From: Keerthy <j-keerthy@ti.com>
To: <broonie@kernel.org>, <lgirdwood@gmail.com>, <lee.jones@linaro.org>
Cc: <linux-kernel@vger.kernel.org>, <linux-omap@vger.kernel.org>,
<devicetree@vger.kernel.org>, <robh+dt@kernel.org>,
<mark.rutland@arm.com>, <j-keerthy@ti.com>
Subject: [PATCH 1/3] Documentation: mfd/regulator: LP873X: Add information for the mfd and regulator drivers
Date: Thu, 5 May 2016 10:40:38 +0530 [thread overview]
Message-ID: <1462425040-18566-2-git-send-email-j-keerthy@ti.com> (raw)
In-Reply-To: <1462425040-18566-1-git-send-email-j-keerthy@ti.com>
Add information for the mfd and regulator drivers.
Signed-off-by: Keerthy <j-keerthy@ti.com>
---
Documentation/devicetree/bindings/mfd/lp873x.txt | 56 +++++++++++++
.../devicetree/bindings/regulator/lp873x.txt | 98 ++++++++++++++++++++++
2 files changed, 154 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/lp873x.txt
create mode 100644 Documentation/devicetree/bindings/regulator/lp873x.txt
diff --git a/Documentation/devicetree/bindings/mfd/lp873x.txt b/Documentation/devicetree/bindings/mfd/lp873x.txt
new file mode 100644
index 0000000..050d822
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/lp873x.txt
@@ -0,0 +1,56 @@
+TI LP3943 MFD driver
+
+Required properties:
+ - compatible: "ti,lp873x", "ti,lp8732", "ti,lp8733"
+ - reg: I2C slave address.
+
+For the lp873x regulator properties please refer to:
+Documentation/devicetree/bindings/regulator/lp873x.txt
+
+Example:
+
+lp8733: lp8733@60 {
+ compatible = "ti,lp8733";
+ reg = <0x60>;
+
+ regulators {
+ compatible = "ti,lp8733-regulators";
+ buck0 {
+ regulator-name = "lp8733-buck0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-min-microamp = <1500000>;
+ regulator-max-microamp = <4000000>;
+ regulator-ramp-delay = <10000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck1 {
+ regulator-name = "lp8733-buck1";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-min-microamp = <1500000>;
+ regulator-max-microamp = <4000000>;
+ regulator-ramp-delay = <10000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo0 {
+ regulator-name = "lp8733-ldo0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1 {
+ regulator-name = "lp8733-ldo1";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/regulator/lp873x.txt b/Documentation/devicetree/bindings/regulator/lp873x.txt
new file mode 100644
index 0000000..079d8a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/lp873x.txt
@@ -0,0 +1,98 @@
+LP873X family of regulators
+
+Required properties:
+For lp873x Bucks/LDOs
+- compatible:
+ - "ti,lp8733-regulators" for lp8733 PMIC
+ - "ti,lp8732-regulators" for lp8732 PMIC
+ - "ti,lp873x-regulators" for lp8732 PMIC
+
+Examples:
+
+1) LP8733 Regulators:
+
+regulators {
+ compatible = "ti,lp8733-regulators";
+
+ buck0 {
+ regulator-name = "lp8733-buck0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-min-microamp = <1500000>;
+ regulator-max-microamp = <4000000>;
+ regulator-ramp-delay = <10000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck1 {
+ regulator-name = "lp8733-buck1";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-min-microamp = <1500000>;
+ regulator-max-microamp = <4000000>;
+ regulator-ramp-delay = <10000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo0 {
+ regulator-name = "lp8733-ldo0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1 {
+ regulator-name = "lp8733-ldo1";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+1) LP8732 Regulators:
+
+regulators {
+ compatible = "ti,lp8732-regulators";
+
+ buck0 {
+ regulator-name = "lp8732-buck0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-min-microamp = <1500000>;
+ regulator-max-microamp = <4000000>;
+ regulator-ramp-delay = <10000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck1 {
+ regulator-name = "lp8732-buck1";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-min-microamp = <1500000>;
+ regulator-max-microamp = <4000000>;
+ regulator-ramp-delay = <10000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo0 {
+ regulator-name = "lp8732-ldo0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1 {
+ regulator-name = "lp8732-ldo1";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
--
1.9.1
next prev parent reply other threads:[~2016-05-05 5:16 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-05 5:10 [PATCH 0/3] mfd: lp873x: Add lp873x PMIC support Keerthy
2016-05-05 5:10 ` Keerthy [this message]
2016-05-05 5:10 ` [PATCH] " Keerthy
2016-05-05 8:35 ` Manish Badarkhe
2016-05-06 4:08 ` Keerthy
2016-05-05 5:10 ` [PATCH 3/3] regulator: lp873x: Add support for lp873x PMIC regulators Keerthy
2016-05-05 15:38 ` Mark Brown
2016-05-06 4:43 ` Keerthy
2016-05-06 12:02 ` Mark Brown
2016-05-06 12:36 ` Keerthy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1462425040-18566-2-git-send-email-j-keerthy@ti.com \
--to=j-keerthy@ti.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®