From: Amitkumar Karwar <akarwar@marvell.com>
To: <linux-bluetooth@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>,
Ganapathi Bhat <gbhat@marvell.com>,
Amitkumar Karwar <akarwar@marvell.com>
Subject: [PATCH v11 1/3] Bluetooth: hci_uart: add prepare callbacks to hci_uart_proto structure.
Date: Fri, 6 May 2016 08:31:52 -0700 [thread overview]
Message-ID: <1462548714-7971-1-git-send-email-akarwar@marvell.com> (raw)
From: Ganapathi Bhat <gbhat@marvell.com>
The new callback is used to prepare the device before HCI becomes
ready. One can use this to download firmware if the download process
doesn't use HCI commands. Also recv_for_prepare callback is
introduced for receiving data from devices during prepare phase.
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
---
drivers/bluetooth/hci_ldisc.c | 11 ++++++++++-
drivers/bluetooth/hci_uart.h | 3 +++
2 files changed, 13 insertions(+), 1 deletion(-)
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index 49b3e1e..b4ee682 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -551,8 +551,11 @@ static void hci_uart_tty_receive(struct tty_struct *tty, const u8 *data,
if (!hu || tty != hu->tty)
return;
- if (!test_bit(HCI_UART_PROTO_READY, &hu->flags))
+ if (!test_bit(HCI_UART_PROTO_READY, &hu->flags)) {
+ if (hu->proto->recv_for_prepare)
+ hu->proto->recv_for_prepare(hu, data, count);
return;
+ }
/* It does not need a lock here as it is already protected by a mutex in
* tty caller
@@ -639,6 +642,12 @@ static int hci_uart_set_proto(struct hci_uart *hu, int id)
return err;
hu->proto = p;
+ if (p->prepare) {
+ err = p->prepare(hu);
+ if (err)
+ return err;
+ }
+
set_bit(HCI_UART_PROTO_READY, &hu->flags);
err = hci_uart_register_dev(hu);
diff --git a/drivers/bluetooth/hci_uart.h b/drivers/bluetooth/hci_uart.h
index 839bad1..17ba3b4 100644
--- a/drivers/bluetooth/hci_uart.h
+++ b/drivers/bluetooth/hci_uart.h
@@ -67,8 +67,11 @@ struct hci_uart_proto {
int (*close)(struct hci_uart *hu);
int (*flush)(struct hci_uart *hu);
int (*setup)(struct hci_uart *hu);
+ int (*prepare)(struct hci_uart *hu);
int (*set_baudrate)(struct hci_uart *hu, unsigned int speed);
int (*recv)(struct hci_uart *hu, const void *data, int len);
+ int (*recv_for_prepare)(struct hci_uart *hu, const void *data,
+ int len);
int (*enqueue)(struct hci_uart *hu, struct sk_buff *skb);
struct sk_buff *(*dequeue)(struct hci_uart *hu);
};
--
1.8.1.4
next reply other threads:[~2016-05-06 15:32 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-06 15:31 Amitkumar Karwar [this message]
2016-05-06 15:31 ` [PATCH v11 2/3] Bluetooth: hci_uart: check if hdev is present before using it Amitkumar Karwar
2016-06-24 6:01 ` [v11, " Jeffy Chen
2016-05-06 15:31 ` [PATCH v11 3/3] Bluetooth: hci_uart: Support firmware download for Marvell Amitkumar Karwar
2016-05-10 13:59 ` Amitkumar Karwar
2016-05-23 6:06 ` Amitkumar Karwar
2016-06-14 6:35 ` Amitkumar Karwar
2016-06-21 3:47 ` [v11,3/3] " Caesar Wang
2016-06-24 6:02 ` Jeffy Chen
2016-06-27 6:28 ` Amitkumar Karwar
2016-06-30 10:54 ` Loic Poulain
2016-08-09 16:18 ` Amitkumar Karwar
2016-06-24 6:01 ` [v11, 1/3] Bluetooth: hci_uart: add prepare callbacks to hci_uart_proto structure Jeffy Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1462548714-7971-1-git-send-email-akarwar@marvell.com \
--to=akarwar@marvell.com \
--cc=gbhat@marvell.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®