[PATCH net-next 2/2] net: dsa: mv88e6xxx: add STU capability

[Vivien Didelot <vivien.didelot@savoirfairelinux.com>]

Some switch models have a STU (per VLAN port state database). Add a new
capability flag to switches info, instead of checking their family.

Also if the 6165 family has an STU, it must have a VTU, so add the
MV88E6XXX_FLAG_VTU to its family flags.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
---
 drivers/net/dsa/mv88e6xxx.c | 14 ++------------
 drivers/net/dsa/mv88e6xxx.h | 16 ++++++++++++++--
 2 files changed, 16 insertions(+), 14 deletions(-)

diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c
index 92be27d..835126e 100644
--- a/drivers/net/dsa/mv88e6xxx.c
+++ b/drivers/net/dsa/mv88e6xxx.c
@@ -453,16 +453,6 @@ static bool mv88e6xxx_has_fid_reg(struct mv88e6xxx_priv_state *ps)
 	return false;
 }
 
-static bool mv88e6xxx_has_stu(struct mv88e6xxx_priv_state *ps)
-{
-	/* Does the device have STU and dedicated SID registers for VTU ops? */
-	if (mv88e6xxx_6097_family(ps) || mv88e6xxx_6165_family(ps) ||
-	    mv88e6xxx_6351_family(ps) || mv88e6xxx_6352_family(ps))
-		return true;
-
-	return false;
-}
-
 /* We expect the switch to perform auto negotiation if there is a real
  * phy. However, in the case of a fixed link phy, we force the port
  * settings from the fixed link settings.
@@ -1599,7 +1589,7 @@ static int _mv88e6xxx_vtu_getnext(struct mv88e6xxx_priv_state *ps,
 			next.fid |= ret & 0xf;
 		}
 
-		if (mv88e6xxx_has_stu(ps)) {
+		if (mv88e6xxx_has(ps, MV88E6XXX_FLAG_STU)) {
 			ret = _mv88e6xxx_reg_read(ps, REG_GLOBAL,
 						  GLOBAL_VTU_SID);
 			if (ret < 0)
@@ -1686,7 +1676,7 @@ static int _mv88e6xxx_vtu_loadpurge(struct mv88e6xxx_priv_state *ps,
 	if (ret < 0)
 		return ret;
 
-	if (mv88e6xxx_has_stu(ps)) {
+	if (mv88e6xxx_has(ps, MV88E6XXX_FLAG_STU)) {
 		reg = entry->sid & GLOBAL_VTU_SID_MASK;
 		ret = _mv88e6xxx_reg_write(ps, REG_GLOBAL, GLOBAL_VTU_SID, reg);
 		if (ret < 0)
diff --git a/drivers/net/dsa/mv88e6xxx.h b/drivers/net/dsa/mv88e6xxx.h
index ca69a93..5f09a4e 100644
--- a/drivers/net/dsa/mv88e6xxx.h
+++ b/drivers/net/dsa/mv88e6xxx.h
@@ -403,6 +403,12 @@ enum mv88e6xxx_cap {
 	 */
 	MV88E6XXX_CAP_SMI_PHY,
 
+	/* Per VLAN Spanning Tree Unit (STU).
+	 * The Port State database, if present, is accessed through VTU
+	 * operations and dedicated SID registers. See GLOBAL_VTU_SID.
+	 */
+	MV88E6XXX_CAP_STU,
+
 	/* Switch MAC/WoL/WoF register.
 	 * This requires an indirect access to set the switch MAC address
 	 * through GLOBAL2_SWITCH_MAC, otherwise GLOBAL_MAC_01, GLOBAL_MAC_23,
@@ -436,6 +442,7 @@ enum mv88e6xxx_cap {
 #define MV88E6XXX_FLAG_PPU		BIT(MV88E6XXX_CAP_PPU)
 #define MV88E6XXX_FLAG_PPU_ACTIVE	BIT(MV88E6XXX_CAP_PPU_ACTIVE)
 #define MV88E6XXX_FLAG_SMI_PHY		BIT(MV88E6XXX_CAP_SMI_PHY)
+#define MV88E6XXX_FLAG_STU		BIT(MV88E6XXX_CAP_STU)
 #define MV88E6XXX_FLAG_SWITCH_MAC	BIT(MV88E6XXX_CAP_SWITCH_MAC_WOL_WOF)
 #define MV88E6XXX_FLAG_TEMP		BIT(MV88E6XXX_CAP_TEMP)
 #define MV88E6XXX_FLAG_TEMP_LIMIT	BIT(MV88E6XXX_CAP_TEMP_LIMIT)
@@ -451,12 +458,15 @@ enum mv88e6xxx_cap {
 #define MV88E6XXX_FLAGS_FAMILY_6097	\
 	(MV88E6XXX_FLAG_ATU |		\
 	 MV88E6XXX_FLAG_PPU |		\
+	 MV88E6XXX_FLAG_STU |		\
 	 MV88E6XXX_FLAG_VLANTABLE |	\
 	 MV88E6XXX_FLAG_VTU)
 
 #define MV88E6XXX_FLAGS_FAMILY_6165	\
-	(MV88E6XXX_FLAG_SWITCH_MAC |	\
-	 MV88E6XXX_FLAG_TEMP)
+	(MV88E6XXX_FLAG_STU |		\
+	 MV88E6XXX_FLAG_SWITCH_MAC |	\
+	 MV88E6XXX_FLAG_TEMP |		\
+	 MV88E6XXX_FLAG_VTU)
 
 #define MV88E6XXX_FLAGS_FAMILY_6185	\
 	(MV88E6XXX_FLAG_ATU |		\
@@ -482,6 +492,7 @@ enum mv88e6xxx_cap {
 	 MV88E6XXX_FLAG_PORTSTATE |	\
 	 MV88E6XXX_FLAG_PPU_ACTIVE |	\
 	 MV88E6XXX_FLAG_SMI_PHY |	\
+	 MV88E6XXX_FLAG_STU |		\
 	 MV88E6XXX_FLAG_SWITCH_MAC |	\
 	 MV88E6XXX_FLAG_TEMP |		\
 	 MV88E6XXX_FLAG_VLANTABLE |	\
@@ -494,6 +505,7 @@ enum mv88e6xxx_cap {
 	 MV88E6XXX_FLAG_PORTSTATE |	\
 	 MV88E6XXX_FLAG_PPU_ACTIVE |	\
 	 MV88E6XXX_FLAG_SMI_PHY |	\
+	 MV88E6XXX_FLAG_STU |		\
 	 MV88E6XXX_FLAG_SWITCH_MAC |	\
 	 MV88E6XXX_FLAG_TEMP |		\
 	 MV88E6XXX_FLAG_TEMP_LIMIT |	\
-- 
2.8.2