From: Yuyang Du <yuyang.du@intel.com>
To: peterz@infradead.org, mingo@kernel.org, linux-kernel@vger.kernel.org
Cc: bsegall@google.com, pjt@google.com, morten.rasmussen@arm.com,
vincent.guittot@linaro.org, dietmar.eggemann@arm.com,
juri.lelli@arm.com, Yuyang Du <yuyang.du@intel.com>
Subject: [PATCH v3 09/12] sched/fair: Add introduction to the sched average metrics
Date: Wed, 4 May 2016 04:02:50 +0800 [thread overview]
Message-ID: <1462305773-7832-10-git-send-email-yuyang.du@intel.com> (raw)
In-Reply-To: <1462305773-7832-1-git-send-email-yuyang.du@intel.com>
These sched metrics have become complex enough. We introduce them
at their definitions.
Signed-off-by: Yuyang Du <yuyang.du@intel.com>
---
include/linux/sched.h | 60 ++++++++++++++++++++++++++++++++++++++++---------
1 file changed, 49 insertions(+), 11 deletions(-)
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 33e7929..a7cddd6 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1211,18 +1211,56 @@ struct load_weight {
};
/*
- * The load_avg/util_avg accumulates an infinite geometric series.
- * 1) load_avg factors frequency scaling into the amount of time that a
- * sched_entity is runnable on a rq into its weight. For cfs_rq, it is the
- * aggregated such weights of all runnable and blocked sched_entities.
- * 2) util_avg factors frequency and cpu capacity scaling into the amount of time
- * that a sched_entity is running on a CPU, in the range [0..SCHED_CAPACITY_SCALE].
- * For cfs_rq, it is the aggregated such times of all runnable and
+ * The load_avg/util_avg accumulates an infinite geometric series
+ * (see __update_sched_avg() in kernel/sched/fair.c).
+ *
+ * [load_avg definition]
+ *
+ * load_avg = runnable% * scale_load_down(load)
+ *
+ * where runnable% is the time ratio that a sched_entity is runnable.
+ * For cfs_rq, it is the aggregated such load_avg of all runnable and
* blocked sched_entities.
- * The 64 bit load_sum can:
- * 1) for cfs_rq, afford 4353082796 (=2^64/47742/88761) entities with
- * the highest weight (=88761) always runnable, we should not overflow
- * 2) for entity, support any load.weight always runnable
+ *
+ * load_avg may also take frequency scaling into account:
+ *
+ * load_avg = runnable% * scale_load_down(load) * freq%
+ *
+ * where freq% is the CPU frequency normalize to the highest frequency
+ *
+ * [util_avg definition]
+ *
+ * util_avg = running% * SCHED_CAPACITY_SCALE
+ *
+ * where running% is the time ratio that a sched_entity is running on
+ * a CPU. For cfs_rq, it is the aggregated such util_avg of all runnable
+ * and blocked sched_entities.
+ *
+ * util_avg may also factor frequency scaling and CPU capacity scaling:
+ *
+ * util_avg = running% * SCHED_CAPACITY_SCALE * freq% * capacity%
+ *
+ * where freq% is the same as above, and capacity% is the CPU capacity
+ * normalized to the greatest capacity (due to uarch differences, etc).
+ *
+ * N.B., the above ratios (runnable%, running%, freq%, and capacity%)
+ * themselves are in the range of [0, 1]. To do fixed point arithmetic,
+ * we therefore scale them to as large range as necessary. This is for
+ * example reflected by util_avg's SCHED_CAPACITY_SCALE.
+ *
+ * [Overflow issue]
+ *
+ * The 64bit load_sum can have 4353082796 (=2^64/47742/88761) entities
+ * with the highest load (=88761) always runnable on a single cfs_rq, we
+ * should not overflow as the number already hits PID_MAX_LIMIT.
+ *
+ * For all other cases (including 32bit kernel), struct load_weight's
+ * weight will overflow first before we do, because:
+ *
+ * Max(load_avg) <= Max(load.weight)
+ *
+ * Then, it is the load_weight's responsibility to consider overflow
+ * issues.
*/
struct sched_avg {
u64 last_update_time, load_sum;
--
1.7.9.5
next prev parent reply other threads:[~2016-05-04 3:45 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-03 20:02 [PATCH v3 00/12] sched/fair: Optimize and clean up sched averages Yuyang Du
2016-05-03 20:02 ` [PATCH v3 01/12] sched/fair: Optimize sum computation with a lookup table Yuyang Du
2016-05-03 20:02 ` [PATCH v3 02/12] sched/fair: Rename variable names for sched averages Yuyang Du
2016-05-03 20:02 ` [PATCH v3 03/12] sched/fair: Change the variable to hold the number of periods to 32bit Yuyang Du
2016-05-05 11:13 ` Morten Rasmussen
2016-05-05 11:23 ` Vincent Guittot
2016-05-05 18:19 ` Yuyang Du
2016-05-10 9:10 ` Morten Rasmussen
2016-05-10 2:05 ` Yuyang Du
2016-05-03 20:02 ` [PATCH v3 04/12] sched/fair: Add __always_inline compiler attribute to __accumulate_sum() Yuyang Du
2016-05-03 20:02 ` [PATCH v3 05/12] sched/fair: Optimize __update_sched_avg() Yuyang Du
2016-05-10 8:46 ` Morten Rasmussen
2016-05-10 2:27 ` Yuyang Du
2016-05-03 20:02 ` [PATCH v3 06/12] documentation: Add scheduler/sched-avg.txt Yuyang Du
2016-05-03 20:02 ` [PATCH v3 07/12] sched/fair: Generalize the load/util averages resolution definition Yuyang Du
2016-05-03 20:02 ` [PATCH v3 08/12] sched/fair: Remove SCHED_LOAD_SHIFT and SCHED_LOAD_SCALE Yuyang Du
2016-05-05 7:46 ` [PATCH v4] " Ingo Molnar
2016-05-03 20:02 ` Yuyang Du [this message]
2016-05-03 20:02 ` [PATCH v3 10/12] sched/fair: Remove scale_load_down() for load_avg Yuyang Du
2016-05-03 20:02 ` [PATCH v3 11/12] sched/fair: Rename scale_load() and scale_load_down() Yuyang Du
2016-05-03 20:02 ` [PATCH v3 12/12] sched/fair: Enable increased scale for kernel load Yuyang Du
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1462305773-7832-10-git-send-email-yuyang.du@intel.com \
--to=yuyang.du@intel.com \
--cc=bsegall@google.com \
--cc=dietmar.eggemann@arm.com \
--cc=juri.lelli@arm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=morten.rasmussen@arm.com \
--cc=peterz@infradead.org \
--cc=pjt@google.com \
--cc=vincent.guittot@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®