mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Peter Griffin <peter.griffin@linaro.org>
To: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, srinivas.kandagatla@gmail.com,
	maxime.coquelin@st.com, patrice.chotard@st.com,
	vinod.koul@intel.com
Cc: peter.griffin@linaro.org, lee.jones@linaro.org,
	dmaengine@vger.kernel.org, devicetree@vger.kernel.org,
	arnd@arndb.de, broonie@kernel.org, ludovic.barre@st.com
Subject: [PATCH 02/18] dmaengine: st_fdma:  Add STMicroelectronics FDMA driver header file
Date: Thu, 21 Apr 2016 12:04:19 +0100	[thread overview]
Message-ID: <1461236675-10176-3-git-send-email-peter.griffin@linaro.org> (raw)
In-Reply-To: <1461236675-10176-1-git-send-email-peter.griffin@linaro.org>

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
---
 drivers/dma/st_fdma.h | 281 ++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 281 insertions(+)
 create mode 100644 drivers/dma/st_fdma.h

diff --git a/drivers/dma/st_fdma.h b/drivers/dma/st_fdma.h
new file mode 100644
index 0000000..746aee0
--- /dev/null
+++ b/drivers/dma/st_fdma.h
@@ -0,0 +1,281 @@
+/*
+ * st_fdma.h
+ *
+ * Copyright (C) 2014 STMicroelectronics
+ * Author: Ludovic Barre <Ludovic.barre@st.com>
+ * License terms:  GNU General Public License (GPL), version 2
+ */
+#ifndef __DMA_ST_FDMA_H
+#define __DMA_ST_FDMA_H
+
+#include <linux/dmaengine.h>
+#include <linux/interrupt.h>
+
+#include "virt-dma.h"
+
+#define ST_FDMA_NR_DREQS 32
+#define EM_SLIM	102	/* No official SLIM ELF ID */
+#define FW_NAME_SIZE 30
+
+enum {
+	CLK_SLIM,
+	CLK_HI,
+	CLK_LOW,
+	CLK_IC,
+	CLK_MAX_NUM,
+};
+
+#define NAME_SZ 10
+
+struct st_fdma_ram {
+	char name[NAME_SZ];
+	u32 offset;
+	u32 size;
+};
+
+/**
+ * struct st_fdma_generic_node - Free running/paced generic node
+ *
+ * @length: Length in bytes of a line in a 2D mem to mem
+ * @sstride: Stride, in bytes, between source lines in a 2D data move
+ * @dstride: Stride, in bytes, between destination lines in a 2D data move
+ */
+struct st_fdma_generic_node {
+	u32 length;
+	u32 sstride;
+	u32 dstride;
+};
+
+/**
+ * struct st_fdma_hw_node - Node structure used by fdma hw
+ *
+ * @next: Pointer to next node
+ * @control: Transfer Control Parameters
+ * @nbytes: Number of Bytes to read
+ * @saddr: Source address
+ * @daddr: Destination address
+ *
+ * @generic: generic node for free running/paced transfert type
+ * 2 others transfert type are possible, but not yet implemented
+ *
+ * The NODE structures must be aligned to a 32 byte boundary
+ */
+struct st_fdma_hw_node {
+	u32 next;
+	u32 control;
+	u32 nbytes;
+	u32 saddr;
+	u32 daddr;
+	union {
+		struct st_fdma_generic_node generic;
+	};
+} __aligned(32);
+
+/*
+ * node control parameters
+ */
+#define NODE_CTRL_REQ_MAP_MASK		GENMASK(4, 0)
+#define NODE_CTRL_REQ_MAP_FREE_RUN	0x0
+#define NODE_CTRL_REQ_MAP_DREQ(n)	((n) & NODE_CTRL_REQ_MAP_MASK)
+#define NODE_CTRL_REQ_MAP_EXT		NODE_CTRL_REQ_MAP_MASK
+#define NODE_CTRL_SRC_MASK		GENMASK(6, 5)
+#define NODE_CTRL_SRC_STATIC		BIT(5)
+#define NODE_CTRL_SRC_INCR		BIT(6)
+#define NODE_CTRL_DST_MASK		GENMASK(8, 7)
+#define NODE_CTRL_DST_STATIC		BIT(7)
+#define NODE_CTRL_DST_INCR		BIT(8)
+#define NODE_CTRL_SECURE		BIT(15)
+#define NODE_CTRL_PAUSE_EON		BIT(30)
+#define NODE_CTRL_INT_EON		BIT(31)
+
+/**
+ * struct st_fdma_sw_node - descriptor structure for link list
+ *
+ * @pdesc: Physical address of desc
+ * @node: link used for putting this into a channel queue
+ */
+struct st_fdma_sw_node {
+	dma_addr_t pdesc;
+	struct st_fdma_hw_node *desc;
+};
+
+struct st_fdma_driverdata {
+	const struct st_fdma_ram *fdma_mem;
+	u32 num_mem;
+	u32 id;
+	char name[NAME_SZ];
+};
+
+struct st_fdma_desc {
+	struct virt_dma_desc vdesc;
+	struct st_fdma_chan *fchan;
+	bool iscyclic;
+	unsigned int n_nodes;
+	struct st_fdma_sw_node node[];
+};
+
+enum st_fdma_type {
+	ST_FDMA_TYPE_FREE_RUN,
+	ST_FDMA_TYPE_PACED,
+};
+
+struct st_fdma_cfg {
+	struct device_node *of_node;
+	enum st_fdma_type type;
+	dma_addr_t dev_addr;
+	enum dma_transfer_direction dir;
+	int req_line; /* request line */
+	long req_ctrl; /* Request control */
+};
+
+struct st_fdma_chan {
+	struct st_fdma_dev *fdev;
+	struct dma_pool *node_pool;
+	struct dma_slave_config scfg;
+	struct st_fdma_cfg cfg;
+
+	int dreq_line;
+
+	struct virt_dma_chan vchan;
+	struct st_fdma_desc *fdesc;
+	enum dma_status	status;
+};
+
+struct st_fdma_dev {
+	struct device *dev;
+	const struct st_fdma_driverdata *drvdata;
+	struct dma_device dma_device;
+
+	void __iomem *io_base;
+	struct resource *io_res;
+	struct clk *clks[CLK_MAX_NUM];
+
+	struct st_fdma_chan *chans;
+
+	spinlock_t dreq_lock;
+	unsigned long dreq_mask;
+
+	u32 nr_channels;
+	char fw_name[FW_NAME_SIZE];
+
+	atomic_t fw_loaded;
+};
+
+/* Registers*/
+/* FDMA interface */
+#define FDMA_ID_OFST		0x00000
+#define FDMA_VER_OFST		0x00004
+
+#define FDMA_EN_OFST		0x00008
+#define FDMA_EN_RUN			BIT(0)
+
+#define FDMA_CLK_GATE_OFST	0x0000C
+#define FDMA_CLK_GATE_DIS		BIT(0)
+#define FDMA_CLK_GATE_RESET		BIT(2)
+
+#define FDMA_SLIM_PC_OFST	0x00020
+
+#define FDMA_REV_ID_OFST	0x10000
+#define FDMA_REV_ID_MIN_MASK		GENMASK(15, 8)
+#define FDMA_REV_ID_MIN(id)		((id & FDMA_REV_ID_MIN_MASK) >> 8)
+#define FDMA_REV_ID_MAJ_MASK		GENMASK(23, 16)
+#define FDMA_REV_ID_MAJ(id)		((id & FDMA_REV_ID_MAJ_MASK) >> 16)
+
+#define FDMA_STBUS_SYNC_OFST	0x17F88
+#define FDMA_STBUS_SYNC_DIS		BIT(0)
+
+#define FDMA_CMD_STA_OFST	0x17FC0
+#define FDMA_CMD_SET_OFST	0x17FC4
+#define FDMA_CMD_CLR_OFST	0x17FC8
+#define FDMA_CMD_MASK_OFST	0x17FCC
+#define FDMA_CMD_START(ch)		(0x1 << (ch << 1))
+#define FDMA_CMD_PAUSE(ch)		(0x2 << (ch << 1))
+#define FDMA_CMD_FLUSH(ch)		(0x3 << (ch << 1))
+
+#define FDMA_INT_STA_OFST	0x17FD0
+#define FDMA_INT_STA_CH			0x1
+#define FDMA_INT_STA_ERR		0x2
+
+#define FDMA_INT_SET_OFST	0x17FD4
+#define FDMA_INT_CLR_OFST	0x17FD8
+#define FDMA_INT_MASK_OFST	0x17FDC
+
+#define fdma_read(fdev, name) \
+	readl_relaxed((fdev)->io_base + FDMA_##name##_OFST)
+
+#define fdma_write(fdev, val, name) \
+	writel_relaxed((val), (fdev)->io_base + FDMA_##name##_OFST)
+
+/* fchan interface */
+#define FDMA_CH_CMD_OFST	0x10200
+#define FDMA_CH_CMD_STA_MASK		GENMASK(1, 0)
+#define FDMA_CH_CMD_STA_IDLE		(0x0)
+#define FDMA_CH_CMD_STA_START		(0x1)
+#define FDMA_CH_CMD_STA_RUNNING		(0x2)
+#define FDMA_CH_CMD_STA_PAUSED		(0x3)
+#define FDMA_CH_CMD_ERR_MASK		GENMASK(4, 2)
+#define FDMA_CH_CMD_ERR_INT		(0x0 << 2)
+#define FDMA_CH_CMD_ERR_NAND		(0x1 << 2)
+#define FDMA_CH_CMD_ERR_MCHI		(0x2 << 2)
+#define FDMA_CH_CMD_DATA_MASK		GENMASK(31, 5)
+#define fchan_read(fchan, name) \
+	readl_relaxed((fchan)->fdev->io_base \
+			+ (fchan)->vchan.chan.chan_id * 0x4 \
+			+ FDMA_##name##_OFST)
+
+#define fchan_write(fchan, val, name) \
+	writel_relaxed((val), (fchan)->fdev->io_base \
+			+ (fchan)->vchan.chan.chan_id * 0x4 \
+			+ FDMA_##name##_OFST)
+
+/* req interface */
+#define FDMA_REQ_CTRL_OFST	0x10240
+#define dreq_write(fchan, val, name) \
+	writel_relaxed((val), (fchan)->fdev->io_base \
+			+ fchan->dreq_line * 0x04 \
+			+ FDMA_##name##_OFST)
+/* node interface */
+#define FDMA_NODE_SZ 128
+#define FDMA_PTRN_OFST		0x10800
+#define FDMA_CNTN_OFST		0x10808
+#define FDMA_SADDRN_OFST	0x1080c
+#define FDMA_DADDRN_OFST	0x10810
+#define fnode_read(fchan, name) \
+	readl_relaxed((fchan)->fdev->io_base \
+			+ (fchan)->vchan.chan.chan_id * FDMA_NODE_SZ \
+			+ FDMA_##name##_OFST)
+
+#define fnode_write(fchan, val, name) \
+	writel_relaxed((val), (fchan)->fdev->io_base \
+			+ (fchan)->vchan.chan.chan_id * FDMA_NODE_SZ \
+			+ FDMA_##name##_OFST)
+
+/*
+ * request control bits
+ */
+#define REQ_CTRL_NUM_OPS_MASK		GENMASK(31, 24)
+#define REQ_CTRL_NUM_OPS(n)		(REQ_CTRL_NUM_OPS_MASK & ((n) << 24))
+#define REQ_CTRL_INITIATOR_MASK		BIT(22)
+#define	REQ_CTRL_INIT0			(0x0 << 22)
+#define	REQ_CTRL_INIT1			(0x1 << 22)
+#define REQ_CTRL_INC_ADDR_ON		BIT(21)
+#define REQ_CTRL_DATA_SWAP_ON		BIT(17)
+#define REQ_CTRL_WNR			BIT(14)
+#define REQ_CTRL_OPCODE_MASK		GENMASK(7, 4)
+#define REQ_CTRL_OPCODE_LD_ST1		(0x0 << 4)
+#define REQ_CTRL_OPCODE_LD_ST2		(0x1 << 4)
+#define REQ_CTRL_OPCODE_LD_ST4		(0x2 << 4)
+#define REQ_CTRL_OPCODE_LD_ST8		(0x3 << 4)
+#define REQ_CTRL_OPCODE_LD_ST16		(0x4 << 4)
+#define REQ_CTRL_OPCODE_LD_ST32		(0x5 << 4)
+#define REQ_CTRL_OPCODE_LD_ST64		(0x6 << 4)
+#define REQ_CTRL_HOLDOFF_MASK		GENMASK(2, 0)
+#define REQ_CTRL_HOLDOFF(n)		((n) & REQ_CTRL_HOLDOFF_MASK)
+
+/* bits used by client to configure request control */
+#define REQ_CTRL_CFG_MASK (REQ_CTRL_HOLDOFF_MASK | REQ_CTRL_DATA_SWAP_ON \
+			| REQ_CTRL_INC_ADDR_ON | REQ_CTRL_INITIATOR_MASK)
+
+bool st_fdma_filter_fn(struct dma_chan *chan, void *param);
+
+#endif	/* __DMA_ST_FDMA_H */
-- 
1.9.1

  parent reply	other threads:[~2016-04-21 11:04 UTC|newest]

Thread overview: 53+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-21 11:04 [PATCH 00/18] Add support for FDMA DMA controller found on STi chipsets Peter Griffin
2016-04-21 11:04 ` [PATCH 01/18] dmaengine: st_fdma: Add STMicroelectronics FDMA DT binding documentation Peter Griffin
2016-04-21 11:25   ` Arnd Bergmann
2016-04-26 12:00     ` Peter Griffin
2016-04-21 11:04 ` Peter Griffin [this message]
2016-04-21 11:20   ` [PATCH 02/18] dmaengine: st_fdma: Add STMicroelectronics FDMA driver header file Arnd Bergmann
2016-04-21 11:04 ` [PATCH 03/18] dmaengine: st_fdma: Add STMicroelectronics FDMA engine driver support Peter Griffin
2016-04-21 11:24   ` Arnd Bergmann
2016-04-21 11:26   ` Appana Durga Kedareswara Rao
2016-04-21 14:58     ` Peter Griffin
2016-04-25  9:04     ` Lee Jones
2016-04-26 16:56   ` Vinod Koul
2016-04-27 12:59     ` Peter Griffin
2016-05-02  9:30       ` Vinod Koul
2016-05-09 17:30         ` Peter Griffin
2016-04-21 11:04 ` [PATCH 04/18] dmaengine: st_fdma: Add xp70 firmware loading mechanism Peter Griffin
2016-04-26 17:00   ` Vinod Koul
2016-05-11  7:57     ` Peter Griffin
2016-05-12  5:40       ` Vinod Koul
2016-04-21 11:04 ` [PATCH 05/18] dmaengine: st_fdma: Add fdma suspend and resume callbacks Peter Griffin
2016-04-21 11:04 ` [PATCH 06/18] ARM: STi: DT: STiH407: Add FDMA driver dt nodes Peter Griffin
2016-04-21 11:04 ` [PATCH 07/18] MAINTAINERS: Add FDMA driver files to STi section Peter Griffin
2016-04-21 11:04 ` [PATCH 08/18] ARM: multi_v7_defconfig: Enable STi FDMA driver Peter Griffin
2016-04-21 11:25   ` Arnd Bergmann
2016-04-26 10:42     ` Peter Griffin
2016-04-21 11:04 ` [PATCH 09/18] ASoC: sti: Update DT example to match the driver code Peter Griffin
2016-04-21 11:27   ` Arnd Bergmann
2016-04-26 10:11     ` Peter Griffin
2016-04-26 10:58       ` Arnd Bergmann
2016-04-26 11:15         ` Peter Griffin
2016-04-26 11:44           ` Arnd Bergmann
2016-05-04  7:52             ` Arnaud Pouliquen
2016-05-04  9:05               ` Arnd Bergmann
2016-04-21 15:57   ` Mark Brown
2016-04-26 11:02     ` Peter Griffin
2016-05-03 15:46       ` Arnaud Pouliquen
2016-04-21 11:04 ` [PATCH 10/18] ASoC: sti: Update example to include assigned-clocks and mclk-fs Peter Griffin
2016-04-21 15:49   ` Mark Brown
2016-04-26 11:52     ` Peter Griffin
2016-04-26 14:23       ` Mark Brown
2016-04-26 14:51         ` Peter Griffin
2016-04-26 15:03           ` Mark Brown
2016-04-26 16:14             ` Peter Griffin
2016-04-26 16:41               ` Mark Brown
2016-04-26 17:49                 ` Peter Griffin
2016-04-21 11:04 ` [PATCH 11/18] ARM: multi_v7_defconfig: Enable STi and simple-card drivers Peter Griffin
2016-04-21 11:04 ` [PATCH 12/18] ARM: DT: STiH407: Add i2s_out pinctrl configuration Peter Griffin
2016-04-21 11:04 ` [PATCH 13/18] ARM: DT: STiH407: Add i2s_in " Peter Griffin
2016-04-21 11:04 ` [PATCH 14/18] ARM: DT: STiH407: Add spdif_out pinctrl config Peter Griffin
2016-04-21 11:04 ` [PATCH 15/18] ARM: STi: DT: STiH407: Add sti-sasg-codec dt node Peter Griffin
2016-04-21 11:04 ` [PATCH 16/18] ARM: STi: DT: STiH407: Add uniperif player dt nodes Peter Griffin
2016-04-21 11:04 ` [PATCH 17/18] ARM: STi: DT: STiH407: Add uniperif reader " Peter Griffin
2016-04-21 11:04 ` [PATCH 18/18] ARM: DT: STi: stihxxx-b2120: Add DT nodes for STi audio card Peter Griffin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1461236675-10176-3-git-send-email-peter.griffin@linaro.org \
    --to=peter.griffin@linaro.org \
    --cc=arnd@arndb.de \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmaengine@vger.kernel.org \
    --cc=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ludovic.barre@st.com \
    --cc=maxime.coquelin@st.com \
    --cc=patrice.chotard@st.com \
    --cc=srinivas.kandagatla@gmail.com \
    --cc=vinod.koul@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome