From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753169AbcELOrP (ORCPT ); Thu, 12 May 2016 10:47:15 -0400 Received: from mx07-00178001.pphosted.com ([62.209.51.94]:53655 "EHLO mx07-00178001.pphosted.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753109AbcELOrM (ORCPT ); Thu, 12 May 2016 10:47:12 -0400 From: To: , Linus Walleij , , Maxime Coquelin CC: Subject: [PATCH 1/2] pinctrl: stm32: fix warning Date: Thu, 12 May 2016 16:46:34 +0200 Message-ID: <1463064395-4669-2-git-send-email-patrice.chotard@st.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1463064395-4669-1-git-send-email-patrice.chotard@st.com> References: <1463064395-4669-1-git-send-email-patrice.chotard@st.com> MIME-Version: 1.0 Content-Type: text/plain X-Originating-IP: [10.48.1.66] X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10432:,, definitions=2016-05-12_07:,, signatures=0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Patrice Chotard fix compilation warning : drivers/pinctrl/stm32/pinctrl-stm32.c:823:7: warning: too many arguments for format [-Wformat-extra-args] speeds[speed], "speed"); Signed-off-by: Patrice Chotard --- drivers/pinctrl/stm32/pinctrl-stm32.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/pinctrl/stm32/pinctrl-stm32.c b/drivers/pinctrl/stm32/pinctrl-stm32.c index 1527740..249da52 100644 --- a/drivers/pinctrl/stm32/pinctrl-stm32.c +++ b/drivers/pinctrl/stm32/pinctrl-stm32.c @@ -806,21 +806,21 @@ static void stm32_pconf_dbg_show(struct pinctrl_dev *pctldev, drive = stm32_pconf_get_driving(bank, offset); speed = stm32_pconf_get_speed(bank, offset); val = stm32_pconf_output_get(bank, offset); - seq_printf(s, "- %s - %s - %s - %s %s", + seq_printf(s, "- %s - %s - %s - %s speed", val ? "high" : "low", drive ? "open drain" : "push pull", biasing[bias], - speeds[speed], "speed"); + speeds[speed]); break; /* alternate */ case 2: drive = stm32_pconf_get_driving(bank, offset); speed = stm32_pconf_get_speed(bank, offset); - seq_printf(s, "%d - %s -%s", alt, + seq_printf(s, "%d - %s -%s - %s speed", alt, drive ? "open drain" : "push pull", biasing[bias], - speeds[speed], "speed"); + speeds[speed]); break; /* analog */ -- 1.9.1