From: <patrice.chotard@st.com>
To: <linux-kernel@vger.kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
<linux-arm-kernel@lists.infradead.org>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: <patrice.chotard@st.com>
Subject: [PATCH 2/2] pinctrl: stm32: factorize stm32_pconf_input/output_get()
Date: Thu, 12 May 2016 16:46:35 +0200 [thread overview]
Message-ID: <1463064395-4669-3-git-send-email-patrice.chotard@st.com> (raw)
In-Reply-To: <1463064395-4669-1-git-send-email-patrice.chotard@st.com>
From: Patrice Chotard <patrice.chotard@st.com>
As these 2 functions code are 95% similar, factorize them.
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
---
drivers/pinctrl/stm32/pinctrl-stm32.c | 31 ++++++++++---------------------
1 file changed, 10 insertions(+), 21 deletions(-)
diff --git a/drivers/pinctrl/stm32/pinctrl-stm32.c b/drivers/pinctrl/stm32/pinctrl-stm32.c
index 249da52..8b82d3e 100644
--- a/drivers/pinctrl/stm32/pinctrl-stm32.c
+++ b/drivers/pinctrl/stm32/pinctrl-stm32.c
@@ -661,8 +661,8 @@ static u32 stm32_pconf_get_bias(struct stm32_gpio_bank *bank,
return (val >> (offset * 2));
}
-static bool stm32_pconf_input_get(struct stm32_gpio_bank *bank,
- unsigned int offset)
+static bool stm32_pconf_get(struct stm32_gpio_bank *bank,
+ unsigned int offset, bool dir)
{
unsigned long flags;
u32 val;
@@ -670,23 +670,12 @@ static bool stm32_pconf_input_get(struct stm32_gpio_bank *bank,
clk_enable(bank->clk);
spin_lock_irqsave(&bank->lock, flags);
- val = !!(readl_relaxed(bank->base + STM32_GPIO_IDR) & BIT(offset));
-
- spin_unlock_irqrestore(&bank->lock, flags);
- clk_disable(bank->clk);
-
- return val;
-}
-
-static bool stm32_pconf_output_get(struct stm32_gpio_bank *bank,
- unsigned int offset)
-{
- unsigned long flags;
- u32 val;
-
- clk_enable(bank->clk);
- spin_lock_irqsave(&bank->lock, flags);
- val = !!(readl_relaxed(bank->base + STM32_GPIO_ODR) & BIT(offset));
+ if (dir)
+ val = !!(readl_relaxed(bank->base + STM32_GPIO_IDR) &
+ BIT(offset));
+ else
+ val = !!(readl_relaxed(bank->base + STM32_GPIO_ODR) &
+ BIT(offset));
spin_unlock_irqrestore(&bank->lock, flags);
clk_disable(bank->clk);
@@ -795,7 +784,7 @@ static void stm32_pconf_dbg_show(struct pinctrl_dev *pctldev,
switch (mode) {
/* input */
case 0:
- val = stm32_pconf_input_get(bank, offset);
+ val = stm32_pconf_get(bank, offset, true);
seq_printf(s, "- %s - %s",
val ? "high" : "low",
biasing[bias]);
@@ -805,7 +794,7 @@ static void stm32_pconf_dbg_show(struct pinctrl_dev *pctldev,
case 1:
drive = stm32_pconf_get_driving(bank, offset);
speed = stm32_pconf_get_speed(bank, offset);
- val = stm32_pconf_output_get(bank, offset);
+ val = stm32_pconf_get(bank, offset, false);
seq_printf(s, "- %s - %s - %s - %s speed",
val ? "high" : "low",
drive ? "open drain" : "push pull",
--
1.9.1
next prev parent reply other threads:[~2016-05-12 14:47 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-12 14:46 [PATCH 0/2] pinctrl: stm32: .pin_config_dbg_show fixes patrice.chotard
2016-05-12 14:46 ` [PATCH 1/2] pinctrl: stm32: fix warning patrice.chotard
2016-05-12 14:46 ` patrice.chotard [this message]
2016-05-24 11:04 ` [PATCH 0/2] pinctrl: stm32: .pin_config_dbg_show fixes Linus Walleij
2016-05-24 11:12 ` Patrice Chotard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1463064395-4669-3-git-send-email-patrice.chotard@st.com \
--to=patrice.chotard@st.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mcoquelin.stm32@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®