[PATCH 1/2] perf/x86/intel/pt: Generate PMI in the STOP region as well

[Alexander Shishkin <alexander.shishkin@linux.intel.com>]

Currently, the PT driver always sets the PMI bit one region (page) before
the STOP region so that we can wake up the consumer before we run out of
room in the buffer and have to disable the event. However, we also need
an interrupt in the last output region, so that we actually get to disable
the event (if no more room from new data is available at that point),
otherwise hardware just quietly refuses to start, but the event is
scheduled in and we end up losing trace data till the event gets removed.

For a cpu-wide event it is even worse since there may not be any
re-scheduling at all and no chance for the ring buffer code to notice
that its buffer is filled up and the event needs to be disabled (so that
the consumer can re-enable it when it finishes reading the data out). In
other words, all the trace data will be lost after the buffer gets filled
up.

This patch makes PT also generate a PMI when the last output region is
full.

Reported-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
---
 arch/x86/events/intel/pt.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/x86/events/intel/pt.c b/arch/x86/events/intel/pt.c
index 5b648d4a94..a157cf67a9 100644
--- a/arch/x86/events/intel/pt.c
+++ b/arch/x86/events/intel/pt.c
@@ -861,6 +861,7 @@ static int pt_buffer_reset_markers(struct pt_buffer *buf,
 
 	/* clear STOP and INT from current entry */
 	buf->topa_index[buf->stop_pos]->stop = 0;
+	buf->topa_index[buf->stop_pos]->intr = 0;
 	buf->topa_index[buf->intr_pos]->intr = 0;
 
 	/* how many pages till the STOP marker */
@@ -885,6 +886,7 @@ static int pt_buffer_reset_markers(struct pt_buffer *buf,
 	buf->intr_pos = idx;
 
 	buf->topa_index[buf->stop_pos]->stop = 1;
+	buf->topa_index[buf->stop_pos]->intr = 1;
 	buf->topa_index[buf->intr_pos]->intr = 1;
 
 	return 0;
-- 
2.8.1