From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S934504AbcECRh2 (ORCPT ); Tue, 3 May 2016 13:37:28 -0400 Received: from s15-gw103.mycloudmailbox.com ([207.126.101.40]:57006 "EHLO S15-GW103.mycloudmailbox.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S934167AbcECRhW (ORCPT ); Tue, 3 May 2016 13:37:22 -0400 X-Greylist: delayed 542 seconds by postgrey-1.27 at vger.kernel.org; Tue, 03 May 2016 13:37:22 EDT From: Dan Haab To: Florian Fainelli CC: Dan Haab , "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" , "moderated list:ARM PORT" , open list Subject: [PATCH] ARM: BCM5301X: Add DT for Luxul XAP-1510 Date: Tue, 3 May 2016 11:28:16 -0600 Message-ID: <1462296501-5209-1-git-send-email-dhaab@luxul.com> X-Mailer: git-send-email 1.7.9.5 MIME-Version: 1.0 Content-Type: text/plain X-Originating-IP: [10.40.130.234] X-ClientProxiedBy: S12-CAS102.S12.local (10.40.128.91) To S12-MBX11-14.S12.local (10.40.128.43) X-RoutingAgent: Treated X-CrossPremisesHeadersFilteredBySendConnector: S15-MBX101.S15.local X-OrganizationHeadersPreserved: S15-MBX101.S15.local Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Luxul XAP-1510 is an AP device based on BCM4708 SoC. It uses flash memory connected to the SPI controller. Signed-off-by: Dan Haab --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 67 ++++++++++++++++++++++++++ 2 files changed, 68 insertions(+) create mode 100644 arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 95c1923..c499d09 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -71,6 +71,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4708-asus-rt-ac56u.dtb \ bcm4708-asus-rt-ac68u.dtb \ bcm4708-buffalo-wzr-1750dhp.dtb \ + bcm4708-luxul-xap-1510.dtb \ bcm4708-luxul-xwc-1000.dtb \ bcm4708-netgear-r6250.dtb \ bcm4708-netgear-r6300-v2.dtb \ diff --git a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts new file mode 100644 index 0000000..f4460b5 --- /dev/null +++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts @@ -0,0 +1,67 @@ +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Luxul XAP-1510 + * + * Copyright 2015 Luxul Inc. + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" + +/ { + compatible = "luxul,xap-1510v1", "brcm,bcm4708"; + model = "Luxul XAP-1510 V1"; + + chosen { + bootargs = "console=ttyS0,115200 earlycon"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + 5ghz { + label = "bcm53xx:blue:5ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + 2ghz { + label = "bcm53xx:blue:2ghz"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&spi_nor { + status = "okay"; +}; -- 1.7.9.5