From: Akshay Bhat <akshay.bhat@timesys.com>
To: p.zabel@pengutronix.de
Cc: airlied@linux.ie, dri-devel@lists.freedesktop.org,
linux-kernel@vger.kernel.org,
Steve Longerbeam <steve_longerbeam@mentor.com>,
Akshay Bhat <akshay.bhat@timesys.com>
Subject: [PATCH v2] drm/imx: imx-ldb: Add DDC support
Date: Tue, 26 Apr 2016 13:40:30 -0400 [thread overview]
Message-ID: <1461692430-3976-1-git-send-email-akshay.bhat@timesys.com> (raw)
From: Steve Longerbeam <steve_longerbeam@mentor.com>
Add support for reading EDID over Display Data Channel. If no DDC
adapter is available, falls back to hardcoded EDID or display-timings
node as before.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
---
Hi Philipp,
I found this patch to add DDC support to imx-ldb at:
https://patchwork.kernel.org/patch/5207231/
Looks like it never made it to the upstream kernel.
I have rebased this on 4.6-rc5 and tested the same.
Thanks,
Akshay
v1 -> v2:
Rebase to 4.6-rc5
Add check for channel->panel before fallback to display-timings node
drivers/gpu/drm/imx/imx-ldb.c | 38 ++++++++++++++++++++++++++++++--------
1 file changed, 30 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/imx/imx-ldb.c b/drivers/gpu/drm/imx/imx-ldb.c
index a58eee5..67706c9 100644
--- a/drivers/gpu/drm/imx/imx-ldb.c
+++ b/drivers/gpu/drm/imx/imx-ldb.c
@@ -59,6 +59,7 @@ struct imx_ldb_channel {
struct drm_encoder encoder;
struct drm_panel *panel;
struct device_node *child;
+ struct i2c_adapter *ddc;
int chno;
void *edid;
int edid_len;
@@ -107,6 +108,9 @@ static int imx_ldb_connector_get_modes(struct drm_connector *connector)
return num_modes;
}
+ if (!imx_ldb_ch->edid && imx_ldb_ch->ddc)
+ imx_ldb_ch->edid = drm_get_edid(connector, imx_ldb_ch->ddc);
+
if (imx_ldb_ch->edid) {
drm_mode_connector_update_edid_property(connector,
imx_ldb_ch->edid);
@@ -554,6 +558,7 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data)
for_each_child_of_node(np, child) {
struct imx_ldb_channel *channel;
struct device_node *port;
+ struct device_node *ddc_node;
ret = of_property_read_u32(child, "reg", &i);
if (ret || i < 0 || i > 1)
@@ -595,14 +600,30 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data)
}
}
- edidp = of_get_property(child, "edid", &channel->edid_len);
- if (edidp) {
- channel->edid = kmemdup(edidp, channel->edid_len,
- GFP_KERNEL);
- } else if (!channel->panel) {
- ret = of_get_drm_display_mode(child, &channel->mode, 0);
- if (!ret)
- channel->mode_valid = 1;
+ ddc_node = of_parse_phandle(child, "ddc-i2c-bus", 0);
+ if (ddc_node) {
+ channel->ddc = of_find_i2c_adapter_by_node(ddc_node);
+ of_node_put(ddc_node);
+ }
+
+ if (!channel->ddc) {
+ /* if no DDC available, fallback to hardcoded EDID */
+ dev_dbg(dev, "no ddc available\n");
+
+ edidp = of_get_property(child, "edid",
+ &channel->edid_len);
+ if (edidp) {
+ channel->edid = kmemdup(edidp,
+ channel->edid_len,
+ GFP_KERNEL);
+ } else if (!channel->panel) {
+ /* fallback to display-timings node */
+ ret = of_get_drm_display_mode(child,
+ &channel->mode,
+ 0);
+ if (!ret)
+ channel->mode_valid = 1;
+ }
}
channel->bus_format = of_get_bus_format(dev, child);
@@ -647,6 +668,7 @@ static void imx_ldb_unbind(struct device *dev, struct device *master,
channel->encoder.funcs->destroy(&channel->encoder);
kfree(channel->edid);
+ i2c_put_adapter(channel->ddc);
}
}
--
2.8.1
next reply other threads:[~2016-04-26 17:41 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-26 17:40 Akshay Bhat [this message]
2016-04-27 9:14 ` Philipp Zabel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1461692430-3976-1-git-send-email-akshay.bhat@timesys.com \
--to=akshay.bhat@timesys.com \
--cc=airlied@linux.ie \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=steve_longerbeam@mentor.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®