arm-kernel@lists.infradead.org (open list:BROADCOM
BCM5301X ARM ARCHITECTURE),
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS),
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH] ARM: BCM5301X: Add DT entry for SPI controller and NOR flash
Date: Tue, 19 Apr 2016 08:56:46 +0200 [thread overview]
Message-ID: <1461049006-22818-1-git-send-email-zajec5@gmail.com> (raw)
Controller is present on every BCM4708* board but only few devices have
serial flash attached so mark it as disabled by default.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 4 ++++
arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 4 ++++
arch/arm/boot/dts/bcm5301x.dtsi | 14 ++++++++++++++
3 files changed, 22 insertions(+)
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
index c973f768..1c7e53d 100644
--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
@@ -59,3 +59,7 @@
&uart0 {
status = "okay";
};
+
+&spi_nor {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
index 4d610ff..8b0c440 100644
--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
@@ -122,3 +122,7 @@
&uart0 {
status = "okay";
};
+
+&spi_nor {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index 9c06d91..7d4d29b 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -225,6 +225,20 @@
#address-cells = <1>;
#size-cells = <1>;
};
+
+ spi@29000 {
+ reg = <0x00029000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ spi_nor: spi-nor@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ linux,part-probe = "ofpart", "bcm47xxpart";
+ status = "disabled";
+ };
+ };
};
lcpll0: lcpll0@1800c100 {
--
1.8.4.5
next reply other threads:[~2016-04-19 6:57 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-19 6:56 Rafał Miłecki [this message]
2016-04-22 19:01 ` Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1461049006-22818-1-git-send-email-zajec5@gmail.com \
--to=zajec5@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=galak@codeaurora.org \
--cc=hauke@hauke-m.de \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome